The IC695ETM001 has an Ethernet processor speed of 200 MHz. it is equipped with LED status indicators.

The IC695ETM001 has Ethernet processor speed of 200 MHz. It is equipped with LED status indicators such as Ethernet OK, LAN OK, Log Clear, Individual Port and Speed LED status indicators.

The IC695ETM001 can be installed with compatible backplanes IC695CHS007. CHS012. or CHS016.

It is compatible with any other PACSystem RX3i module except the CPE400. It is best installed on an unpowered RX3i backplane.

However, it also supports plugging in when power is present or when the processor is in run mode. This is also referred to as the hot-swap feature.

Firmware version 2.51 must be installed to enable hot plugging.

The IC695ETM001 module also provides an www.cniacs.com RS-232 serial port that supports data rates from 1200 bps to 115200 bps.

The module’s built-in Station Manager feature is accessible via both the serial port and Ethernet connection and provides monitoring access.

Services provided by the station manager include commands for polling and controlling stations, access for monitoring statistics, logging and configuration parameters, and password security.

The IC695ETM001 module can be used to synchronise timestamps exchanged by the EGD via the SNTP protocol.

Functions of the IC695ETM001 module include PLC configuration and programming functions, periodic data exchange via EGD,

The IC695ETM001 module can be installed in any empty RX3i slot.

The IC695ETM001 module is hot-swappable. Module firmware can be field upgraded using software tools provided by GE Fanuc.