Benefits

Saves Time

Easy to Install and Simple to Operate

Does not require commissioning.

Up and running in less than 10 minutes.

Motors Last Longer

Proprietary CL Software

Provides overload protection,

prevents motor burnout

and eliminates nuisance tripping.

UL approved as electronic overload

protector for motors.

Energy Saving

Uses only the power the application requires.

Replacing constant speed with variable speed

will significantly reduce energy costs.

Customization for OEM’s

When an off the shelf drive does not meet your needs,

KB will work with you to provide a custom drive solution, Ready to Use, “Out-of-the-Box.”

Customization includes: Pre-calibrating or programming of a stock control, adding a custom label or branding,

custom software, PLC functions or designing a new control.

Additional Features

Sensorless Flux Vector Control

Flux Vector Compensation with Static Auto-Tune provides excellent speed regulation

with high torque loads throughout the entire speed range. Auto energy saving at light

loads. Smooth motor torque.

Electronic Inrush Current Limit (EICL™) Protection

Eliminates harmful inrush AC line current during power up.

Ride-Through

Provides smooth recovery to the previous set speed during a momentary power loss.

Holding Torque at Zero Speed

Resists motor shaft rotation when the drive is in “Stop” mode.

Regeneration Protection

Eliminates tripping due to high bus voltage caused by rapid deceleration of high

inertial loads.

Undervoltage and Overvoltage Protection

Shuts down the drive if the AC line input voltage goes above or below

the operating range.

Short Circuit Protection

Shuts down the drive if a short circuit occurs at the motor (phase-to-phase).

Trimpot Adjustments

Min. Speed, Max. Speed, Accel, Decel, Current Limit, Slip Comp.