Category: Emerson

Benefits

Completely Managed by DeltaV. Power up the switch and it is

automatically discovered by the DeltaV switch commissioning

application in the Network Device Command Center (formerly

the Smart Switch Command Center). The network address

is automatically assigned by DeltaV DCS or by the user when

installed in the DeltaV 2.5 network (new in DeltaV v13.3).

Just provide a switch name, description, and select a few setup

parameters and the switch begins reporting. No more serial

connections are required to configure switches.

Network alerts and diagnostics automatically reported

to DeltaV workstations. Operators and maintenance

stations will automatically receive device alerts indicating

network communications irregularities. The DeltaV

Network Device Command Center application provides

the interface to diagnose and troubleshoot network problems.

All built-in without the need for third party applications for

network monitoring.

Introduction

The DeltaV™ Network “Smart” switches are the next generation

in the use of commercial off-the-shelf (COTS) components

in control systems. Called “purpose-built” commercial

components, these switches combine the lower cost of off-the

shelf components with DeltaV specific software and features

to make them more integrated and plug-and-play in the

DeltaV Area Control Network (ACN) and other DeltaV networks

external to the ACN.

DeltaV Smart Switches require no configuration to function in

the DeltaV networks. Accessing the advanced features takes

only minor configuration that is easy to perform using the

DeltaV Network Device Command Center and secured so you

can’t incorrectly configure any switching functions that impact

the performance of the DeltaV system.

This purpose-built switch allows the DeltaV system to provide

an auto port lockdown advanced security feature that is easy for

a control system user to implement: an increasingly important

product feature in today’s hostile environment.

•  Completely managed by DeltaV systems

•  Network alerts and diagnostics automatically

reported to DeltaV workstations

•  Can be installed on the network between the

DeltaV workstations and the Emerson Smart

Firewall (DeltaV 2.5 network)

•  Plug-and-play installation

•  Auto security lockdown

•  A full line of Industrial Rated Fanless Switches

•  Fully supported by Emerson

DeltaV Smart Switches require no configuration to function in

the DeltaV networks. Accessing the advanced features takes

only minor configuration that is easy to perform using the

DeltaV Network Device Command Center and secured so you

can’t incorrectly configure any switching functions that impact

the performance of the DeltaV system.

This purpose-built switch allows the DeltaV system to provide

an auto port lockdown advanced security feature that is easy for

a control system user to implement: an increasingly important

product feature in today’s hostile environment.

Accessing the Console.

Secure Shell (SSH) and serial connections are provided using a USB-C cable (except for the RM2040).

The Advanced Configuration menu includes a handful of settings that allow you to customise

the switch for your specific use case while conforming to the requirements of the DeltaV Regional Control Network.

SSH communications provide a secure connection to the switch console.

Encryption in SSH communications provides additional security for switch operation

and maintenance by protecting user credentials and preventing interception.

Full range of switch hardware configurations.

The new generation of DeltaV network switches offers a wide range of hardware solutions.

From 30-port rackmount units to ffxed-port DIN-rail switches,

DeltaV network switches meet a wide range of network requirements.

The extensive line of DeltaV Smart Switches is all you need to implement a complete DeltaV control network.

Emerson provides full support. As an Emerson product,

these DeltaV network switches are fully supported by Emerson when used in a DeltaV network.

Fully supported by Emerson.

As Emerson products,

these DeltaV Network Switches are completely supported

by Emerson when used within the DeltaV network.

You receive full technical support from our Global Service

Center, warranty support, product support, and education —

all from Emerson.

Plug and Play Installation.

The new generation of DeltaV Smart Switches feature a

DeltaV-compatible setup that installs out of the box into a compatible DeltaV network.

They require no user configuration to fully support DeltaV network communications.

NDCC ensures that the configuration of all Smart Switches on the network remains consistent,

so you never have to worry about misconfigurations affecting network performance.

Plug and Play requires that any existing switch or network device be configured for 100/1000 full-duplex communication or auto-negotiation.

Auto-lock prevents unauthorised network connections.

Disabling unused network connections is a security “best practice” that helps you comply with factory security policies.

With the switch’s built-in one-click lockout feature, you simply click a button in the DeltaV Network Appliance Command Centre application to

to automatically lock all unused network ports on your system. Easily protect your network from intrusion.

The port locking algorithm has been enhanced to allow locking of multiple daisy-chained DeltaV nodes,

as well as detection of new nodes within dynamically determined uplink ports.

You can also configure the switch to ignore lockdown commands on specific switch ports if the application requires it.

For example, a port connected to a virtualised host server to allow DeltaV VMs to move between hosts.

Improved performance.

The switching ASICs used in these new products offer new capabilities

such as increased network buffers, the ability to process/forward/filter packets

based on more L2 address information such as IP addresses, UDP or TCP ports, and a non-blocking

architecture.

and non-blocking architecture, in addition to more powerful CPUs for control plane and management

operations.

Plug and Play Installation.

The new generation of DeltaV Smart Switches feature a

DeltaV-compatible setup that installs out of the box into a compatible DeltaV network.

They require no user configuration to fully support DeltaV network communications.

NDCC ensures that the configuration of all Smart Switches on the network remains consistent,

so you never have to worry about misconfigurations affecting network performance.

Plug and Play requires that any existing switch or network device be configured for 100/1000 full-duplex

communication or auto-negotiation.

Removal and Insertion

This unit cannot be removed or inserted with system

power energized.

Power must be de-energized before disconnecting

any carriers or LocalBus Extender cables.

This product must not be unplugged unless either

the system has been de-energized or the area is

known to be safe. No combination of I/O carriers and

LocalBus Extenders must exceed a length of 6.5

meters. Interconnecting cable between enclosures

must be in conduit.

Maintenance and Adjustment

This unit contains no user serviceable parts and

should not be disassembled for any reason.

Calibration is not required.

BoarD SIzE

Height:  233.4 mm (9.2 in.)

Depth:  160.0 mm (6.3 in.)

Front Panel Height:  261.8 mm (10.3 in.)

Width:  19.8 mm (0.8 in.)

ElECTroMagnETIC CoMPaTIBIlITy (EMC)

Intended for use in systems meeting the following

regulations:

U.S.: FCC Part 15. Subpart B, Class B c

Canada: ICES-003. Class B c

This product was tested in a representative system to

the following standards:

CE Mark per European EMC Directive 89/336/EEC  c

with Amendments; Emissions: EN55022 Class B;

Immunity: EN55024

SaFETy

All printed wiring boards (PWBs) are manufactured with

a flammability rating of 94V-0 by UL recognized manufacturers.

Specifications

ForM FaCTor

Single-slot 6U VMEbus format

PCI-To-PCI InTErFaCE

Controller:  PLX6150 PCI-to-PCI interface bridge

Address/Data:  A32/D32

PCI Bus Clock:  33 MHz

Signaling:  5V

Mating Connector on Host Board:  114-pin PCI

Expansion Connector; still allows use of host CPU’s

original PMCs

Compliance:  PCI Local Bus Specification, Revision 2.1

IEEE P1386.1 PCI MEzzanInE CarD SloTS

Address/Data:  A32/D32. PMC PN1. PN2. PN4

connectors

PCI Bus Clock:  33 MHz

Signaling:  5V

Power:  +3.3V, +5V, ±12V, 7.5 watts max. per PMC

Module Types:  Two single-wide or one double-

wide, front- panel or P2 I/O

P2 PMC I/O:  64 I/O signals from first PMC routed

to VMEbus P2 connector

PowEr rEquIrEMEnTS (no PMCS InSTallED)

Power:    +5V @ 0.44 ampere (max.)

+12V @ 0 ampere (max.)

–12V @ 0 ampere (max.)

PMCspan Details

CarrIEr BoarDS

Emerson offers a full line of PowerPC® microprocessor

based VME products which can be custom configured

for specific applications via on-board PMC slots. The

PMCspan expands this capability to further increase

customizing alternatives. It is compatible with Emerson’s

PowerPlus VME series. For further information on

these host CPUs, contact your local sales representative.

ProDuCT oFFErIng

In order to support the increased PCI bus loading

associated with additional PMCs, PMCspan uses the

PLX6150. This PCI-to-PCI interface bridge supports a

32-bit primary bus interface and a 32-bit secondary

bus interface. PMCspan mates directly with the host

CPU via the separate PCI expansion connector.

When the maximum of two PMCspan modules are stacked

together, the top board does not require a second PCI

to-PCI interface bridge. Software views this secondary

module as an extension to the primary PMCspan.