Ease of use

Increased usability

Flexible and cost-effective

Small footprint

Introduction

Power – without it, your system would not function. www.cniacs.com deltaV™ high-capacity power supplies provide you with the most efficient and reliable power solutions available.

DeltaV high-capacity power supply kits power system electronics and ffeld. This is all the power you need for your DeltaV system.

Benefits

Easy to use. DeltaV High Capacity Power Supplies provide reliable 12 V and 24 VDC power for DeltaV system power and bus ffeld power needs.

They mount easily on T-shaped DIN rails!

Increased availability. Redundant modules based on active MOSFET technology offer higher efficiency and lower voltage drop than conventional diode modules, resulting in less heat dissipation and higher system reliability.

Flexible and Cost-Effective DeltaV Bulk power supplies are flexible and cost-effective to use because of the ability to utilize external redundant modules, for example, if load sharing is required.

For example, if load sharing is required.

Models are available with and without conformal coating.

Small footprint DeltaV Bulk Power Supplies have a small, competitive footprint!

Benefits

Plug-and-play installation. Smart Switches feature a DeltaV-compatible setup that installs into the DeltaV network right out of the box.

They require no user configuration to fully support DeltaV network communications. In addition

The default configuration cannot be changed by the user, so you don’t have to worry about installing an incorrectly configured switch.

Automatic lockout prevents unauthorized network connections – Disabling unused network connections is a “best security practice” that helps you comply with plant security policies.

Disabling unused network connections is a “best security practice” that helps you comply with factory security policies.

With the switch’s built-in one-click lockout feature, you can automatically lock out all unused network ports on your system with the click of a button in the DeltaV application.

Full range of switch hardware configurations.

DeltaV network switches are available in a variety of hardware solutions. From 24-port rackmount units to fixed-port and modular field-installable switches.

DeltaV network switches are available to meet a variety of network requirements.

These switches are all you need to implement a DeltaV network.

DeltaV network switches replace currently supported Cisco and Hirschmann switches for implementing DeltaV control networks.

The VE6046. VE6047. and VE6048 DeltaV Smart switches www.cniacs.com can be used in applications that previously used Cisco switches.

The VE6041. VE6042. and VE6043 Smart Switches can be used in any application where DIN rail field mounting of switches is required.

In most cases, DeltaV network switches are a direct replacement for our existing supported managed switches.

Fully supported by Emerson. As an Emerson product, these DeltaV network switches are fully supported by Emerson.

Fully supported by Emerson. You can get full technical support, warranty support, product support, and education from our global service centers.

All provided by Emerson. In the unlikely event that your switch fails, smart switches are also included in the Rapid Module Replacement Program, so you can get a replacement quickly.

Uninterrupted control operation

Online upgradeable

Automatic commissioning

Bumperless transition

Introduction

Now you don’t have to worry about controller hardware failures interrupting your process and causing costly downtime.

With redundant controllers, your processes are automatically protected in the event of a hardware failure.

If the active controller fails, the backup controller automatically takes over, providing uninterrupted control operation without initialization or user intervention.

Switchover does not cause any interference with the ffeld output signals, so your process can continue to run uninterrupted.

Adding redundancy requires no special wiring or configuration; simply add a controller to your existing hardware.

Redundant controllers also support online upgrades of controller software and hardware. So you can upgrade MD Plus to MQ or MX online, or SD Plus to SQ online.

or SD Plus to an SQ or SX controller online without changing the configuration.

Benefits

Uninterrupted control operation. By installing redundant M-Series, S-Series, and PK controllers, you create a “safety net” that

protects your process from unexpected controller failures. In the event of a hardware failure, a backup controller is always available to keep your control and process up and running.

Online upgrades. Installing a redundant DeltaV www.cniacs.com controller allows you to upgrade your DeltaV system online.

New software can be installed into the backup controller online without disrupting operations.

Once the upgrade is complete, the backup controller is automatically configured and available, allowing you to switch to the new ffrmware without interrupting your process.

Once the switchover is complete, the original active controller can be upgraded. In addition, MQ controllers can be upgraded online to MX controllers.

SQ controllers can be upgraded online to SX controllers. This ensures that your system is always ready to expand as your control strategy evolves.

Automatic commissioning. The system automatically detects, commissions, and downloads spare controllers so you can safely replace equipment.

Add redundancy online by simply installing a new 2-wide backplane with system power and MQ, MX, SQ or SX controllers.

The SZ Controller Carrier or Dual Universal Safety Carrier provides 2 slots for SZ controllers, so there is no need to add anything other than additional SZ controllers.

PK controller carriers also provide 2 slots, so simply add a PK controller to an existing carrier.

The engineering database is automatically updated and the spare controller can be activated by simply assigning and downloading a controller redundancy license, all without interrupting the process.

There are no dip switches, jumpers or addresses to assign. The backup controller automatically assigns the proper backup address and starts working, protecting your process.

Bufferless Transitions The DeltaV controller is designed for bufferless control transitions from the active controller to the standby controller.

During this time, the output channels maintain their output state until the switchover is complete and the control module begins execution.

The control module uses signal status to ensure that all I/O channels are normal before taking control action on them.

All output signals are synchronized via the I/O readback function to ensure that control calculations are made based on the current output state.

When using CHARM or DeltaV Classic I/O cards with or without Foundation™ ffeldbus devices.

This ensures an uninterrupted transfer of control during switchover.

Expandable controller

Fast assembly

Easy to use

Field-proven architecture

Designed for electronic debugging

Advanced controllers

Introduction

DeltaV™ SQ controllers provide communication and control functions and integrate with ffeld devices and other nodes on the control network.

The SX and SQ controllers offer the option of matching controller capacity to process requirements. In addition, they offer new ease-of-use features that eliminate mounting screws and speed cabinet assembly.

Control strategies and system configurations created on earlier DeltaV systems can be used with this controller.

The SQ controllers have all the features and functionality of the M-Series controllers, including support for CHARM-based electronic commissioning.

See the control software product data sheet for the control language implemented in the controller.

Advantages

Scalable Controller: The SQ controller complements www.cniacs.com the SX controller by providing a smaller controller platform at a lower price point for small to medium-sized applications:

Fast: The SQ controller supports all the features you would expect from a DeltaV system: self-addressing, automatic I/O detection. All of these features are designed to

All of these features are designed to make your projects faster – plug and play!

Redundant Architecture: SQ controllers support 1:1 redundancy for increased availability. Redundant SQ controllers can be upgraded to SX controllers online – ruggedized!

Back-end Changes: You can easily upgrade SQ controllers to SX to handle project scope changes later in the project.

Simply replace the SQ controllers with SX controllers, and all existing configurations, documentation, and hardware design will remain intact.

Fast Assembly: S-Series hardware is designed to speed project execution. Brackets snap to standard DIN rails, and controllers and S-Series I/O snap into place without the need for set screws.

Easy to Use: The controller is also easy to connect.

Simply connect the SQ to the DeltaV network and have it auto-detected by DeltaV Explorer.

Add the controller and all its I/O interfaces to the system database and all components are automatically addressed and communicated with. No dip switches or jumpers need to be set.

Field-proven architecture The SQ controller is an evolution of the DeltaV MQ controller.

The new design enhances installation and stability while still utilizing the same field-proven processor and operating system.

All S-Series I/O cards run the latest enhancements to the corresponding M-Series I/O cards and provide the same field-proven, reliable operation.

Designed for electronic tuning, the SQ controllers have highly assignable I/O functions that can be electronically dispatched using CHARMs-based functions.

The electronic dispatch I/Os can be mounted in any position for easy system design and expansion with conventional I/O subsystems.