The EL2044 digital output terminal connects the binary 24 V DC

control signals from the automation device on to the actuators at

the process level with electrical isolation. The EtherCAT Terminal

contains four channels that indicate its signal state by means of

light emitting diodes. The integrated diagnostics can be evaluated

in the controller and is indicated by the LEDs. Maintenance of the

application is simplified by the diagnostics. The power contacts are

connected through. The reference potential of the outputs is the

0 V DC power contact. The outputs are supplied via the 24 V DC

power contact.

Special features:

• connection of different load types possible (ohmic, inductive, lamp

load up to 24 W)

• max. output current 2 A per channel

• overload and short-circuit proof outputs and reverse polarity protection

• integrated diagnostics option, including

• short-circuit detection per channel

• line break detection per channel

• overcurrent per channel

• overtemperature

• voltage loss and undervoltage

• parameterizable output behavior in case of bus error (safe state)