Welcome to the official website of CNIACS Automation Technology Co., Ltd!
0

Archives

Home / Articles posted by cniacs (Page 515)
May 12, 2025 BY
IN Honeywell

Honeywell FC-SAI-1620M Safety High Density Analog Input Module

Built on QMR technology:

Safety Manager™ is based on reliable Quadruple Modular Redundancy (QMR™) diagnostic technology and 2oo4D architecture.

QMR increases system flexibility, enhances diagnostic messaging, and increases system fault tolerance for critical applications.

This technology enables Safety Manager to handle www.cniacs.com multiple system failures to meet the needs of critical control applications.

In addition, Safety Manager is the cornerstone for integrating SIL (Safety Integrity Level) rated sensors and valve actuators in the field.

This ensures effective deployment of safety instrumented functionality for complex and hazardous processes.

Whether it’s integrating SIL1-2 safety transmitters (ST3000 and STT250) or safety valve positioners to enhance safety and field asset management, Safety Manager is the perfect enabler for Safety Instrumented Systems (SIS).

Benefits:

Simplified engineering and design efficiencies – Simplified safety network design

Enhanced system reliability and robustness – utilizes Design for Six Sigma (DFSS) and IEC 61508 standards

Improved process availability – uninterrupted operation during system degradation with QMR technology

Improve O&M performance – unify critical process data and control information for seamless access

Protect investment – facilitate migration from FSC to QMR safety technology

Comply with safety standards – equip industries with SIL3 safety-compliant tools, hardware and software throughout the life cycle of the installation

The IO modules utilize European standard sized instrumentation cards.

The module front panels are 3 HE (3U) high and 4 TE (4 HP) wide. Each IO chassis holds 18 IO modules.

All IO modules have standard 32-pin DIN 41612F connectors.

All IO chassis are equipped with an IO backplane with mating 32-pin connectors and key coding to prevent incorrect insertion of IO modules.

Safety Manager offers a wide range of digital and analog inputs and outputs with different characteristics to meet the needs of a variety of field devices.

Table 12 on the next page lists the available inputs and outputs for the Safety Manager.
May 12, 2025 BY
IN Triconex

Triconex 4351B Tricon Communication Module

Tricon Communication Module

The Tricon Communication Module (TCM) is compatible with Tricon v10.0 and later systems only.

Allows Tricon to communicate via Ethernet with TriStation, other Tricon or Trident controllers, Modbus master and slave devices, and external hosts.

Each TCM contains 4 serial ports, 2 network ports, and 1 debug port (for Triconex).

Each serial port is uniquely addressed and can be configured as a Modbus master or slave.

Serial port #1 supports Modbus or Trimble GPS interface. Serial port #4 supports Modbus or TriStation interface.

Each TCM supports an aggregated data rate of 460.8 Kb/s for all four serial ports.

Tricon programs use variable names as identifiers, while Modbus devices use numeric addresses called aliases.

Therefore, each Tricon variable name must be assigned an alias that will be read by or written to the Modbus device.

An alias is a five-digit number that represents the Modbus message type and the address of the variable in the Ticon. An alias number is assigned in the TriStation.

Any standard Modbus device can communicate with Tricon via TCM, provided an alias is assigned to the Tricon variable.

The alias number must also be used when the host accesses the Tricon through other communication modules.

Each TCM contains two network ports – NET 1 and NET 2. Models 4351A and 4353 have two copper Ethernet (802.3) ports and Models 4352A and 4354 have two fiber optic Ethernet ports.

NET 1 and NET 2 support TCP/IP, Modbus TCP/IP Slave/Master, TSAA, TriStation,

The NET 1 also supports the Peer-to-Peer and Peer-to-Peer Time Synchronization protocols.

A single Tricon system supports up to four TCMs, which must reside in two logical slots.

Different TCM models cannot be mixed in a logical slot.

Each Tricon system supports a total of 32 Modbus masters or slaves, including network and serial ports.

The hot standby feature does not apply to TCMs, but you can replace a defective TCM while the controller is online.
May 12, 2025 BY
IN GE

VMIVME-2510B 64-bit TTL Digital Input/Output (with Built-in Test)

Features:

. Direction of each 8-bit port is individually programmable

.64 mA sink current capability (15 mA source) .

. Separate board address decoding for control and data registers .

. Built-in test logic for fault detection and isolation .

. Highly reliable DIN-type I/O connectors .

. 8-bit, 16-bit, 32-bit transfers

The VMIVME-2510B is a member of the VMIC Megamodule family, which is designed for universal programming.

The subsystem can be configured with consecutive I/O addresses to conserve memory.

These products (VMIVME-1110. VMIVME-2120. VMIVME-2130. and VMIVME-2510B) are designed with two sets of board address switches to provide efficient memory address mapping for CSR and I/O addresses.

The CSR address switches can be configured so that all CSRs on the various boards in the system can be mapped to contiguous memory locations.

Megamodule products are also designed to support 8-bit, 16-bit and 32-bit data transfers.

Specific hardware has been designed into the VMIVME-2510B to support the built-in test functions.

The VMIVME-2510B supports off-line and on-line fault detection and isolation. The front panel Fail LED is used to indicate when a fault exists on this board.

The LED is illuminated at power-up or reset. The LED can be turned off after successfully completing board level diagnostics.

Functional Features

Compatibility VMEbus-compliant dual high-profile I/O connector type: Dual 64-pin connector, DIN 41612

I/O Organization: Eight I/O ports; eight bits wide.

Addressable to any address within the short supervisory or short unprivileged I/O mapping.

Addressing scheme:

Eight ports can be individually addressed on 8-bit or 16-bit boundaries.www.cniacs.com Address DIP switches provide unlimited selection of short data I/O address mappings.

Built-in Tests

Output data can be read back in real-time or off-line mode. Offline mode can be enabled by writing to the Control and Status Register (CSR) to set the test mode bit.

When test mode is enabled, all outputs are tri-stated (TRI-STATE).

Two test mode bits are provided so that each connector I/O (32-bit) can be tested independently if necessary.
May 12, 2025 BY
IN Honeywell

Honeywell 05701-A-0511 5701 Series Control System

Key Features

The 5701 Series Control System is part of the 57 System family and is designed to monitor and control field installed industrial gas detectors.

The key features of the system are as follows.

Provides up to 16 gas detection channels in a standard 19” subrack using a 3U card format.

Provides up to 8 gas detection channels in a 3U card format in a half 19” subrack.

Racks are available for both front and rear wiring.

Simple field connection for wires up to 2.5mm2.

Single channel operation mode for high integrity systems.

Channel control cards are removable and do not www.cniacs.com interfere with other wiring.

Catalytic bridge or 4 – 20mA input.

Optional alarm switching relay output.

Multi-alarm modes for master, zone and voting alarms.

UP, DOWN, STEL and LTEL / RATE alarm outputs.

Update alarms for single or multi-channel alarms.

Remote inhibit and reset inputs.

Relay output on and/or off delay.

Selectable 0 – 20mA or 4 – 20mA isolated monitor outputs.

Easy calibration and operation with dedicated engineering card.

EMC compliant.

Architecture

The system consists of a single 1” (2.54 cm) wide board mounted in a ruggedized rack designed for European style cabinets.

Two rack widths are available:

a. 19-inch with 17 card slots for up to 16 channel control cards and one engineering card.

b. Half 19 inches with 9 card slots for up to 8 channel control cards and 1 engineering card.

Each subrack contains one engineering card and one DC input card to form the rack system.

The system is designed to accommodate different customer wiring configurations, and for this reason, the control functions are separated from the relays and field wiring connections.
May 12, 2025 BY
IN IBA

IBA ibaLink-SM-128V-i-2o VMEbus Interface Card

Introduction

The ibaLink-SM-128V-i-2o VMEbus Interface Card is a multi-purpose, bi-directional interface card designed for use in VMEbus-compatible PLCs and computer systems.

It can be used for both data acquisition and process monitoring as well as for control system applications such as the ibaLogic SoftPLC.

In the following, the board will be named SM128V to simplify the description.

Key features of the SM128V include :

 1 bi-directional fiber optic link with 64A+64D inputs/outputs per link (channel 1)

 1 unidirectional fiber optic link with 64A+64D outputs per link (channel 2)

 Synchronized transmission of all channels on both links at a rate of 1ms

 Address switch for cascading up to 8 SM128V www.cniacs.com interface cards on a link

Channel 1

 Compatible interface for ibaFOB-io, ibaFOB -4i (-S), ibaFOB-4o

 Compatible process i/o interface for ibaPADU-8-IO series and ibaNet750-BM series

 5 V power supply from VMEbus

The SM128V is available for VME32 and VME64 systems. The card requires a 5 V power supply.

The following non-privileged modes of VME access are possible:

 A24 and A32 in the following VMEbus data formats

 D08 (E0)

 D16

 D32

 A40 MD32 (on special request)

The BLT and MBLT modes as well as the auto-configuration and geo-addressing functions are being prepared, but are not available at this time.

The 2eVME mode has not yet been implemented. Access is only allowed in unprivileged data access mode.

The SM128V is a passive board on the VMEbus, i.e., it will not be actively accessed or interacted with on the VMEbus.

The board uses 256 kbytes of address space on the VMEbus.
May 8, 2025 BY
IN Uncategorized

Advantest R3860A RF Component Analyzer

R3860A RF Component Analyzer

R3768/3770 Network Analyzers

Next-generation analyzer family – world’s fastest 5 µs/Point analyzer

Measurement frequency range from 300 kHz to 8 and 20 GHz, depending on model configuration

● World’s fastest 5 µs/point scan rate

2- to 4-port model options available

● System dynamic range of 125 dB (typical)

● Balanced measurements at 20 GHz

Communication services such as cell phones and wireless LANs have increased the use of multiple frequency bands, while at the same time terminals are becoming smaller.

These trends have led to the widespread use of RF modules that combine multiple functions.

In addition, for existing high-frequency components, the ability to perform increasingly complex measurements more efficiently is a critical goal as miniaturization and the wider use of balanced circuits become more widespread.

ADVANTEST has introduced a new generation of analyzers with the flexibility to handle all tasks requiring extremely high accuracy, high speed measurements and superior analysis capabilities.

The R3860A RF Component Analyzer is a new generation of analyzers that provides the flexibility to measure RF modules with a wide range of functions.

Its flexibility covers a wide range of uses from RF modules combining multiple functions to frequency conversion circuits and other active components.

The R3768/3770 network analyzers are high-performance, multi-port analyzers designed with an increased focus on measuring passive components.

Higher frequencies are also supported, with the R3680A*1/3768 supporting frequencies from 300 kHz to 8 GHz and the R3770 supporting frequencies from 300 kHz to 20 GHz.

All models feature software fixturing that enables real-time simulation of virtual matching circuits and normalized impedance conversion in addition to S-parameter analysis.

With the world’s fastest high-speed scanning speed of 5 µs/point, even complex analysis simulations can be completed immediately.

In addition, the multiport models enable software balance simulation and balance parameter analysis.

When used in conjunction with the flexible multi-window and multi-trace capabilities, these models also allow for instant measurement of complex analytical projects.

The large, high-visibility display is a key factor in improving analysis efficiency, as it simultaneously displays multi-port paths in addition to fixture simulation traces.
May 8, 2025 BY
IN ABB

ABB OCAH 940181103 High Performance Processor Unit

The OCAH 940181103 is a high-performance processor unit designed for the System 800xA distributed control system.

The OCAH 940181103 processor unit has the following key features:

High performance: Equipped with a powerful multi-core processor and a large amount of memory, it can handle multiple tasks together and process large amounts of data quickly to meet the needs of various industrial control applications.

High reliability: The processor has built-in redundancy to ensure high system availability and reliability even in the case of hardware defects.

Communication talent: Supporting various communication protocols such as Ethernet, Profibus and Modbus, it is convenient to communicate with various I/O modules and other device interfaces.

Diagnostics and Defect Cleanup: The processor unit features advanced diagnostics and defect cleanup functions, including comprehensive work logging

and a built-in Web server for remote access and monitoring, helping to quickly identify and address potential problems.
May 8, 2025 BY
IN Emerson

Emerson DeltaV™ Bulk Power Supplies

Advantages

. Easy to use, DeltaV High Capacity Power Supplies provide reliable 12 V and 24 VDC power for DeltaV system power supplies and bus field power supplies.

They are easily mounted to T-shaped DIN rails!

. Increased availability. Redundant modules based on active MOSFET technology offer higher efficiency and lower voltage drop than conventional diode modules.

This results in less heat dissipation and higher system reliability.

Flexible and cost-effective. Flexible and cost-effective DeltaV Bulk power supplies are flexible and cost-effective because external redundant modules can be used, such as when load sharing is required.

Models are available with and without conformal coating.

. Small footprint.DeltaV Bulk Power Supplies www.cniacs.com take up little space and are highly competitive!

Hardware Specifications

General Environmental Specifications

Operating temperature -40 to +70°C (-40 to 158°F), linearly derated to 75% power at 60 to 70°C

Storage temperature -40 to +85°C (-40 to 185°F)

Relative humidity 5 to 95%, non-condensing

Protection rating IP20

Air Pollutant ISA-S71.04-1985 Air Pollutant Class G3. Conformal Coating

Shock 10(g) RMS, triaxial, 11ms per axis

Vibration 2.5(g) RMS, 10-2000 Hz (random); 3 axes, 20 minutes per axis – IEC 60068-2-6

Mounting Mount only on a horizontal DIN rail with the right side of the label text facing up.
May 8, 2025 BY
IN ABB

ABB Contrac Precise Continuous Control of Water Injection Control Valves for Steam Boilers with Superheaters

Contrac – Electric Actuators

Introduction

The water injection valve on a steam boiler controls the amount of cooling water injected into the superheated steam in the superheater and reheater.

The amount of water injected is decisive for the temperature of the steam inside and at the output of the superheater.

Too much water injection can lead to excessive cooling of the steam, which negatively affects efficiency.

On the other hand, insufficient water injection leads to excessive steam temperature and pressure.

The risk of damage to the superheater, turbine and downstream components increases as a result.

For optimal operation of the superheater at the lowest possible steam temperature and the highest possible hot steam temperature, the

continuous and precise mass flow control of the injected cooling water is first required.

Depending on the operating conditions, this requirement means that very small amounts of water need to be supplied, thus requiring highly accurate positioning in disproportionate areas of the valve.

The operating environment is extremely harsh.

In addition, the ambient temperature in the superheater area can be very high.
May 8, 2025 BY
IN ABB

ABB’s Measurement and Analytics portfolio

Measurement made easy

To run any process efficiently, measurement, execution, recording and control are essential,

Record and control. By choosing ABB, you are choosing a partner that can provide the best measurement and analysis solutions for your needs.

thereby maximizing the return on your investment. When you invest in ABB’s measurement and analysis solutions, you get the best technology, reliability and service in the industry.

R&D is a key source of ABB’s technological leadership.

ABB is constantly developing new applications based on existing technologies and continues to develop the breakthrough technologies needed to meet the challenges of the future.

ABB is constantly developing new applications based on existing technologies and continues to develop the breakthrough technologies needed to meet the challenges of the future.

Comprehensive measurement solutions Tailored to each industry

ABB’s measurement and analytics products provide world-class measurement solutions for any industry, utility or municipality. Latest

Innovations provide technical solutions that make running your plant easier.

ABB’s measurement and analysis products are based on universal technology, offering a common look and feel and method of operation. As a result, products are easy to configure, easy to integrate and easy to maintain.

ABB’s measurement and analysis portfolio

– Analytical Measurement

– Flow measurement

– Pressure measurement

– Temperature measurement

– Level measurement

– Actuators and Positioners

– Recorders and Controllers

– Device Management, Fieldbus and Wireless

– Force Measurement

– Services

Menu

Search for products

Back to Top
Product has been added to your cart