Category: DEIF

Application

The Generator Protection Unit (GPU-3 Hydro) is a compact microprocessor-based 

protection unit containing all necessary functions for protection of a hydro turbine

driven synchronous/asynchronous generator. It contains all necessary

galvanically separated 3-phase measuring circuits.

The GPU-3 Hydro is well-suited for PLC-controlled systems, and the interfacing can

be done via digital and analogue I/Os or via serial communication.

Display unit

The display unit is separate and can be installed directly on the main unit or in the

front of the switchboard door (3 m display cable included). Up to two additional

displays can be installed within 200 m. The display unit shows all measured and

calculated values as well as alarms and data from the event log.

Self-test

The GPU-3 Hydro automatically carries out a cyclical self-test at start-up.

If any errors are found, they will be displayed in clear text in the display and 

indicated with a relay output (status output).

M-Logic (Micro PLC)

This configuration tool is part of the PC utility software which is free of charge.

With this tool, it is possible to customise the application to your needs.

It is possible to dedicate specific functions or logical conditions to different inputs and outputs.

Easy to operate and configure, DEIF’s Generator protection unit (GPU-3 hydro)

is an ideal controller for PLC-based hydro power systems.

The GPU-3 hydro offers comprehensive generator protection and synchronisation.

Serial communication enables easy interfacing with PLCs, SCADA systems and more,

and the unit features all necessary 3-phase measuring circuits and displays all

values and alarms on a quality LCD screen.

For start/stop and protection functionalities, add the GPU-3 hydro turbine control option,

a turbine interface card with separate power supply and independent microprocessor.

In cases of GPU-3 hydro main processor failure, the engine interface card will activate

its back- p mode to ensure uninterrupted turbine supervision and automatic turbine

shutdown in case of shutdown alarm.

With free software download and upgrade at www.deif. com, it is possible to customise

the application to suit your needs exactly: dedicate specific functions or logic conditions

to different inputs and outputs and tune all sequences according to your requirements.

Features

• Generator/busbar protection

• Synchronisation

• Multiple display units and operator panels possible

• Turbine protection with back-up on shut-down channels

• Turbine control and communication

Advanced communication features for system integration

MVR-200 relays are available with various communication standards like

IEC 60870-101/103/104 or IEC 61850 Ed. 2 which allow seamless into

your power management system.

Increase your system safety with Arc-flash protection

Arc-flash protection can be integrated into all MVR-200 relays with available hardware slots.

A variety of point and pressure sensors is available to reach perfect coverage of the

switchgear to clear any arc-flash before it causes any damage.

Features

• Programmable logic

• Fast and easy commissioning and service with front communication port and intuitive software

• Password-protected user levels

• Individual voltage and current harmonics up to 31st

• Redundant Ethernet with Modbus TCP

• RS-485 Modbus RTU communication

• IEC 60870-5-104/103/101 communication

• IEC 61850 communication (incl. HSR, PRP, PTP acc. IEEE 1588) and GOOSE

• On-site replaceable spare part modules

• Class 0.5 power and energy measurement (Class 0.2S optional)

• Conformal Coating available for all devices

• Marine type approval by major class societies

The MVR-200 series combines reliable protection, control and measuring

functionality in a single device for medium and high voltage applications.

The MVR-200 series offers reliable protection with powerful complementary

monitoring, measuring, communication and diagnostics functionality.

Comprehensive set of protection functions

The MVR-200 line of protection relays provides a comprehensive set of a total

of 16 different relays for your power management system.

With its flexible hardware design, it is easy to adjust the configuration to your specific needs.

Reliable hardware suitable for marine and land-based applications

MVR-200 relays come with marine approvals from all major classes.

Also land-based applications will benefit from the tested hardware which

will demonstrate utmost reliability required in e.g. critical power applications.

Advanced communication features for system integration

MVR-200 relays are available with various communication standards like

IEC 60870-101/103/104 or IEC 61850 Ed. 2 which allow seamless into

your power management system.

Increase your system safety with Arc-flash protection

Arc-flash protection can be integrated into all MVR-200 relays with available hardware slots.

A variety of point and pressure sensors is available to reach perfect coverage of the

switchgear to clear any arc-flash before it causes any damage.

DEIF’s differential current relay RMC-131D protects the generator against

short circuits and leakage currents in the windings of the generator.

The relay compares the differential current of each of the three phases,

providing an RMS measurement at sinusoidal currents.

In order to obtain a short response time on a fault condition,

the measurement is based on peak values.

The versatile units feature a number of adjustable parameters.

RMC-131D is part of DEIF’s complete range of relays for protection and

control of generators.

Variants

RMC-111D

Short circuit

I>>: 100 to 400 %. <50 mS response time

RMC-121D

Short circuit

I>>: 100 to 400 %. 2 sets of contacts (parallel)

RMC-122D

Short circuit and over-current

I>>: 100 to 400 %, I>: 50 to 150 %

Combined functionality

RMC-131D

Differential current

I>>: 100 to 400 %. 2 sets of contacts (parallel).

Features

• Differential current relay

• ANSI code 87

• Measurement of 3-phase currents

• Non-stabilised measurement

• LED indication of fault condition

• Timer-controlled tripping

• LED indication for activated relay

• Extra change-over relay contact for signalling

• 35 mm DIN rail or base mounting

The MDR-2 is a state-of-the-art combined differential protection and

short-circuit protection relay for generator protection against internal

short circuits (leaking currents).

Even in cases of fail tripping, the MDR-2 offers an adjustable tripping

characteristic function that compensates for unbalanced current

measurements, avoiding fail trippings altogether.

The MDR-2 gives you direct access to all settiangs and a chronological log

of up to 150 historical events/alarms. The unit’s integrated LCD screen displays

all measured and calculated values, eliminating the need for additional meters

or wiring, and facilitates fault-finding in connection with commissioning

identifying fault locations.

Available options include a block (generator + step-up transformer) protection

option and a short-circuit and over-current protection option.

Features

• Short response time (70 ms)

• 3-phase current detection on both generator sides

• Active adjustment of non-balanced current measurements

• Measuring accuracy 1 %

• Display indicator for all measurements

• DIN rail or base mounting with remote mountable display

Flexible blackout prevention options

Designed for flexibility and efficient blackout prevention, the AGC 150 ATS includes an

Overlap feature that prevents blackouts during source switching by keeping the breakers

of both sources closed for a user-defined period and enabling short-time paralleling.

You can prioritise sources using parameters or digital inputs, offline or online, and you

can prioritise one of the connected sources, let the controller prioritise a source randomly,

or prioritise both in a three-breaker setup.

Two or three breakers supported

The AGC 150 ATS can control two or three breakers, allowing you to open and close a bus

tie breaker between the two power sources if needed. The controller can therefore be

configured for use in virtually any ATS application, anywhere in the world, including

the use of two sources simultaneously.

Easy setup and operation

You can easily configure the AGC 150 ATS for your application by adjusting its built-in

parameters or by using the M-Logic feature in DEIF’s free USW-3 utility software.

The sunlight readable LCD provides easy setup and quick access to important information.

On-screen text can be displayed in 8 languages, and the illuminated buttons smoothly

guide the operator and make the controller very easy and intuitive to operate.

Streamline power transfer with DEIF’s AGC 150 ATS controller

Ideal for emergency power applications with any power source, the AGC 150 ATS

is a robust, flexible, and user-friendly ATS controller that can operate up to three breakers.

The AGC 150 ATS is a dedicated automatic transfer switch (ATS) controller capable

of handling any type of power source. Its flexible setup options let you use it in a

wide range of emergency power solutions by controlling up to three breakers.

The IP65 certified front-mounted controller is easy to install, set up, and use.

Any power source in Source-Source mode

In addition to Generator-Mains mode (operating the ATS to switch between a mains

incomer and a genset), the AGC 150 ATS can operate in Source-Source mode,

accepting any kind of power source (for example two mains incomers, or a combination

of mains or a genset with a battery energy storage system or a renewable power source).

The controller can send start and stop signals to both sources.

Many operating options

The AGC 150 ATS uses automatic mains failure (AMF) logic and control signals defined

by the controller’s input/output settings to operate the ATS. For example, it can monitor

a mains source for voltage, frequency, and voltage anomalies, switching to the secondary

source in case of issues (after sending a start signal and checking that the voltage from

the secondary source is within the defined limits, if needed).

Easy setup and operation

You can easily configure the AGC 150 ATS for your application by adjusting its built-in

parameters or by using the M-Logic feature in DEIF’s free USW-3 utility software.

The sunlight readable LCD provides easy setup and quick access to important information.

On-screen text can be displayed in 8 languages, and the illuminated buttons smoothly

guide the operator and make the controller very easy and intuitive to operate.

AGC 150 ATS: Advanced Generator Transfer Switch for Seamless Power Management

The AGC 150 ATS is an advanced generator transfer switch controller that ensures seamless

power transfer between multiple sources. Whether you are switching between mains and

genset, or integrating renewable energy sources, the AGC 150 ATS provides reliable and

efficient control. Its automatic mains failure (AMF) logic and flexible setup options make

it ideal for emergency power solutions. With features like blackout prevention through the

Overlap function and support for up to three breakers, this controller is designed to meet

the needs of any power management system. Easy installation and operation, combined

with multilingual support and a sunlight-readable LCD, make the AGC 150 ATS a top choice

for OEMs and system designer.

Flexible blackout prevention options

Designed for flexibility and efficient blackout prevention, the AGC 150 ATS includes an

Overlap feature that prevents blackouts during source switching by keeping the breakers

of both sources closed for a user-defined period and enabling short-time paralleling.

You can prioritise sources using parameters or digital inputs, offline or online, and you

can prioritise one of the connected sources, let the controller prioritise a source randomly,

or prioritise both in a three-breaker setup.

Two or three breakers supported

The AGC 150 ATS can control two or three breakers, allowing you to open and close a bus

tie breaker between the two power sources if needed. The controller can therefore be

configured for use in virtually any ATS application, anywhere in the world, including

the use of two sources simultaneously.

Easy setup and operation

You can easily configure the AGC 150 ATS for your application by adjusting its built-in

parameters or by using the M-Logic feature in DEIF’s free USW-3 utility software.

The sunlight readable LCD provides easy setup and quick access to important information.

On-screen text can be displayed in 8 languages, and the illuminated buttons smoothly

guide the operator and make the controller very easy and intuitive to operate.