VOLTAGE ADJUST CONTROL

a. An internal VOLT screwdriver adjust provides adjustment of the generator output voltage.

Clockwise rotation of this control will increase the generator output voltage.

b. The voltage regulator is shipped from the factory with a jumper connected across terminals 6

and 7. If a remote voltage adjust rheostat (R50) is used (supplied loose), the jumper across

these terminals should be removed and the remote voltage adjust rheostat should be connected

to these terminals. The wiper of the rheostat must be connected to the rheostat terminal which

connects to terminal 6 of the voltage regulator and the other terminals are connected as shown in

the interconnection diagram.

c. When the remote voltage adjust rheostat is adjusted to its maximum resistance (fully counter

clockwise), the minimum generator output voltage will be obtained. Also, when the remote

voltage adjust rheostat is use, the front panel VOLT control will operate as a voltage range adjust

control.