• Phase sequence, frequency, Load current IA, IB, IC

• Each phase: Total active power [kW], Total reactive power [kvar], Total apparent

power [kVA], Average power factor PF

• Accumulated Total generator power [kWh], [kvarh], [kVAh]

• easYgen-1600 only: For Mains, controller has over and under voltage, over and

under frequency, loss of phase and phase sequence wrong detection functions

• For generator, controller has over and under voltage, over and under frequency, loss

of phase, phase sequence wrong, over and reverse power, over current functions

• 3 fixed analog sensors: Engine temperature, oil pressure, and fuel level

• Precision measure and display parameters about Engine, Temp. (WT) °C/°F both be

displayed Oil pressure (OP) kPa/psi/bar all be displayed Fuel level (FL) %(unit) Speed

(SPD) r/min (unit) Battery Voltage (VB) V (unit) Charger Voltage (VD) V (unit) Hour

count (HC) can accumulate to max. 65535 hours. Start times can accumulate to

max. 65535 times

• Protection: automatic start/stop of the genset

• easYgen-1600 only: ATS (Auto Transfer Switch) control with perfect failure

indication and protection function

• All output ports are relay-out