Welcome to the official website of CNIACS Automation Technology Co., Ltd!
0
February 21, 2025 BY
IN Woodward

Woodward SECM70 Pin Small Engine Control Module

Features and Functions

The SECM70 is part of the MotoHawk® family of control solutions. These products allow for rapid development of control systems.

The combination of off-the-shelf hardware and MotoHawk software allows developers to focus on the operational details of the application without worrying about the design details of the hardware.

The result is that the same hardware used in development and prototyping can be used in ongoing production.

The unit offers 70 connector pins with inputs, outputs and communication interfaces to support a wide variety of applications.

The SECM70 MY17 hardware can be calibrated in real-time using MotoTune®, ToolKit, or commercially available calibration applications.

The 8923-2588 includes the 1751-6773 module and mounting kit.

Features:

70-pin platform

Microprocessor: ST SPC5642A, 120 MHz

Memory: 2M Flash, 128K RAM, 16K Serial EEPROM

Calibratable Memory: 34K FLASH

Operating voltage: 8-32 Vdc, 36 V (jumper start), 5.5 V (crank)

Operating temperature: -40 °C to +105 °C

Inputs:

VR or digital crank position sensor

Digital cam position sensor

13 Analog

5 Digital switches

1 Switched Oxygen Sensor

1 Wide Range Oxygen Sensor

2 Burst Sensors

Outputs:

8 electronic spark triggers for smart ignition coils

9 low-side drivers, 3 lamp drivers

1 main power relay driver to power engine electrical components

2 H-bridge drivers for electric throttle and actuator

1 sensor power (5 V) output
February 21, 2025 BY
IN Woodward

Woodward PCM112-14 Small Engine Powertrain Control Module

Applications

The PCM112 control platform is suitable for a variety of applications, including powertrain control and electric vehicle monitoring applications.

At the heart of the PCM112 control is a powerful 32-bit Freescale MPC5644A microprocessor and an auxiliary 16-bit Freescale MC9S12G microcontroller.

Both run Woodward’s ControlCore operating system. Application programming is done through Woodward’s MotoHawk application software tool.

MotoHawk is a rapid control system development tool that allows control engineers to quickly create control software directly in a Simulink diagram that runs on any MotoHawk-enabled control system.

MotoHawk runs on the MotoHawk electronics control module. Application developers working directly in the Simulink environment.

One-step builds transform application models into files that can be programmed directly into DeWalt production hardware.

MotoHawk provides an advanced programming environment for users with control system expertise but not necessarily specific embedded programming skills.

Once the application is generated and loaded into the PCM112 controller via the CAN port.

users can view variables and adjust controls using appropriate service interface tools such as Woodward’s ToolKit or MotoTune.

Connections to other devices, such as diagnostic tools, are available through other CAN ports on the controller. The required information flow is programmed into the controller via MotoTune or ToolKit.

The PCM112 controller consists of a rigid printed circuit board that is adhered to an aluminum housing using thermal adhesive, then closed and sealed with an aluminum cover.

Connection to the controller is made via three automotive style sealed connectors. The controller can be mounted directly to the engine or frame using vibration isolators.

At the heart of the PCM112 controller is a powerful 32-bit Freescale MPC5644A microprocessor

and an auxiliary 16-bit Freescale MC9S12G microcontroller, both running Woodward’s ControlCore operating system.
February 21, 2025 BY
IN Woodward

Woodward MicroNet TMR Triple Modular Redundant Controller Control System


Description

The MicroNet TMR® control platform features a ruggedized rackmount chassis with in-line replaceable I/O modules and triple modular architecture for 99.999% availability.

This triple modular redundancy-based system consists of three independent cores (A, B, and C) housed in the platform’s compact chassis.

Each core section includes its own CPU, CPU power supply, and up to four I/O modules, which can be used for simplex I/O, redundant I/O, triple redundant I/O, or any combination of redundancy.

I/O can be expanded via a system expansion chassis or the ruggedized LinkNet HT Distributed I/O.

The platform’s high-density modules and integrated application software reduce troubleshooting time by providing first-out indication of monitored system events.

These specialized modules can time stamp discrete events in 1 millisecond and analog events in 5 milliseconds.

The MicroNet TMR® utilizes two power supplies, each supplying power to the controller from a separate power source. Within each power supply are three independent power converters, one each for the CPU and I/O sections.The MicroNet TMR®’s “2-out-of-3” voting structure ensures that problems are responded to correctly and that prime movers continue to operate safely with or without any single point of failure.

The controller’s robustness, fault tolerance, accuracy and availability make it the first choice for turbine and compressor OEMs and operators worldwide.

The superior architecture and diagnostic coverage of the MicroNet TMR® results in 99.999% system availability and reliability.The MicroNet TMR® can be

MicroNet TMR® can be used as a component of a protection and safety system, making the entire system compliant with IEC61508 SIL-3. IEC61508 calculation and application assistance.

 Typical MicroNet TMR® application experience and use:

 Refrigeration compressors (ethylene, propylene)

 Methane and Syngas Compressors

 Gas Cracking Compressors

 Gas charging compressors

 Hydrogen Recovery Compressors

 Critical turbine generator sets

 Turbine Safety Systems

For IEC61508 SIL-3 based applications, MicroNet systems require a MicroNet Safety Module (MSM).

The MSM serves as the system’s SIL-3 logic solver, and its fast (12 ms) response time and integrated overspeed and acceleration detection/protection make it ideal for critical high-speed rotating motor, compressor, turbine or engine applications.
February 21, 2025 BY
IN A-B

A-B Rockwell 825-MCM20 Bulletin 825 Converter Module

DESCRIPTION

The 825-MCM20 is a currency converter module from Allen-Bradley.

It is part of the 825-P Motor Modular Protection System and is rated for 690 VAC (IEC) and 600 VAC (CSA/UL).

It has an inrush rating of 6 kV, an operating current range of 2.5-20 amps, a continuous thermal current of 24 amps, 

a saturation current rating of 240 amps, and a frequency rating of 50/60 Hz ± 3 Hz.

The converter has a PTC thermistor input and supports six (6) sensors in series.

About the 825-MCM20

The 825-MCM20 is Allen-Bradley’s currency converter module. It is part of the Bulletin 825-P Motor Protection System.

The device is designed primarily to protect industrial three-phase motors, providing thermal overload, 

PTC (positive temperature coefficient) overheat, undercurrent (load loss), current unbalance, and phase loss,

overcurrent (load jamming), short circuit, ground fault (residual), ground fault (zero sequence), 

frequency and other protective functions, as well as motor start/run and other motor start and run protection functions, such as a variety of motor start and run protection.

Protection prohibition at start, start motor timer, notch or pointing device, TCU (thermal capacity utilization) start prohibition, anti-reverse rotation timer, emergency start,

two-speed protection, reduced voltage start (star-delta) and stall switch.

The 825-MCM20 module is specifically designed for use in a variety of line starter applications,

especially low and medium voltage with 2 or 3 potential transformers, with or without phase current transformers,

with or without zero sequence core balancing current transformers, with or without external RTD module, reversing starters, star delta starters and two speed motors.
February 21, 2025 BY
IN A-B

A-B 825-P Motor Relay Used as a protective device for three-phase motors

DESCRIPTION: The Allen-Bradley 825-P is a motor relay used as a protective device for three-phase motors.

It has standard protection features such as thermal overload (thermal model, PTC (positive temperature coefficient), overheat, undercurrent (load loss),

current unbalance and phase loss, overcurrent (load seizure), short circuit, ground fault (residual), ground fault (zero sequence), motor start/run and frequency. This unit requires 110-240VAC power input.

About the 825-P

The 825-P is a protective relay for use with three-phase motors. Manufactured by Allen-Bradley, the device is

It provides standard protections such as thermal overload (thermal modeling), PTC (positive temperature coefficient), overheat, undercurrent (load loss), current imbalance, and phase loss.

overcurrent (load seizure), short circuit, ground fault (residual), ground fault (zero sequence), motor start/run and frequency.

For motor start/run protection, this motor relay is capable of starting the motor timer via a protection disable during startup, a startup

notch or pointing device, TCU (Thermal Capacity Utilization) start inhibit, anti-reverse spin timer, emergency start, two-speed protection, reduced voltage start (star-delta), and stall switching to protect the motor.
February 21, 2025 BY
IN A-B

A-B Rockwell 2093-AC05-MP1 Multi-Axis Servo Drive

Descripción

The 2093-AC05-MP1 drive is an Allen-Bradley/Rockwell Automation Kinetix 2000 Series multi-axis servo drive.

It is also an Integrated Axis Module type servo drive. 2093-AC05-MP1 Multi-Axis Servo Drives require clearance on the top and bottom for air-cooling, but not on the left or right sides.

This servo drive can be used with compatible SERCOS fiber optic cables.The 2093-AC05-MP1 Multi-Axis Servo Drive has a three-phase mains input voltage range of 170 to 264 volts AC.

About the 2093-AC05-MP1

The Kinetix 2000 Multi-Axis Servo Drives have output power requirements between 3 – 45 kW (4 – 49 amps) and are designed to provide Kinetix integrated motion solutions for applications.

Kinetix 2000 multi-axis servo drives are available in several series, including the 2093-AC05-MPx, 2093-AM0x, 2093-AMPx, 2093-ASP06.

2093-PRSxx, 2093-PRF, 2094-AL09. 2094-AL15S, 2094-AL25S, 2094-AL50S,

2094-AL75S, and 2094-AL75S-C2. 2093-AC05-MPx is a family of Kinetix 2000 multi-axis servo drives.

It includes the 2093-AC05-MP1. 2093-AC05-MP2. and 2093-AC05-MP5.The 2093-AC05-MP1 consists of one specific assembly.

The 2093-AC05-MP1 consists of a specific assembly that includes the Integrated Axis Module (IAM) mounted on the power rails and is a 230 VAC power converter and inverter.

The power rails (PR) consist of copper bus bars and circuit boards with connectors for each module.

The power rail provides power and control signals from the inverter section to the adjacent inverter, which also consists of compatible servo motors (low inertia, food grade, and stainless steel) and compatible linear actuators.
February 21, 2025 BY
IN B&R

The B&R Bergerac X20CP1586 is a powerful controller for the X20 system

Description:

.Intel Atom 1.6 GHz processor with additional I/O processor

. Onboard Ethernet, POWERLINK with polled response chain and USB.

. 1 slot for modular interface expansion .

.CompactFlash as removable application memory

.512 MB DDR2 memory

.512 MB DDR2 RAM Fanless

The X20CP1586 is a powerful controller for the X20 system. 

This controller is especially suited for applications that require short cycle times, must process large amounts of data, or perform floating-point operations.

It is clocked at 1.6 GHz and comes with 512 MB of DDR2 SDRAM.

USB, Ethernet, POWERLINK and removable CompactFlash are included as standard features.

The standard Ethernet interface is capable of handling communications in the gigabit range. 

For more real-time network performance, the on-board POWERLINK interface supports Polled Response Chain mode (PRC).

The controller is equipped with a slot for an X20 communication module.

By using communication modules, various bus and network systems can be easily integrated into the X20 system.
February 21, 2025 BY
IN ALSTOM

ALSTOM GDS1168-6112 Inverter power unit

Frequency inverter unit:

Frequency inverters are power control devices used to control AC motors by changing the frequency of the motor’s operating power supply to achieve control of the motor’s speed.

Alstom Group’s inverters may be characterized by high efficiency, high reliability and environmental friendliness for a wide range of industrial and commercial applications.

GDS1168-6112 specific model information:

Since the specific GDS1168-6112 model information is not mentioned in detail in the referenced article, it is not possible to provide specific performance parameters, technical specifications or application scenarios.

However, it can be assumed that this model may be a customized inverter unit from Alstom Group for specific needs or industries.

GeneralE board function:

The GeneralE board may be a key component in the GDS1168-6112 inverter unit responsible for functions such as control, monitoring or interfacing with other systems.

Specific functions and features may include data processing, communication interfaces, control logic, etc.

Alstom’s GDS1168-6112 inverter unit may be a customized inverter product for a specific industry or application requirement where the GeneralE board is one of the key components.
February 21, 2025 BY
IN ABB

ABB AC500 V3 PLC Enhanced connectivity and performance

AC500 V3

Extension of the existing AC500 family

Our four new AC500 V3 CPUs extend the existing AC500 V2 CPU family.The V3 CPUs utilize state-of-the-art technology to enhance connectivity, performance and speed, and extend the memory of the AC500 series. For convenience, the new CPUs are compatible with the existing AC500 series.

This means that whether you are looking for new applications to meet new needs such as network security requirements or cloud connectivity, or simply want to leverage and protect your existing 

AC500 investment by switching to new advanced technology, the AC500 V3 has you covered.

AC500 V3 New features and higher performance

The flexibility, scalability and footprint of AC500 V2 have been passed on to the new CPU range. 

Therefore, AC500 continues to be the perfect fit for various applications or will be the natural  successor when you need to introduce new features to existing applications or extend machines and applications to reach for the cloud.

The new V3 features provide even more flexibility and freedom when it comes to connectivity and functions supplied onboard without the need of additional devices as couplers or switches. AC500 V3 is ready for the requirements of IoT and digitalization and secure cloud connectivity via new protocols and functions.

Built-in performance

 • Faster CPUs with more powerful processors

 • More CPU memory allocated freely

 • Modern, state-of-the-art components

 Cyber security

 • Digitally signed firmware updates protected by 

hardware security chip

 • Secure communication protocols: HTTPS, FTPS, OPC UA, MQTT

 • Encrypted communication with engineering system ABB AbilityTM Automation Builder and boot application State-of-the-art features

 • OPC UA for easy connectivity to SCADA systems or operator panels

 • MQTT for lightweight cloud messaging

 • Onboard HTML5 web server technology 

Built-in communication

 • Two Ethernet interfaces for use as switches or  independent ports

 • Onboard Ethernet protocol as Ethernet IP

 • CANopen master interface, CAN2A/2B, J1939

 • KNX and BACnet

 • OPC UA server, OPC DA alarm and event

 • IEC 61850

 • IEC 60870-5-104 Telecontrol

 Reuse & compatibility 

 • Reuse with AC500 platform:- S500/S500-eCo I/O modules – Communication modules

 • Project conversion and code re-use

 Improved engineering and debugging

 • Professional version control with subversion

 • Application project management

 • Object-oriented programming

 • Optimized IEC 61131-3 editors

 • Offline simulation capabilities
February 21, 2025 BY
IN A-B

A-B 2706-LV4R Vacuum Fluorescent Display Human Machine Interface

The 2706-LV4R Message Display Terminal can be installed into the same panel cutout as the DL40. DL20. and DL10 terminals it is designed to replace.

The Allen-Bradley 2706-LV4R is a DL40 Plus message display.

It is a next-generation message display that directly replaces the models in the older Dataliner DL40 / DL20 series.

It has a vacuum fluorescent display (VFD) with adjustable brightness.

It has a four-line configuration with remote I/O and can display up to 20 characters per line*.

It has 128 KB of RAM and a 120 to 240 VAC input power supply.

The 2706-LV4R display supports bi-directional communication with PLCs and SLCs.

For communication, it has an RS-484 port for file transfer and an RS-232 port for uploading and downloading files.

It displays a variety of symbols and characters and can be read from up to 25 feet away*.

Applications developed for the previous DL40/DL20 series are compatible with the DL40 Plus.

It has various features such as embedded variables, message chaining, hidden messages, and data mode selection.

It supports real-time clock and RS-232 message triggering. It provides recovery in case of power failure during message editing.

It has isolated I/O ports and replaceable batteries and supports enhanced point-to-point communication from the message display.

Other enhancements include red, green, or amber message display colors and remote display relay control.

The 2706-LV4R message displays are highly customizable to effectively communicate alarms and messages in industrial environments.

DL40P Series Message Display with 4-line, 20-character VFD and 120 or 240V AC input power and 128K RAM memory.

Menu

Search for products

Back to Top
Product has been added to your cart