ParkeAPPLICATIONS

The CM0711 is a ruggedized CAN controller.

It is primarily used for powertrain control (e.g. powershift transmission), to realize a single function of the vehicle (e.g. auxiliary hydraulic control), or as an additional controller for the system when the existing main controller cannot provide enough I/O for the system.

or as an add-on controller for systems where an existing host controller cannot provide enough I/O for the system.

The CM0711 focuses primarily on high-end output control and closed-loop current control, but can also measure analog and digital input signals.

Multiple modules in a system can be recognized through the addressable IDtag input built into the harness.

The CM0711 comes with a Software Development Kit (SDK) that allows customers to develop their own software.

Features

Input/Output Flexibility

The CM0711 can control proportional valves using either current mode (current closed loop) or PWM mode (voltage open loop) signals.

The module has 7 high voltage side outputs with error detection and 4 low voltage side outputs.

The analog inputs accept a 0-5V signal from an input device or sensor.

The digital inputs can also be configured to measure 2 frequencies or 1 directional frequency (quadrature) input.

The high-side outputs can also be used as digital inputs for switches.

Weatherproof

The rugged aluminum housing is equipped with 2 environmentally sealed 18-pin Deutsch DT14-18 type connectors.

The controller is designed for outdoor environments.