Welcome to the official website of CNIACS Automation Technology Co., Ltd!
0
April 24, 2025 BY
IN Uniop

Uniop ERT-16 Industrial PLC Workstation

The ERT-16 fulfills the need for a powerful yet cost effective operator interface system. Displays are sixteen

lines of a pixel based LCD in monochrome color. These pixel addressable displays allow graphic capabilities with our Designer for Windows software package. Each page can contain 16 lines. Each line can contain up to 40 characters. Brightness control is provided to adjust the display for easy viewing under nearly any condition.

Display Variables

PLC internal variables can be shown on any of the many display pages. The number of variables that can be viewed at one time is limited only by the display size. UniOP also provides scaling (linear conversion) of the displayed data. The final value can then be shown in several useful formats including bargraph, date, time,decimal, bit,exadecimal, floating point, and string. Data entry with valid range verification is also available for each data type.

Data Entry

The ETT-VGA gives the user eight configurable function keys and seven user-definable LEDs. The analog touchscreen adds the ability to create touchcells as small as a single character or as large as the entire screen.

ERT-16 Features

● NEMA 4/12 compliant enclosure

● CE approved

● UniNET network capabilities

● Keyboard Macro Editor

● Recipe configuration

● One RS-232 / RS-422 / RS-485 / 20mA current loop serial www.cniacs.com port, speeds up to 38,400 baud for direct PLC connection

● One RS -232 port for PC or printer communications

● 512 KB internal memory standard Flash EPROM

● Optional 512 KB memory upgrade (1 MB total memory)

● Real time clock with battery back-up

● Unlimited number of variables per page

● 1024 prioritized alarms

● Historical event list (last 256 events)

● Eight-level password protection

● Print reports, alarm list, and event list to serial printer
April 24, 2025 BY
IN Uniop

Uniop ePAD03 HMI with graphic display

Compact low-cost HMI with graphic display. The ePAD03 and ePAD04 panels are defining a new standard for entry-level HMI products. They are the ideal replacement for the successful MD00 Series. 

These products are also available with extended operating emperature range for use in extreme environmental conditions.

• Monochrome graphic display 120×32 pixels

• Downloadable fonts

• Scalable text

• 4 user programmable function keys with slidein legends

• 5 user programmable LED indicators

• Dual-driver communication

• Connection to industrial bus systems and Ethernet with optional modules

• IP65 front panel protection

• Version with extended operating temperature available

Highlights

The ePAD03 and ePAD04 HMI panels are compact low cost products yet extremely rich in functionality. The ePAD03 and ePAD04 are the ideal replacement for panels of the MD00 Series. 

They generally outperform the equivalent products and can be used in all cases except when the 20 mA current loop interface is needed. 

The products support the rich common functionality of the UniOP operator panels: 

• Powerful and intuitive programming with the UniOP Designer 6 software 

• Dual-driver communication capability 

• Support of more than 130 communication drivers for industrial devices 

• Optional modules for fieldbus systems (Profibus DP, CANopen, DeviceNet, Interbus) and Ethernet. Ethernet modules allow connection to field devices as well as programming the HMI from Designer. 

• Scalable fonts for effective presentation of information. 

• Display dynamic data in numerical, text, bargraph and graphic image formats 

• Recipe data storage. Recipe data can be transferred to an host computer using the Ethernet connection. 

• Multilanguage applications. The number of runtime languages is limited only by the available memory. All text information in the application can be exported www.cniacs.com in Unicode format for easier translation. 

• Powerful macro editor to configure keypad operation 

• Alarms and historical alarm list. Alarm and event information can be printed or transferred to an host computer using the Ethernet connection. 

• Eight level password protection. 

• Ethernet-based UniNet network to share data between UniOP HMIs and to serve data using UniNet OPC Server.
April 24, 2025 BY
IN Uniop

Uniop CP02R-04 Compact HMI devices

Compact HMI devices with 9 function keys/numerical keypad and display with 20 characters per line

Show up to 2 or 4 rows, 20 characters ofinformation

Choice of Vacuum Fluorescent orMonochrome LCD

Up to 16 user programmable function keyswith slide-in legends and LED indicators

Connection to industrial bus systems andEthemet with optional modules

IP65 front panel protection

Version with extended operating temperatureavailable

Highlights

The CP02 HMI panels are part of the UniOP family of entry-level products. They support the rich common functionality of the UniOP operator panels: 

• Powerful and intuitive programming with the UniOP Designer 6 software 

• Support of more than 130 communication drivers for industrial devices 

• Optional modules for fieldbus systems (Profibus DP, CANopen, DeviceNet, Interbus) and Ethernet. Ethernet modules allow connection to field devices as well as programming the HMI from Designer. 

• Dual-driver communication capability

• Display dynamic data in numerical and text formats 

• Recipe data storage. Recipe data can be transferred to an host computer using the Ethernet connection. 

• Multilanguage applications. The number of runtime languages is limited only by the available memory. All text information in the application can be exported in Unicode format for easier translation. 

• Powerful macro editor to configure touchscreen operation 

• Alarms and historical alarm list. Alarm www.cniacs.com and event information can be printed or transferred to an host computer using the Ethernet connection. 

• Eight level password protection. 

• Report printing to serial printer. Reports are freely configurable using Designer. 

• Ethernet-based UniNet network to share data between UniOP HMIs and to serve data using UniNet OPC Server. 
April 24, 2025 BY
IN Hitachi

Hitachi Energy Cable Accessories and Connectors GIS Plug-in Terminals

Cable accessories and connectors

GIS Plug-In Terminals

(2# and 3# connections)

TP-A 42 kV, 800 A 7 and TP-A 42 kV, 1250 A

GIS plug-in terminals (2# interface)

TP-A 42 kV, 800 A

Applications

GIS plug-in cable termination for XLPE-insulated single- or three-core cables with 42 kV copper or aluminum conductors.

Suitable for standard bushings in 2# inner www.cniacs.com cone GIS switchgear or transformers according to EN 50181.

Standards

GB/T 12706.4

IEC 60502.4

Features

– The cable termination consists mainly of a plug-in contactor, a stress cone and a tail pipe.

– Plug-in contactor

– Compression cone connection, safe and reliable

– Easy to install, rigid fixing, no special tools required

– Stress cone

– Compact and portable

– 100% routine testing

– Electrical and safety reliability

– For installation tools, please contact us
April 24, 2025 BY
IN ABB

ABB 560BOR01 RTU560 Product Family Binary Outputs

Applications

The module 560BOR01 controls 16 binary process signals via relay contacts. The output signals can be assigned to process functions according to configuration rules.

The module 560BOR01 can process the following types of signals:

– Single or double command (SCO or DCO) with 1- or 2-pole output, no checksum (n select 1).

– Single or dual commands (SCO or DCO) with 1.5 or 2-pole outputs, without checksum (1 out of n).

– Regulating step command (RCO), 1 or 2 poles

– Digital setpoint command, 8 or 16 bit, no strobe (DSO8 or DSO16)

– Digital setpoint command, 8 or 16 bit, with strobe (DSO8 or DSO16)

– Bit String Output, 1. 2. 8 or 16 bits (BSO1. BSO2. BSO8 or BSO16)

Modules allow switching voltages up to 150 V DC or up to 2 A continuous current.

Features

Binary outputs

The binary outputs utilize relay contacts.

The 16 outputs are divided into two groups. Each of the 8 outputs has a common circuit. The groups are isolated from each other and from the internal electronics.

The relay coil supply voltage (24 VDC) is switched by an www.cniacs.com internal relay (R17).

The relay coil supply voltage (24 VDC) is monitored internally before and during the command output.

Command outputs to the process equipment can be executed either directly or in conjunction with the command output monitoring module.

The command output monitoring module is responsible for checking the output circuits (1 out of n times). For more details, refer to the Command Output Monitor datasheet.
April 24, 2025 BY
IN ABB

ABB HMI560 New Module 560HMR01 Integrated Human Machine Interface

Advantages

– Plug and play: pre-installed operating system for immediate use of the integrated HMI

– Integrated solution: no separate PC or laptop required

– Reusable redundant power supply for the RTU560

– Easy wiring: all connectors are located on the front panel

– Monitor, keyboard and mouse can be connected to the RTU560

– Maintenance-free: no rotating parts (ventilators and hard disk drives)

– Space saving: 90% less space required compared to a 19-inch industrial PC

– Cost-optimized solution for station monitoring, control and diagnostics

Features of the 560HMR01

The 560HMR01 provides an integrated HMI that makes system monitoring easier and more efficient.

The integrated HMI board eliminates the need for a PC or laptop.

Local monitors, keyboards, mice, printers and speakers www.cniacs.com can be connected to the HMI board via USB, VGA and audio interfaces.

The rugged design of the module ensures maintenance-free operation with maximum reliability.

Existing power supplies in the rack can be reused and redundant power supplies are also supported.

In addition, the 560HMR01 provides a battery-buffered real-time clock that maintains the current time even when the power is turned off.

Firmware and operating system are installed in the module’s internal data memory.
April 24, 2025 BY
IN Kollmorgen

Kollmorgen EtherCAT® Bus Coupler

EtherCAT® Bus Coupler

The EtherCAT® Bus Coupler connects Real-Time Ethernet systems via modular, expandable electronic terminal blocks. A complete unit consists of a Bus Coupler, a set of Bus Terminals and a terminal.

Features
The EtherCAT Coupler connects the real-time Ethernet system EtherCAT with modular, expandable electronic terminal blocks. A unit consists of a Bus Coupler, a set of terminals and a terminal.

The Bus Coupler recognizes the connected Bus Terminals and automatically assigns them to the EtherCAT process image. The Bus Coupler is connected to the network via the upper Ethernet interface. The lower RJ 45 socket can be used to connect other EtherCAT devices in the same strand.

In an EtherCAT network, the EtherCAT Coupler www.cniacs.com can be installed anywhere in the Ethernet signaling section (100BASE-TX) – except directly on the switch.

EtherCAT (Ethernet Control Automation Technology) is an Ethernet solution for industrial automation characterized by excellent performance and particularly simple operation. etherCAT enables Ethernet star topologies to be replaced by simple line structures. In addition, EtherCAT can also be wired in the “classic” way using switches for the integration of additional Ethernet devices. The master does not require special plug-in cards and can be realized on any existing Ethernet controller using very simple interfaces. EtherCAT is therefore also ideally suited for small and medium-sized control applications and will open up new fields of application for distributed I/O.

For EtherCAT, stand-alone I/O systems with protection class IP 20 are available as EtherCAT Terminals. Unlike the Bus Terminals, in which the fieldbus signals are realized in a Bus Coupler on a terminal bus that is internally independent of the fieldbus, the EtherCAT protocol remains fully intact within the individual terminal.
April 24, 2025 BY
IN Full-V

Full-V FV-Z300/Z400 Specialized Motion Controller

Product Description:

FV-Z300/Z400 series controllers, is a special motion controller for special machine manufacturers to quickly deploy special machines with laser tracking function.

Support ring seam, straight seam, spiral and other specialized machine models, can support 3~32 vehicles, 12 welding guns, 24 laser sensing work together.

Product features:

Support 3~32 axes by single machine

Support 48 in/32 out IO

Support pulse, bus axis interface

24 units point/line structured light cooperative tracking

Support straight line, arc, curve interpolation

Support handheld touch screen and manual key control.

Full Ethernet communication, strong anti-interference ability.

Customized development to meet the application of different models

Tens of thousands of units shipped every year, reliable and stable hardware underlying algorithms.
April 24, 2025 BY
IN Kollmorgen

Kollmorgen AKM2G Servomotor 2G Motion Control System

AKM®2G Servo Motors

The Next Generation of Servo Motors Offering Industry Leading Performance with a Compact Footprint

The Advantages of AKM2G Servo Motors

•  With the same size, the AKM2G offers an average 30% more torque

• Installation of motors in the tightest space

• Ultimate motor efficiency over IE4 requirements

• Low cogging high dynamic motor design

•  Highest torque density on the market

• Quick start-up and plug-and-play detection

•  AKM2G windings optimized for AKD family drives

• Lower system cost due to single cable and perfect fit motor and drive

• Extended speed range using field weakening operation

• Precise positioning and low velocity ripple

•  Optimized system performance AKM2G and Kollmorgen drives

• Ready for Industry 4.0 using data transfer and storage in motor feedback

• Fail safe brake for vertical axis

• Innovative temperature sensor for optimal usage of rated temperature range by effective overload protection

• Compact effective design due to improved www.cniacs.com heat transfer and loss reduction

• Future oriented servo technology

• Scalable single cable solution with SFD3. Hiperface DSL and EnDat 2.2

• Fast and reliable plug with bayonet lock

• Fast mounting using direct access to the screws from the rear

• Ease-of-use servo system

• 23 frame size and design length combinations perfect fit for your application

•  Flexible feedback, winding and mount options

• IP65 shaft seal options for dry run and lubricated operation

• Designed for simplified Co-Engineered solutions

• CE, UL, RoHS, REACH and EAC conformance

•  Flexible in standard, easy to customize design
April 24, 2025 BY
IN Kollmorgen

Kollmorgen AKD2G Servo Drives 2G Motion Control System

Designing more advanced equipment

Realize your most ambitious designs without compromise. 2G Motion Control drives, motors and cables are designed to work together to achieve the highest performance.

The drives, motors, and cables in the 2G Motion Control System are designed to work together for maximum performance.

AKM2G servo motors provide an average 30% torque increase without changing form factor or mounting style.

AKD2G drives include advanced SafeMotion options, expandable I/O, and dual-axis models – all while maintaining the same drive size.

Delivering More Performance

Our highly regarded WorkBench GUI simplifies motion programming and debugging, and the drive’s graphic

display on the drive provides the information you need for efficient machine startup, troubleshooting and maintenance. Through our joint

design services, you can work directly with motion control experts who are committed to helping you achieve superior performance with a wide range of customized solutions.

customized solutions to help you achieve superior performance.

Engineer more reliably

Our highest motion control performance standards are perfectly matched to your application, eliminating the risk of under- or over-performing components.

eliminating the risk of under- or over-performing components. We offer reliable supply, application expertise, and personalized support that no other supplier can match.

We offer reliable supply, application expertise and personalized support that no other supplier can match. Kollmorgen gives you the confidence to bring reliable and superior solutions to the global marketplace.

Kollmorgen gives you the confidence to bring reliable and superior solutions to the global marketplace.

AKD2G Servo Drives

A powerful system that integrates SafeMotion and is simple to use

The new AKD2G servo drive introduces Kollmorgen’s Servo on a Chip™ computing engine, which can control 2 axes and up to 28 I/Os simultaneously. During development, we optimized the AKD2G for single-cable motors, resulting in a simplified design.

Flexible

“ Available as a single-axis drive or dual-axis drive

“ Modular design allows the user to customize the functionality according to the needs “ Supports a wide range of feedback devices.

“ Supports a wide range of feedback devices; SFD & HIPERFACE DSL standards; optional feedbacks include EnDat, BiSS, analog sine/cosine encoders, incremental encoders, and resolvers

“ Multiple system-optimized bus options available, including EtherCAT & FSoE and CANopen

 “ Over-voltage, over-current and over-temperature detection for increased system reliability

“ SafeMotion Monitor (SMM), SIL3/PLe, www.cniacs.com available as an option

 “ Dual channel STO per axis (up to SIL3/PLe)

“ Industry-leading power density for installation flexibility

– Fits into a 10” [25.4cm] deep control panel

Menu

Search for products

Back to Top
Product has been added to your cart