560NMS34 – Integrated Managed Switch with 1 SDSL Port and 4 Ethernet Ports

Integrated managed Layer 2 switch

4 10/100 BaseT ports (RJ45. electrical, auto-negotiation)

1 SDSL port for copper wiring

Redundant topology via (Rapid) Spanning Tree Protocol (RSTP)

1 RS-232 port for serial protocols

Applications

The RTU component of the 560NMS34 is a managed, plug-and-play Layer 2 switch.

Provides 4 Fast Ethernet auto-negotiation with automatic MDI/X (automatic crossover detection and correction)

RJ45 ports and a two-wire SDSL port for dedicated copper. It can be used with Rack Models 560MPR01. 560MPR03. and 560SFR02.

The switch is used to distribute Ethernet within the station via the RJ45 port.

The switch is used to distribute Ethernet within the station via the RJ45 ports.The SDSL port can be used to connect to stations up to a maximum distance of 20 km (0.8 mm diameter copper cable).

The SDSL port can be used to connect stations over a maximum distance of 20 km (0.8 mm diameter copper cable). The switch provides a redundant topology via (fast) spanning tree protocol. The switch supports VLAN framing and serial data tunneling.