Category: Honeywell

OVERVIEW

PUC I/O extension modules are part of the Honeywell PUC Series

programmable unitary controller which supports Ethernet BACNet

IP communication. Two types of I/O modules extend the functions

of the controller and meet the need of more I/O points.

The hardware design of the controller integrates with the elements

of Honeywell’s user experience, which embodies the essence of 

people oriented concept no matter from appearance or usage.

I/O extension modules, integrated with the controller, is programmable

by using the same programming tools and can be widely used to

control different building equipment.

FEATURES

• Work with PUC controller to monitor more equipment

• Fully programmable on the PUC controller via programming tools

to meet different HAVC applications

• Enable I/O modules to be connected to the controller by RS-485 Bus

• Up to 2 extension modules can be connected to a single controller

• Elegant design, light weight and easy to operate, which continues 

Honeywell’s style on the unitary controller

• Color-coded removable terminal blocks for differentiating signal

types enable convenient and fault free termination

• Built-in input/output ports allowing extension module through

RS-485 port to enrich point combination

• Support the connection of points among controllers, namely “binding”,

to make invocation more convenient

• Additional network security with advanced security encryption standard

• Embedded programmable tool under niagara platform with user friendly

interface, compatibly use the programs edited by the existing WEBs tools

• CE, UL and RoHS certification

Overview

The Honeywell PUC Series PUC8445 Programmable

Unitary Controller supports Ethernet BACnet IP

communication, which provides a rapid response

for downloading and updating data. The controller

supports numerous network topologies, and offers

flexible networking and wiring solutions.

The hardware design of the controller incorporates

elements of Honeywell’s user experience and reflects

a people-oriented focus in all aspects of both

appearance and usage. The controller is programmable

and can be used in a variety of scenarios to control a

diverse range of building equipment.

Features

• Supports Ethernet BACnet IP communication

• Fully programmable to meet a variety of HVAC applications

• Rapid response for downloading and updating data

• Dual-Ethernet port provides support for both star and

daisy chain networks, as well as ring networks (optional

RSTP switch required)

• Elegant and lightweight design, which is easy to operate

and maintains Honeywell’s unitary controller aesthetic.

• Color-coded removable terminal blocks for convenient

wiring and installation and fault-free insertion

• Built-in input/output ports support an expansion module

through the RS-485 port

• Enhanced network security with advanced security

encryption standards

• The embedded programming toolkit retains the style and

functions of the current tools while featuring an even more

user-friendly interface which is compatible with existing

WEBs tool editing programs.

• CE, BTL, UL and RoHS certification

PUC I/O extension modules are part of the Honeywell PUC Series programmable

unitary controller which supports Ethernet BACNet IP communication.

Two types of I/O modules extend the functions of the controller and meet the

need of more I/O points. The hardware design of the controller integrates with

the elements of Honeywell’s user experience, which embodies the essence of

people oriented concept no matter from appearance or usage. I/O extension

modules, integrated with the controller, is programmable by using the same

programming tools and can be widely used to control different building equipment.

Features

• Built-in input/output ports allowing extension module through RS-485 port to

enrich point combination

• Support the connection of points among controllers, namely “binding”, to make

invocation more convenient

• Additional network security with advanced security encryption standard

• Embedded programmable tool under niagara platform with user friendly interface,

compatibly use the programs edited by the existing WEBs tools

• CE, UL and RoHS certification

Features

• Built-in input/output ports allowing extension module through RS-485 port to

enrich point combination

• Support the connection of points among controllers, namely “binding”, to make

invocation more convenient

• Additional network security with advanced security encryption standard

• Embedded programmable tool under niagara platform with user friendly interface,

compatibly use the programs edited by the existing WEBs tools

• CE, UL and RoHS certification

Specifications

• Make:  Honeywell

• Model: PUC6002-EM2

• No. of Input & Outputs: UIx6. DOx2

• Communication: 485 Bus: 1 RS485 port, connected with the main controller,

supporting up to two IO extension modules, and 18-22AWG shielded twisted pair

cable are recommended for use.

• Nominal voltage: 20-30 VAC; 50/60 Hz

• Operating temperature 0°C – +50°C

• Relative humidity: 5%~ 95%  Non-condensating

• Protection rating IP20

Description

General

PUC I/O extension modules are part of the Honeywell PUC Series programmable unitary

controller which supports Ethernet BACNet IP communication.

Two types of I/O modules extend the functions of the controller and meet the need of

more I/O points. The hardware design of the controller integrates with the elements

of Honeywell’s user experience, which embodies the essence of people oriented

concept no matter from appearance or usage. I/O extension modules, integrated

with the controller, is programmable by using the same programming tools and can

be widely used to control different building equipment.

Features

• Built-in input/output ports allowing extension module through RS-485 port to enrich

point combination

• Support the connection of points among controllers, namely “binding”, to make

invocation more convenient

• Additional network security with advanced security encryption standard

• Embedded programmable tool under niagara platform with user friendly interface,

compatibly use the programs edited by the existing WEBs tools

• CE, UL and RoHS certification

Specifications

• Make:  Honeywell

• Model: PUC5533-EM2

• No. of Input & Outputs: UIx5. DIx5. AOx3. DOx3

• Communication: 485 Bus: 1 RS485 port, connected with the main controller,

supporting up to two IO extension modules, and 18-22AWG shielded twisted pair

cable are recommended for use.

• Nominal voltage: 20-30 VAC; 50/60 Hz

• Operating temperature 0°C – +50°C

• Relative humidity: 5%~ 95%  Non-condensating

• Protection rating IP20

Features

• Built-in input/output ports allowing extension module through RS-485 port to enrich

point combination

• Support the connection of points among controllers, namely “binding”, to make

invocation more convenient

• Additional network security with advanced security encryption standard

• Embedded programmable tool under niagara platform with user friendly interface,

compatibly use the programs edited by the existing WEBs tools

• CE, UL and RoHS certification

How Does It Work?

ControlEdge provides an IIoT-ready open platform, enabling users to better leverage

data across their assets. Interoperable multi-level and multi-platform open

communication provides flexible and scalable design, enabling standardization with

less hardware.

A common HMI for PLC and Experion means fewer operator and engineering stations,

less hardware and wiring, reduced IT licensing, and less training with a common

operator interface.

Embedded cyber security helps improve compliance and availability and reduce risk.

Features include secure boot to prevent uploading of unauthorized software, a built-in

firewall, and a certified secure development lifecycle to ensure security is built in from

the start.

The PLC is part of the ControlEdge family of controllers providing unprecedented

connectivity through all levels of process and business operations. It is one of the

first controllers supporting Honeywell’s IIoT-ready initiative.

ControlEdge PLC Users benefit from an easier configuration, efficient operations,

and reduced maintenance as the PLC helps liberate plant personnel from manual

processes. Its use of OPC UA protocol and its built-in cyber security enable smooth

integration to a range of instruments, equipment, and software. By offering

Universal I/O, ControlEdge provides remote configuration and late design change

flexibility for improved project implementation as part of our LEAP™ project

execution methodology.

What Is It?

The PLC is part of the ControlEdge family of controllers providing unprecedented

connectivity through all levels of process and business operations. It is one of the

first controllers supporting Honeywell’s IIoT-ready initiative.

ControlEdge PLC Users benefit from an easier configuration, efficient operations,

and reduced maintenance as the PLC helps liberate plant personnel from manual

processes. Its use of OPC UA protocol and its built-in cyber security enable smooth

integration to a range of instruments, equipment, and software. By offering

Universal I/O, ControlEdge provides remote configuration and late design change

flexibility for improved project implementation as part of our LEAP™ project

execution methodology.

What Problems Does It Solve?

Honeywell can serve as your single vendor for all automation needs, including DCS,

PLC,SCADA, Field Device Manager for asset management, and an HMI panel PC –

all with seamless integration and support.

• Faster system setup, testing, and troubleshooting

• Flexible and scalable design

• Standardization with less hardware

• Investment protection and easier maintenance

• Built-in cyber security

• Seamless support

• Reduced cost over the lifecycle.