Category: Honeywell

FEATURES AND BENEFITS

•  Modular design fits a wide variety of applications

•  Up to 9 modules, power supply and battery can be accommodated by the PRO22ENC1.

PRO22ENC2 and PRO22ENC5 (no battery) enclosures

•  User programmable relay outputs allow for specific control needs

•  User programmable alarm inputs offer flexible system configuration and control

•  RS485 communication to all modules

•  Analog to digital converter technology provides digital filtering and input conditioning

•  Dedicated cabinet tamper and power monitor inputs

•  Supports the choice of normally open, normally closed, supervised, and non-supervised

circuits

•  Supports a wide range of reader technologies including OSDP and Wiegand

•  System off-line modes customizable per reader include secured access, locked (no

access), and unlocked (full access)

•  Supports multiple reader and card formats for maximum flexibility and security options

•  Operating modes includes locked, unlocked, secure access, card only, card and PIN,

card or PIN and PIN only

•  Any combination of 16 downstream I/0 or readers modules may be connected

to the PRO42IC RS485 ports. 4.000 ft (1.250 m) total bus length per port

•  Supports over 50.000 transaction buffer

The PRO4200 Series of access modules are designed to accommodate various

mounting options. Units can be mounted in a rack configuration (PRO22ENC1.

PRO22ENC2 and PRO22E C5) when space is limited, or in a tile mount configuration

(PRO22ENC3).

•  The PRO22ENC1 is a wall-mounted enclosure rack unit (See picture)

•  The PRO22ENC2 is a 19” rack-mounted enclosure rack unit

•  The PRO22ENC5 is a rack unit which fits inside a customer’s enclosure

* The new PRO42IC Intelligent Controller provides I/O support for up to 2 doors

with a maximum of 2 OSDP readers per door or 1 Wiegand reader per door.

The PRO42R1 provides I/O support for up to 1 door and the PRO42R2 supports

up to 2 doors.

The PRO42R1 and PRO42R2 will support a maximum of 2 OSDP readers per door

or 1 Wiegand reader per door.

PRO4200 modules provide latest bi-directional and strong encrypted OSDP

communication with the Access Control readers. For legacy and retrofit

installations, Wiegand format is still supported.

The PRO42OUT interfaces provide up to 16.

Form C, 30 VDC, 2A relay output controls depending if the board is rack or

tile-mounted, power fail and panel tamper when tile mounted.

Relays may be used for elevator control, status annunciation and for general

facility control, such as door monitoring.

The PRO42IN interfaces provide 16 supervised alarm inputs and a dedicated

power fail and panel tamper when tile mounted. An analog to digital converter

samples the input values and the digitized result is filtered and processed.

Filter parameters are configurable for each input point, resulting in the ability

to specify a custom End-Of-Line (EOL) resistance value, sensitivity range and

timing parameter.

The PRO4200 professional series family of access control modules is

designed for high density installations.

The PRO4200 professional series can be managed through WIN-PAK®

integrated security suite for more advanced features such as Video

integration, advance reporting, rules and photo badging, elevato

control , touch-less access and mobile credential management.

Supporting up to 18 doors per enclosure and 34 doors per intelligent

controller along with up to 100.000 card capacity, PRO4200 Series

provide a combination of small installation footprint and superior cost

per door ratio.

The new PRO42IC Intelligent Controller provides I/O support for 2 doors

in WIN-PAK 4.9 or higher *. The PRO42R1 provides I/O support for one

card access reader, while the PRO42R2 support two card access readers.

Both interface with the intelligent control module (PRO42IC). In the event

that communication to the intelligent control module is lost, the card

access readers be individually configured to allow entrance based on

security needs. This customization allow or a be configured as secured,

locked and unlocked.

The PUC16000-EM2 and PUC00016-EM2 expansion modules are compatible with Honeywell’s existing

PUC/PEC series controllers,ensuring seamless system upgrades and expansions by users, protecting

investments, and ensuring long-term reliability and performance of the system.

The product is designed in a rail mounted manner, to ensure that the product can be easily installed

on standard DIN rail. The produc is flexible and convenient and is particularly suitable for scenarios

that require high modularity and maintainability.

The PUC16000-EM2 and PUC00016-EM2 expansion modules are used together with an Ethernet controller.

The overall concept is to improve the design and configuration eficiency of basement ventilation, water

supply and drainage,floor fresh air units, circuit lighting, multi-parameter sensors, and power metering,

effectively respond to complex building automation needs, achieve refined management,improve energy

efficiency, and save costs.

FEATURES

•  The I/O expansion module is used together with Ethernet controller to complete more device monitoring

and improve system configuration efficiency

• Fully programmable on the Ethernet controller via programming tools to meet different HAVC applications

• Up to 2 extension modules can be connected to a PUC controller

• Up to 8 extension modules can be connected to a PEC controller

• Elegant design, light weight and easy to operate, which continues Honeywell’s style on the unitary controller

• Color-coded removable terminal blocks for differentiating signal types enable convenientand fault free

termination

• Built-in input/output ports allowing extension module through RS-485 port to enrich point combination

• Support the connection of points among controllers,namely” binding”, to make invocation more convenient

• Additional network security with advanced security encryption standard

• Embedded programmable tool under Niagara platform with user friendly interface,compatibly use the

programs edited by the existing Alaya tools

• CE,UL and RoHS certifications

The programmable unitary controller expansion module supports Ethernet communication network

controller, and is ued to expand system capacity, to meet the management requirements of more

input/output devices,greatly improve system efficiency, and better protect users’ overall investment.

The family-based system design enables the expansion module and controller to be freely

programmable with the same programming tools and flexibly and widely applied to the control

ofintelligent building equipment accordingly.

The PUC16000-EM2 and PUC00016-EM2 expansion modules are designed for the full life cycle of

intelligent building automation system, including the design phase, installation and commissioning

phase, and post-maintenance phase, to ensure optimal support for each link and achieve efficient

operation and long-term stability of the entire system.

The PUC16000-EM2 universal input expansion module has a 16-bit resolution and provides a higher

monitoring accuracy to ensure detailed and accurate system response.

The design of PUC16000-EM2 and PUC00016-EM2 expansion modules covers the maintenance and

update requirements of existing building automation systems. The appearance design is more compact

to adapt to existing control cabinets or other installation environments. The color identification of wiring

terminals and clear indicator light design aim to simplify thecommissioning and installation process.

At the same time, a more reasonable interface alocation ensures the resource utilization of building

automation system.

Honeywell PUC series programmable unitary controllers support BACnet MS/TP

communication protocol. This PUC series DDC controllers are available in two

models: PUC5533-PB2 and PUC6002-PB2.The hardware design of the controllers

integrate with the elements of Honeywell’s user experience, which embodies the

essence of people-oriented concept no matter from appearance or usage.

Both controllers are compatible with Honeywell’s existing systems,

free programmable by using the same programming tools, and are widely used to

control a variety of electromechanical devices in buildings.

FEATURES

•  A universal controller fully compliant with BACnet MS/TP communication

protocol enables more flexible field deployment and more equipment monitoring

•  The controllers support free programming and fully meet a variety of HVAC

application scenarios

•  Elegant design, light weight and easy to operate, which continues Honeywell’s

style on the unitary controller

•  Color-coded removable terminal blocks for differentiating signal types enable

convenient and fault free termination

•  The controller supports on board input/output points and communication

connections through the standard BACnet MS/TP protocol, with a rich combination

of points and flexible local deployment

•  The controllers support Sylk protocol and it can be used to connect to the

TR42/TR42-E display control panel

•  Support the connection of control points between controllers, so that the call

of information between controllers more freely

•  Enhanced network security, compliant with advanced security encryption

standards

•  Embedded programmable tool under Niagara platform with user friendly interface,

compatibly use the programs edited by the existing WEBs tools

•  CE, UL and RoHS certification

Features

• The BACnet IP controller supports Ethernet communication

and receives BTL (B-AAC) certification.

• PEC hosts automation features such as schedule, alarm, can

work independently.

• Fully programmable to meet different HVAC applications.

• Fast response in downloading and updating data.

• Dual-Ethernet port allows it to support both star and daisy chain

connection, as well as ring connection (RSTP switch required).

• This product supports dynamic or static IP address.

• Adopting Honeywell’s universal controller features, the stunning

external design safeguards its flexible and easy-to-use

operation.

• Color-coded removable terminal blocks enable convenient and

fault free termination.

• PEC8445-PB1-SM supports connections to extension modules

using the EM bus with its own input/output points.

• PEC8445-PB1-SO supports access to Modbus RTU data from

such as smart meters and FCUs, using the Modbus RTU bus

with its own input/output points.

• Additional network security with advanced security encryption

standard.

• Embedded programmable tool under Niagara platform with

user friendly interface.

• The graphical programming tool supports offline simulation.

• CE, BTL, UL, and RoHS certification.

Overview

As a programmable unitary controller, PEC8445 is a BACnet

advanced application controller that receives the BTL (B-AAC)

certification and supports the BACnet IP communication protocol.

PEC hosts automation features such as schedule, alarm.

PEC8445-PB1-SM supports the Honeywell EM communication

bus, which can connect up to eight extension modules.

PEC8445-PB1-SO supports the Modbus RTU communication

protocol, which can connect to Modbus RTU devices, such as

smart meters and networked FCUs.

PEC8445 provides fast downloading and data updating, and

supports numerous network topologies allowing flexible

networking and wiring. The controller hardware incorporates

Honeywell user experiences, underscoring the human-friendly

element in both appearance and use. The controller is

programmable and can be widely used to control different

building equipment.

Electrical

• Rated Voltage: 24 VAC; 50/60 Hz

• Power Consumption:

5 VA max. (controller only)

15 VA max. (including the controller and all inputs/outputs

and communications)

Operating Environment

• Storage Temperature: -40°C to 65.5°C

• Operating Temperature: 0°C to 50°C

• Relative Humidity: 5% to 95% non-condensing

• Protection rating: IP20

Dimensions (H/W/D)

• PEC8445: 220*115*57.5MM