The IC670MDL930 is a relay output module from GE Fanuc’s field control module series. The module features individually isolated channels, specifically six (6) Type A or Normally Open (N.O.) contacts and two (2) Type C Normally Open (N.O) and Normally Closed (N.C.) contact outputs.

Each output contact is rated at 5VDC / 24 VDC / 125 DC or 120 / 240 VAC nominal, with an actual voltage range of 0-130 VDC, 0-265 VAC, 47-63 Hz, and a maximum load current of 16 A per module.The modules are available in a fixed-coil, moving-armature relay type with a maximum current draw of 313 mA.

The module has typical isolation ratings between input-to-logic, user input-to-frame ground, and group-to-group isolation, specifically, 250 VAC continuous, 1500 VAC for 1 minute.

The module has a maximum current rating of 2.0 amps for resistive loads, a voltage range of 5 to 265 VAC; 5.30 amps for 2 to 0 VDC and 31.125 amps for 0 to 2 VDC, and a maximum inrush current of 5 A for 20 ms, with a maximum load current of 10 mA per input The module has a typical response time of 10 ms to ON and OFF signal transitions, and if used with inductive loads, the response time is 10 ms per input. The module’s response time to ON and OFF signal transitions is typically 10 ms, and when used with inductive loads, the maximum switching frequency is 20 cycles per minute per channel.