Reaction in the Event of a Fault

If a fault occurs, the module adopts the safe state and the assigned input variables transmit the

initial value (default value = 0) to the user program.

The initial values must be set to 0 to ensure that the input variables transmit the value 0 to the

user program if a fault occurs. If the raw value is evaluated instead of the process value, the

user must program the monitoring function and the value in the event of faults from within the

user program.

The module activates the Error LED on the front plate.

Scope of Delivery

The module must be installed on a suitable connector board to be able to operate. If a Field

Termination Assembly (FTA) is used, a system cable is required to connect the connector board

to the FTA. Connector boards, system cables and FTAs are not included within the scope of

delivery.

The connector boards are described in Chapter 3.6. the system cables are described in

Chapter 3.7. The FTAs are described in own manuals.