Category: Emerson

Control Execution 

Like the Ovation OCR1100 controller, the OCR3000 performs complex modulation,

discrete and sequential control strategies, as well as data acquisition and monitoring functions.

The OCR3000 controller can generate up to 64,000 points. 

With a quad-core processor, the OCR3000 controller supports up to five control tasks with loop speeds ranging from 10 milliseconds to 300 seconds.

Each control task consists of an I/O flow point input scan, a control scheme execution, and an output scan.

The loop speed for all five control tasks is user selectable.

Each of the five control tasks can range from 10 milliseconds to 300 seconds.

Connectivity 

The OCR3000 includes an embedded Ethernet link protocol driver for connecting to intelligent electronic devices

(IEDs) and other third-party devices with embedded controllers, such as smart inverters and other devices.

The OCR3000 includes embedded Ethernet link protocol drivers to communicate with intelligent electronic devices (IEDs)

and other third-party devices with embedded controllers, such as smart inverters,

weather stations, relay protection systems, or motor control centers.

The Scalable Controller performs data acquisition functions by using on-board communication protocol drivers to communicate

with Ethernet-enabled I/O systems from a wide range of vendors, as well as various types of PLCs, PACs, and RTACs.

Process Applications

The OCR3000 controller is designed to meet the demanding requirements of a wide range of process applications, including :

Continuous PID (Proportional-Integral-Derivative) control 

Sequential function chart control 

Boolean logic 

Advanced Control 

Model predictive control 

Fuzzy logic 

Neural Networks  

Special Logic and Timing Functions 

Data Acquisition 

Event Sequence Processing 

Process point sensor/limit checking 

Process point alarm handling 

Process point conversion to engineering units 

Process point database storage 

Local and remote I/O interfaces 

Process point labeling

DeltaV System Overview

This chapter gives an overview of the DeltaV digital automation system. It takes a

brief look at the hardware, describes the basic concepts and terminology, introduces

the major software components, and ends with a summary of the ways you can find

out more about the DeltaV system from the Help and Books Online.

Hardware

The manual, Installing Your DeltaV Digital Automation System, also available as an online

book, describes the DeltaV system hardware and provides instructions for installing

and powering up the system.

The I/O subsystem also supports Serial interface cards as well as the Ethernet I/O interface.

These various I/O products provide a wide range of interfaces to meet the needs of your control application.

The SD Plus also supports CHARMS and WirelessHART IO cards.

The CHARMS I/O card (CIOC) connects via the redundant Ethernet

ports of the controller and provide a highly distributed and flexible I/O solution called Electronic Marshalling.

Up to 16 CIOC’s can communicate with one controller, each providing up to 96 individually configurable signal types.

The WirelessHART I/O card provides redundant communication for up to 100 WirelessHART devices,

providing high availability and reliability of wireless data.

Up to 16 Wireless HART I/O cards can communicate to a single controller.

Control modules are automatically scheduled by the controller, based on their assigned scan rates.

This allows each control function to be optimized based on the process dynamics.

Modules scan times can be set as fast as 100 ms, and as slow as 60 seconds.

The number of control modules that can be assigned to a controller depends

on the complexity and scan rate of each module, and the available CPU and memory.

Product Description

The SD Plus controller executes control logic based on the process signals derived

from the I/O subsystem and provides communication to the rest of

the DeltaV control system for operator interaction and data collection.

Each controller node can be installed as a simplex or redundant node.

Redundancy is provided by adding a second controller and power supply

mounted adjacent to the primary controller.

The controllers are connected to the I/O carriers, which are mounted to the right of the controller carriers.

Up to 8 carriers with 8 cards each can be connected to the local bus I/O, for a total of 64 traditional I/O

cards.

In addition to the 8 local I/O carriers, each controller can communicate

with an additional 16 Remote I/O units hosting traditional card based I/O.

In addition to traditional I/O cards, the local bus supports field bus technologies,

including Foundation fieldbus, Profibus DP, DeviceNet and AS-I protocols.

 Scalable controllers

 Quick Assembly

 Easy to use

 Field Proven architecture

 Designed for Digital Marshalling

 Advanced Controls

Introduction

The DeltaV S-Series controllers provide communication and control functions and integrate

field devices and the other nodes on the control network.

The SX and SD Plus controllers provide a choice to match the controller capacity to the requirements of the process.

They also provide new ease of use features that eliminate mounting screws and accelerate cabinet assembly.

Control strategies and system configurations created on earlier DeltaV systems can be used with this controller.

The SD Plus Controller provides all the features and functions of the M-Series controllers with the added support for CHARM based Digital Marshalling.

The control languages executed in the controllers are described in the Control Software product data sheet

Benefits

Non-Intrusive DeltaV I/O simulation. Use the VIM2 in conjunction with the

MYNAH Technologies’ MiMiC Simulation Software to simulate your DeltaV M-Series I/O and digital bus field devices.

 Supports DeltaV I/O modules. Provides completely non-intrusive simulation of all DeltaV M-series I/O Modules.

Supports autosensing of I/O and accurate testing of controller loading.

DeltaV configuration can be fully tested without modifying the control strategies.

 Digital bus support. Provides simulation of all DeltaV Digital Busses and Foundation Fieldbus function blocks.

Supports Foundation Fieldbus control in the field configuration testing.

 Powerful simulation solution. Provides full simulation of up to 64 DeltaV I/O modules per controller.

Simulation execution is fast and efficient; the DeltaV controller thinks it’s talking with real IO.

Introduction

The DeltaV M-series Virtual I/O Module 2 (VIM2) provides nonintrusive simulation of the

DeltaV M-series I/O Cards and digital bus field devices for process simulation

when used with MYNAH Technologies’ MiMiC Simulation Software.

DeltaV Control strategies and system configurations can be fully tested with this powerful simulation interface.

The VIM2 also provides an interface to Ethernet I/O networks and devices that

use the Modbus TCP/IP or Ethernet/IP protocol drivers.

DeltaV M-series controllers can read and write signals from plant floor devices connected

to Ethernet I/O networks such as PLC’s, Motor Control Centers, and Weigh Scales.

Powerful integration solution. Use the VIM2 in conjunction with the MYNAH

Ethernet I/O drivers to integrate your DeltaV system with your Ethernet I/O device networks.

 Large device capacity. Each VIM emulates four DeltaV Serial Cards and support up

to 128 Serial Card Datasets of information from 32 network devices in simplex installations and 16 devices in redundant installations.

Communication over the Ethernet I/O device network is fast and efficient.

 Flexible networking. User configurable IP addressing allows the VIM2 to be used in almost any

plant environment regardless of networking scheme.

Introduction

The MD Plus Controller provides communication and control between the field devices and the other nodes on the control network.

Control strategies and system configurations created on earlier DeltaV™ systems can be used with this powerful controller.

The MD Plus Controller provides all the features and functions of the M5 Plus Controller,

with plenty of memory for large batch and other memory-intensive applications.

The control languages executed in the controllers are described in the Configuration Software Suite product data sheet.

Benefits

Increases productivity

Faster. The MD Plus Controller is more than 400% faster than the M5 Plus Controller and over

3X the user configurable memory as the MD controller. The Ethernet ports are full duplex, 100MB/second maximum throughput.

The results are lower CPU utilization and higher capacity for control strategies.

Self-addressing. The DeltaV controller is unique in its ability to automatically identify itself to the DeltaV control network.

When the controller is powered up, it is automatically assigned a unique address—no dip switches, no configuring—just plug and play!

Self-locating. A controller’s physical location is easy to find. LEDs on the face of the controller can be made to flash, providing a strong visual clue.

Automatic I/O detection. The controller can identify all I/O interface channels located on the subsystem.

As soon as an I/O interface is plugged in, the controller knows the general characteristics of the field devices managed by that I/O interface.

This reduces the no value engineering associated with configuration — easy!

Direct GPU transfer

 • Sample programs for AMD DirectGMA and NVIDIA (CUDA) available.

 • Direct GPU transfer eliminates unnecessary system memory copies, lowers CPU overhead, and reduces latency, resulting in 

significant performance improvements in data transfer times for applications.

 • Direct capture of image data to GPU memory is available using AMD’s DirectGMA. Compatible with AMD FirePro W5x00 and 

above and all AMD FirePro S series products.

 General purpose I/O lines

 • Compatible with a wide range of sensors and motion encoders.

 • High-speed differential inputs: Quadrature motion encoder support up to 5 MHz.

 • Isolated current-sense inputs: 5V, 12V, 24V signaling voltages accepted, up to 50 kHz, individual galvanic isolation up to 

250VDC and 170VAC RMS.

 • Isolated contact outputs.

 • High-speed 5V-compliant TTL inputs/ LVTTL outputs.