Welcome to the official website of CNIACS Automation Technology Co., Ltd!
0

Category: Industry Trends

Home / Industry Trends (Page 367)
March 3, 2025 BY
IN GE

139-H-FLC Full Load Current Output Option Relay

The Full Current Output Option Relay 139-H-FLC is a horizontal mounting specialty model.

This model has an external reset switch that works in conjunction with the front panel reset switch.

This model also has an emergency restart option.

Product Description

Model 139-H-FLC is a full load current horizontal mount motor protection relay.

This model has a full load current of 4 to 20 milliamps. Associated protections listed for this relay include overheating, stall-mechanical blocking,

Rotor Lockout, Undercurrent, Ground Fault, Single Phase/Unbalance, Repeat Start, and Overload Protection with selectable curves.

This relay will protect three-phase AC motors from environmental influences that can cause damage.

The 139-H-FLC relay will be used in six applications; one of the applications is to ensure user safety.

This application will utilize the ground fault function to find leakage currents caused by moisture or potential winding shorts in mines, thus preventing shock hazards.

As mentioned above, the relay will be mounted horizontally; it should be noted that a rectangular panel cutout is required for whichever mounting orientation is chosen for the relay.

Once the current breaker is available, the relay will be held in place by two U-clips and then prepared for wiring.

The 139-H-FLC relay can be supplied with ground fault current and it will accept all current carrying conductors through the ground fault current window.

Please note that it is highly recommended that at least two current leads need to be wound together to minimize noise pickup on the relay.

There is a specially designed current that can be used to help output lower level signals.
March 3, 2025 BY
IN ABB

ABB Ability Symphony Plus Distributed Control System (DCS)

ABB’s new SDe Series improves plant reliability and efficiency with seamless automation system upgrade

ABB Ability Symphony Plus SDe Series continues to innovate and modernise legacy process control system installations with minimal risk and disruption to the plant

Control system upgrades are key to future-proofing, protecting and optimising plant operations across all industries

Plant managers can reuse existing cabinets, field wiring, terminal equipment and cabling to plan progressive system upgrades

ABB has introduced the ABB Capability™ Symphony Plus SDe series is a portfolio of hardware products that

helps modernise existing process control system installations while minimising risk and disruption to plant operations.

The new series enables power, water, oil and gas, pharmaceutical and pulp and paper

plant operators in industries such as power, water, oil and gas, pharmaceuticals and pulp and paper to upgrade their installed control systems to the latest technology, thereby improving efficiency and productivity.

The new SDe series continues to innovate to address one of the biggest challenges facing control system owners: upgrading existing infrastructure without disrupting operations.

By preserving field wiring, terminal units and modular wiring, SDe solutions

Helping plant owners protect process controllers, I/O modules and automation technology as it evolves

their Symphony Harmony and INFI 90 investments while process controllers, I/O modules and automation technology evolve, enabling progressive growth with minimal impact.

The SDe I/O family includes a range of intelligent analogue, HART, digital and hybrid I/O modules with redundancy that

can communicate with higher-level controllers via the local bus.

Each module is supplied with an evolved mounting base for Harmony Rack systems and is fully compatible with HR BRC410 and SD controllers.

The SDe Series I/O product line includes digital and analogue modules for horizontal or vertical DIN rail mounting and integration with intelligent field devices and protocols.

Hardwired I/O and fieldbus I/O co-exist, using the same library of function blocks to build real-time control applications.
March 3, 2025 BY
IN Woodward

Woodward CPC-DX Redundant Skid Mounted Current Pressure Converter

The CPC-DX 10 bar, 2 zone, redundant, has an enhanced dynamic dual transmission current-to-pressure converter skid for on-line (automatic and manual switching) service capability for uninterrupted operation to position single acting turbine valve servos in critical applications.

Features and Functions

Woodward’s redundant skid-mounted current-to-pressure converter (CPC-DX) is an electro-hydraulic pressure-regulating control valve for positioning single-acting steam turbine valve servos/actuators.

The redundant version of the CPC-DX accepts a 4-20 mA pressure demand signal and accurately controls oil pressure to precisely position the single-acting steam turbine speed control valve.

Accurate and stable steam valve control is directly related to increased steam turbine speed and load control and reduced mechanical wear on the system.

The integrated design of the CPC-DX redundant version allows for the cost-effective purchase and installation of a hydraulic assembly that provides all the isolation and support benefits of a fully segmented current-to-pressure converter.

Features:

Anti-fouling .

. No small passages to block .

.111 N (25 lb) rotary chip shear .

. Self-cleaning valve design

Automatic and manual switching

Fast changeover time

. Minimised system disturbances

Precise pressure control

Increased reliability

. High Pressure Signal Selection Design

. In-line Repairable

. Master/Slave Logic

Includes isolation valves

Protected with padlock

Large pressure gauge

Remote master/slave indication

Compact size

Available in 10 and 25 bar models

Division 2 and Zone 2 Hazardous Location Approved
March 3, 2025 BY
IN Reliance

Reliance WR-D4008 Programmable Logic Controller

Product Description.

The Reliance Electric PSC7000 WR-D4008 PLC module is an advanced programmable logic controller designed to streamline industrial processes.

It offers superior control features, robust performance and seamless integration with existing automation systems.

The module is a reliable solution for industries seeking an efficient and cost-effective automation solution.

Features

1. High-speed processing: The PLC module has a powerful processor for high-speed data processing and fast response times.

2. Expandable I/O capacity: With its expandable I/O capacity, the module can accommodate a variety of input and output devices for flexible system configuration.

3. User-friendly interface: The module features an intuitive and user-friendly interface that simplifies programming, monitoring and troubleshooting tasks.

4. Powerful Communication Capabilities: Supports a variety of communication protocols for seamless integration with other devices and systems.

5. Enhanced Security: The PLC module integrates powerful security features to protect sensitive data and prevent unauthorised access.

Applications

Reliance Electric PSC7000 WR-D4008 PLC modules are used in a wide range of industrial applications, including:

1. Manufacturing: Optimise production processes, monitor equipment performance and ensure precise control of key parameters.

2. Energy: the module helps to manage power distribution, monitor energy consumption and control renewable energy systems.

3. Oil & Gas: Facilitates remote monitoring and control of pipelines, storage tanks and drilling equipment to improve operational efficiency and safety.

4. Water treatment: The PLC module assists in the automation of water treatment plants to ensure precise control and efficient operation.

5. Transport: It can effectively control and monitor traffic systems, railway networks and airport infrastructure.

Technical Specifications

The technical specifications of Reliance Electric PSC7000 WR-D4008 PLC module are as follows:

1. Processor: Advanced 32-bit processor with 100 MHz clock speed.

2. Memory: 256 KB RAM and 2 MB flash memory for programme storage.

3. I/O capacity: Up to 4096 digital I/O points and 128 analogue I/O points.

4. Communication ports: Multiple serial and Ethernet ports for seamless connectivity.

5. Operating temperature: -10°C to 60°C (14°F to 140°F) for reliable performance in a variety of environments.
March 3, 2025 BY
IN Woodward

Woodward APECS™ 0175 Engine Linear Actuator

Description

APECS™ 0175 linear actuators deliver precise positioning and form the foundation of a full electronic governing system. 

Many of the moving parts normally associated with electric actuators are eliminated, prolonging the MTBF (mean time between failure). 

The actuator design employs the principle of variable reluctance for consistent force over the entire stroke. 

This simple design of a proportional electric linear actuator utilizes a linear armature whose magnetic force is proportional to the input current to the coil. 

These actuators are easy to install by mounting near the fuel system with a direct connection to the fuel control rod or level. 

In most installations, the normal rotary-torotary connection is eliminated, resulting in a more trouble-free and accurate control system. 

APECS 0175 actuators are suitable for installation on diesel, gasoline, or natural gas engines with fuel system force requirements of less than 4.0 pounds (17.8 N) of force. 

Woodward also manufactures 0175 actuators integral to the engine block or fuel pump. 

 All-purpose, externally mounted 

 Pull or push actuation 

 Flange or base mount 

 Internal spring return to minimum fuel position 

 Corrosionresistant, plated steel housing, and base or flange 

 Precise engine speed control when used with APECS electronic controllers 

 Variety of mounting styles, plungers, terminations, and springs available

Applications

Provides proportional fuel control for construction, industrial, and agricultural equipment. 

1.75-inch (44.4 mm) diameter spring-return actuator, pull or push models, three spring types available.

Electrical Specifications

 Stroke 0.75 inch (19 mm) minimum 

 Force 3.5 lb (15.6 N) @ 23 °C (with SI spring, normal current) 

 Work Rating 0.3 lb-ft (0.4 N-m) 

 Nominal Rated Current 4.3 A (12 V [dc]); 2.3 A (24 V [dc]) 

 Response Time 30 ms for 10 % to 90 % of stroke 

 Resistance (nominal) 2.80 Ohms (12 V); 10.63 Ohms (24 V) 
March 3, 2025 BY
IN ABB

ABB EMB01S-XIO Evolution Module Base

The EMB01S-EMR Evolution Module Base mounts an AI12e, AO02e, DI06e, or DO01e I/O module to the EMC-_B0x Evolution Mounting Base.

or DO01e I/O modules to the EMC-_B0x Evolution mounting base.

The base connects the I/O module to the HN800 I/O bus and connects the I/O cable to the field terminal.

The chassis supports all functions of the AI12e, AO02e, DI06e, or DO01e I/O modules. This includes optional module redundancy.

Features and Benefits

Mounts AI12e, AO02e, DI06e, or DO01e I/O modules to the EMC-_B0x Evolution mounting base

Connecting I/O modules to the redundant HN800 I/O bus

Connect I/O module to NTDI0x TU via NKTU01 cable

Connect I/O module to NIDI01 TM via NKTU02 or NKTM01 cable

General information

Article number 7PAA005096R1 (EMB01S-XIO)

Lifecycle status active

Line redundancy yes

Channel 14. 15 or 16

Hot Swap No

Supported IO modules AI12e, AO02e, DI06e, DO01e

Single or redundant Single

Form Factor EMC-_B0_ Evolution Mounting Chassis

Mounting EMC-DB01. EMC-DB02. EMC-SB01. EMC-SB02

HN800 Bus length 190 mm

MTBF (per MIL-HDBK-217-FN2) PR E: 245.577 hours @ 30˚C, 244.473 hours @ 40˚C, 240.272 hours @ 70˚C

MTTR (hours) 8 hours
March 3, 2025 BY
IN Emerson

Emerson DeltaV™ VerticalPlus Input/Output Subsystem Carrier

Functional features:

Designed for SIS

Modular design for flexible installation

Allows for online expansion

Increased I/O density

I/O density for cabinet-mounted systems

Introduction to the DeltaV™ VerticalPlus I/O Rack

Keep your I/O subsystems running efficiently with DeltaV™ VerticalPlus I/O Racks.

The VerticalPlus platform allows you to integrate DeltaV SIS logic solvers vertically, giving you the flexibility you need for cabinet design.

Power supplies/controllers and I/O carriers are modular.

You buy only what you need, but rest assured that as your system grows, you can add plug-and-play carriers-it’s easy!

The Advantage

Designed specifically for SIS. The redesigned carrier supports simplex and redundant SLS modules.

These modules communicate via a redundant safety bus, which is separate from the BPCS communications.

The VerticalPlus carrier also communicates with other SIS nodes on the vertical and horizontal carriers via redundant SISNet repeaters.

The modular design allows for flexible installation. A single T-shaped DIN rail is all that is needed to mount the power/controller carrier in place.

Fieldbus power is now independent for each individual card.

The modular design approach of the DeltaV system allows you to add I/O carriers as needed.

Allows you to expand online. Additional carriers can be added online as needed.

Increases the density of the cabinet-mounted system. Six I/O carriers can be mounted on one side of a standard 1200mm x 600mm x 2200mm cabinet.
March 3, 2025 BY
IN Foxboro

FOXBORO IDP10 I/A Series® Electronic Differential Pressure Transmitter

The Foxboro® brand Model IDP10 is an analogue output, two-wire d/p Cell® transmitter.

It provides accurate, reliable differential pressure measurement and transmits a 4 to 20 mA analogue output signal.

High Reliability and Value

 is available in conventional or low-profile construction.

 Excellent performance and long-term stability based on microprocessor technology.

 Industry-standard 316L ss, Co-Ni-Cr, nickel alloy(1), monel alloy, or tantalum sensor materials, depending on transmitter construction.

 Available in durable aluminium or 316 SS housings; both meet NEMA 4X and IP66 ratings.

 Optional mounting bracket kits are available for duct, surface, or manifold mounting of the transmitter.

 Dual seal certified to ANSI/ISA 12.27.01-2003.

 CE marked; complies with applicable EMC, ATEX, and PED European directives.

 Designed for hazardous area installations. Versions are available to meet organisational explosion-proofing and zoning requirements.

 Standard 5-year warranty.

Affordable Smart Transmitter Features

When you need the flexibility and performance of a configurable smart transmitter, but don’t need a digital output signal, these transmitters offer excellent benefits at a very affordable price:

 Liquid crystal display (LCD) digital indicator with on-board pushbuttons

 Pushbutton configuration and calibration

– Linear or square root output

– Adjustable damping

– Forward or reverse output

– Fail-safe outputs; scale up or scale down

– Rearrange without applying pressure

 can be easily upgraded to a fully intelligent version (FoxCom™, HART® or FOUNDATION™ fieldbus)

I/A SERIES PRESSURE TRANSMITTERS The I/A Series pressure transmitter family includes d/p Cell, Gauge, Absolute, Multi-Range, Multi-Variable, and High Performance transmitters, as well as pressure seals with remote or direct connection.

and transmitters with remote or directly connected pressure seals, all featuring field-proven silicon strain gauge sensors and universal topside construction.
March 3, 2025 BY
IN ABB

ABB REF 542plus Multifunctional Protection and Switching Controls

Functions

The REF542plus multifunctional protection and switchboard control unit integrates all auxiliary functions in one unit.

The multifunctional unit also has a self-monitoring function. All functions are designed as freely configurable software modules.

As a result, the various operational requirements of a MV station can be met without any problems.

The versatility of the software allows the REF542plus to be used on every switchboard regardless of the specific application requirements.

Configuration

Each protection and control application can be easily configured via the software function module, which allows the following functions to be arbitrarily defined as part of the secondary system:

LEDs for local indication (meaning and colour)

Single line diagrams showing the status of switching devices

Protection programme

Control programmes

Interlocking programmes

Automation sequences

All functions of the switchboard can be specified in co-operation with ABB. The configuration results are saved and delivered to the user together with the switchboard.

By using the “Function Block” programming language (FUPLA), the REF542plus multifunctional protection and switchboard control unit provides engineers, in

especially non-software specialists, the opportunity to easily update switchboard operation and handling.

With the REF542plus, users can fully integrate secondary systems into a true programmable controller.

This flexibility is very favourable for defining control functions for automation sequences.

This can include, for example, interlocking of switchgear, preventing the release of specific protective functions and initiating switching sequences.

The REF542plus multifunction unit offers a wide range of logic functions so that the various required control schemes can be configured.

The required control schemes are configured. 
March 3, 2025 BY
IN Emerson

Emerson AMS 6500 Protection Monitor Configuration

Pre-configured user-selectable measurement types simplify software configuration

Password protection with 4 user login levels and customisable access rights

Context-sensitive help information to quickly resolve set-up issues

Includes trending, time functions, order analyses and start/stop data for comprehensive setup.

Configuration includes setup of basic predictive functions, including troubleshooting and diagnostics

Applications

The AMS 6500 Configuration Software for Machinery Protection allows you to configure protection modules, view real-time vibration monitoring systems and sensor health.

The intuitive configuration process begins with the selection of the card type. Next, the configuration software displays a simple table view.

All configuration settings are clearly visible. Tabs help you categorise information between inputs, outputs, advanced machine diagnostics and management tasks.

diagnostic and management tasks. The allowable range for each required entry is clearly visible to help you understand the range of the parameter.

Preset parameters are automatically loaded when using Emerson sensors and transducers.

Real-time data can be displayed during system configuration to verify that wiring, card settings, and instrumentation are healthy and properly connected.

Real-time information such as gap voltage, waveform data, and overall vibration data can be viewed.

Ongoing maintenance functions such as resetting latching relays or loading saved configurations can be easily performed via software.

The software can be run on a PC or laptop.

The System Configuration Software allows you to configure the following monitors of the A6000 series

The following monitors of the A6000 series can be configured:

a6110. a6120. a6125. a6140. a6150. a6151. a6210. a6220. a6310. a6312. a6312-8.

a6410. a6620. a6630. a6740.a6740-10. a6824. a6824r

Basic Predictive Features

The AMS 6500 Configuration Software has a number of built-in trending functions that allow basic troubleshooting and prediction of the machine.

Master value trends are graphically represented, showing both card health and alarm values. The software can display vibration signals as a function of time,

The software displays the vibration signal as a function of time, the date of the FFT analysis with a resolution of up to 400 lines, and the FFT phase data. The software also displays the last time the machine was started or stopped.

The configuration software visualises the data and displays velocity over time and vibration over velocity for each channel.

Menu

Search for products

Back to Top
Product has been added to your cart