Driver

Driver 1: CS3 for STRUC version 3:

This variant acts like a CS3 MMC communication board with the following properties:

 The board can only be used in sub-racks with C-bus connection (i. e. SR12 or

SR24. or SR1 and SR5. respectively)

 The board can only communicate with P16 processor modules that have the C-bus

connection, i.e. not with the technology processors (e.g. PG16. PG26. PS16.

PT20/G/M)

 The board features a dual-port RAM (DPR) with a memory capacity of 16 KB

 The MMC “COMNET” protocol is used as the communication protocol. All data is

exchanged, including initialization tasks and monitoring functions, according to this

protocol.

Driver 2: CS12 for STRUC version 4:

This variant acts like a CS12 fiber-optic interface module with the following properties:

 The board can only be used in sub-racks with C-bus connection (i.e. SR12 or

SR24)

 The board can also communicate with P32 processor modules. The P32 proces

sors are all equipped with a C-bus connection

 The board features a dual-port RAM (DPR) with a memory capacity of 32 KB

 The CIP3 protocol is used as the communication protocol. All data is exchanged,

including initialization tasks and monitoring functions, according to this protocol

Regardless of the variants of the drivers and the STRUC-version, the board is well em

bedded in the SIMADYN D environment:

 Data is exchanged in SIMADYN D with standard modules.

 The board is initialized with a standard central module.

 SIMADYN D and the iba system connected can be switched on and off fully inde

pendent of each other. SIMADYN D can also run without the iba system connected

and visa versa

 The execution cycle in the ibaLink-SM-64-SD16 is 1 ms