The EL3702-0015 analog input terminal handles signals in the

range between -150 and +150 mV and is thus ideally suited

for the measurement of shunts and Rogowski coils with built-in

integrator. The voltage is digitized to a resolution of 16 bits,

and is transmitted, electrically isolated, to the controller.

The signals are oversampled with an adjustable, integer multiple

(oversampling factor: n) of the bus cycle time (n microcycles per

bus cycle). For each microcycle, the EtherCAT Terminal generates

a process data block that is transferred collectively during the next

bus cycle. The time base of the terminal can be synchronized

precisely with other EtherCAT devices via distributed clocks.

This procedure enables the temporal resolution of the analog input

signals to be increased to n times the bus cycle time.

In conjunction with the EL47xx (analog output terminal with

oversampling), responses with equidistant time intervals, e.g. in the

event of a threshold value being exceeded, become possible.

The distributed clocks function enables several EL3702-0015 devices

to be synchronized in almost any configuration.

The maximum sampling rate per channel is 100 ksamples/s (100.000

samples/s).