• Suitable for 3-phase 4-wire, 3-phase 3-wire, single phase 2-wire, and 2-phase 3-wire

systems with voltage 120/240 V and frequency 50/60 Hz

• easYgen-1800 only: Collects and shows 3-phase voltage, current, power

parameter and frequency of generator or mains. Mains/Generator Line voltage (UAB,

UBC, and UCA), Phase voltage (UA, UB, and UC).

• easYgen-800 only: Collects and shows 3-phase voltage, current, power parameter

and frequency of generator. Generator Line voltage (UAB, UBC, and UCA), Phase

voltage (UA, UB, and UC).

• Phase sequence, frequency, Load current IA, IB, IC

• Each phase: Total active power [kW], Total reactive power [kvar], Total apparent

power [kVA], Average power factor PF

• Accumulated Total generator power [kWh], [kvarh], [kVAh], and Earth current

• easYgen-1800 only: For Mains, controller has over and under voltage, over and

under frequency, loss of phase and phase sequence wrong detection functions

• For generator, controller has over and under voltage, over and under frequency, loss

of phase, phase sequence wrong, over and reverse power, over current functions

• 3 fixed analog sensors (temperature, oil pressure and fuel level)

• Flexible sensors can be set as temperature sensor, oil pressure sensor or level sensor

• Precision measure and display parameters about Engine, Temp. (WT) °C/°F both be

displayed Oil pressure (OP) kPa/psi/bar all be displayed Fuel level (FL) %(unit) Speed

(SPD) r/min (unit) Battery Voltage (VB) V (unit) Charger Voltage (VD) V (unit) Hour

count (HC) can accumulate to max. 65535 hours. Start times can accumulate to max. 65535 times