OVERVIEW

The General Specifications (GS) describe the features, functions, system configuration examples, engineering

environment, software operating environment, hardware configuration, installation environment, and compliant

standards of a turbomachinery controller using the STARDOM FCN autonomous controller, and outline the functions

of turbomachinery I/O modules.

As for the FCN, refer to “FCN-RTU Low Power Autonomous Controller Hardware” (GS 34P02Q13-01E), “FCN

Autonomous Controller Hardware (FCN-500)” (GS 34P02Q14-01E), “FCN-RTU Low Power Autonomous Controller

Functions” (GS34P02Q02-01E) and “FCN Autonomous Controller Functions (FCN-500).” (GS34P02Q03-01E)

 CONFIGURATION

FCN-RTU consists of the following modules:

• Base module (NFBU050.NFBU200)

• Power supply module (NFPW426.NFPW444)

• CPU (with built-in I/Os) module (NFCP050)

Short type  (NFBU050)

F01E.ai

Long type  (NFBU200)

F01cE.ai

• Additional I/O modules (up to eight modules can be mounted on a base module)

There are two types of base module.

Short type : Configuration with a NFBU050 base module (short)

Long type : Configuration with a NFBU200 base module (long)

The following table shows a list of the functions of each configuration.

I/O MODULES

An autonomous controller FCN-RTU supports the following I/O modules and

up to eight of them can be installed on it.

For details, refer to the following General Specifications.

• GS 34P02Q31-01E Analog I/O Modules

• GS 34P02Q35-01E  Digital I/O Modules

• GS 34P02Q55-01E  Foundation fieldbus Communication Module

• GS 34P02Q57-01E  PROFIBUS-DP Communication Module

• GS 34P02Q58-01E  CANopen Communication Module

 GENERAL

This document describes the general specifications of

the FCN-RTU low power autonomous controller with

NFCP050 CPU module.

For functions, refer to “FCN-RTU Low Power

Autonomous Controller Functions” (GS 34P02Q0201E).

 FEATURES

• High performance and low power consumption

modular controller

• Memory with ECC.

• FCN-RTU can be used wide temperature range and

high altitude place.

• Analog and digital I/Os adequate for gas/oil wellhead

control built in CPU module

• Four serial ports for plural communications built in

CPU module

• Up to eight additional I/O modules (with NFBU200)

• Wide voltage range (10 to 30 V DC input) power

supply module (NFPW426)

• Power supply module can be duplexed (NFBU200

with NFPW444)

• Low heat dissipation eliminates the need for a fan

• A wealth of RAS features — CPU self-diagnostics,

temperature monitoring, I/O diagnostics, and more

• Additional I/O modules (except CPU embedded I/Os)

hot-swappable

 FEATURES

l High Performance

• Applicable to a variety of processes, from sequence

control processes to analog control processes.

• Inter communication with other autonomous

controllers or other equipment for inter-linked control

actions, in addition to stand-alone operation.

• Using Versatile Data Server Software (VDS) or

Supervisory Systems (FAST/TOOLS) together allows

a system with enriched operation and monitoring

functions to be built up.

• An FCN/FCJ OPC server for Windows can be used

for accessing the data of an FCN/FCJ from an OPC

(OLE for Process Control) client on a PC.

• Java-enabled — enables users to implement various

applications, including displaying images on a Web

browser, saving data files, transferring files using the

FTP protocol, sending/receiving e-mails and public

network connection using the PPP protocol.

With InfoWell, applications such as web browsers

and  e-mail communications can be utilized without

programming.

l High Reliability

• RAS features (CPU self-diagnostics, temperature

monitoring, I/O diagnostics, and more)

• Memory with error-correcting code (ECC)

• Low heat dissipation, eliminating the need for a

cooling fan

• The Ethernet control network, CPU, power supply

module, and SB bus (FCN local bus) can all be

duplexed for an FCN-100.

• The control network can be duplexed for an FCJ.

l Engineering Efficiency

• Five IEC 61131-3 compliant programming languages

are supported, enabling the user to selectively use

these languages according to their purposes of use

and applications.

• Control logic can be encapsulated into software

parts for reuse, allowing efficient and quality system

configuration.

• Application Portfolios packed with Yokogawa’s

application expertise, enable easy implementation of

advanced functions, including control-loop instrument

blocks and communication with non-Yokogawa PLCs.

l Easy Maintenance

• Online download function allows a control application

to be modified during system operation

• All modules are hot-swappable with an FCN-100.

 GENERAL

This document describes the system configurations,

development/maintenance, software configurations,

network and specifications, for two types of

autonomous controllers in the STARDOM: FCN with

NFCP100 CPU module and FCJ.  (FCN is an acronym

for field control node, and FCJ for field control

junction.)

Notation in this document:

• The term “FCN” refers to the module consisting type

autonomous controllers.

• The term “FCN-500” refers to the autonomous

controllers with NFCP501/NFCP502 CPU module.

• The term “FCN-100” refers to the autonomous

controllers with NFCP100 CPU module.

• The term “FCN-RTU” refers to the low power

autonomous controllers with NFCP050 CPU module.

• The term “FCJ” refers to the all-in-one type

autonomous controllers.

FCN-100 is a controller module consisting of CPU, I/O,

and other modules as necessary.  It supports a variety

of I/O modules, provides a highly reliable system with

duplexed power supply, CPU and control network

options as well as superb scalability.

For hardware details, refer to FCN Autonomous

Controller Hardware (FCN-100), GS 34P02Q12-01E.

 CONFIGURATIONS

l    System    Configurations

FCN-500 is locally mounted controllers to allow diverse

systems to be configured according to the individual

users’ work sites; however, the possible system

configurations can be broadly divided into three types:

• A system consisting of a standalone FCN-500

• A system in which FCN-500s are connected to

each other through the control network and perform

interlinked actions (up to a total of 15 FCNs and FCJs

can intercommunicate with one FCN/FCJ).

• A system in which one or more FCN-500s are

interlinked with VDS, FCN/FCJ OPC Server or FAST/

TOOLS.

VDS and FCN/FCJ OPC server, FAST/TOOLS can

be connected up to 8 units in total. The FCN/FCJ

OPC server counts as 2 units because the DA server

and AE server operate. The FAST/TOOLS with

duplexed network counts as 2 units.

Development    and    Maintenance    of    FCN-500

A PC/AT-compatible computer is used for development

and maintenance of applications for an FCN-500.

Resource Configurator is a tool program to be installed

in the computer used for maintenance, and is used to

make the FCN-500 hardware settings.

The user can access FCN-500s via a Web browser

from a PC to make detailed settings for the network

and so on, and to perform maintenance operations

such as database backup and restoration.

Logic Designer is a tool program for the development

of control applications (IEC 61131-3) for an FCN-500.

Logic Designer requires a license to run.

 FEATURES

l High Performance

• Applicable to a variety of processes, from sequence

control processes to analog control processes.

• Intercommunication with other autonomous

controllers or other equipment for inter-linked control

actions, in addition to stand-alone operation.

• Using Versatile Data Server Software (VDS) or

SCADA Software (FAST/TOOLS) together allows

a system with enriched operation and monitoring

functions to be built up.

• An FCN/FCJ OPC server for Windows can be used

for accessing the data of an FCN/FCJ from an OPC

(OLE for Process Control) client on a PC.

• Duolet application is Java language application and

enables users to implement the following functions

on FCN-500; displaying images on a Web browser,

saving data files, transferring files using the FTP

protocol, sending/receiving e-mails and public

network connection using the PPP protocol.

l High Reliability

• RAS features (CPU self-diagnostics, temperature

monitoring, I/O diagnostics, and more)

• Memory with error-correcting code (ECC)

• Low heat dissipation, eliminating the need for a

cooling fan

• The Ethernet control network, CPU, power supply

module, and E2 bus/SB bus (FCN local bus) can all

be duplexed for an FCN-500.

l    Engineering    Efficiency

• Five IEC 61131-3 compliant programming languages

are supported, enabling the user to selectively use

these languages according to their purposes of use

and applications.

• Control logic can be encapsulated into software

parts for reuse, allowing efficient and quality system

configuration.

• Application Portfolios packed with Yokogawa’s

application expertise, enable easy implementation of

advanced functions, including control-loop instrument

blocks and communication with PLCs.

l Easy Maintenance

• Online download function allows a control application

to be modified during system operation

• All modules are hot-swappable with an FCN-500.

GENERAL

This document describes the system configurations,

development/maintenance, software configurations,

and network specifications for the FCN autonomous

controllers with NFCP501/NFCP502 CPU module in

the STARDOM. (FCN is an acronym for field control

node.)

Notation in this document:

• The term “FCN” refers to the module consisting type

autonomous controllers.

• The term “FCN-500” refers to the autonomous

controllers with NFCP501/NFCP502 CPU module.

• The term “FCN-100” refers to the autonomous

controllers with NFCP100 CPU module.

• The term “FCN-RTU” refers to the low power

autonomous controllers with NFCP050 CPU module.

• The term “FCJ” refers to the all-in-one type

autonomous controllers.

FCN-500 is a controller consisting of CPU, I/O, and

other modules as necessary. It supports a variety of I/O

modules with excellent scalability. And, highly reliable

system can be configured with duplex power supply

modules, CPUs, control network system.

For hardware details, refer to FCN Autonomous

Controller Hardware (FCN-500), GS 34P02Q14-01E.