Archives

Patented ferroresonant technology delivers “bulletproof”

power protection, overcoming spikes, sags, surges, noise

and lightning.

Eaton-exclusive SineSense provides clean, reliable power

while conserving batteries during blackouts.

Extensive configurability options make FERRUPS the ideal

power protection solution with a wide range of voltages,

frequencies, runtimes, power cords and receptacles.

FERRUPS prevents the backfeed of harmonic currents into

building wiring which can disrupt computer operations.

Redundant power paths assure high fault-tolerance and

optimum uptime. Galvanic isolation separates input from

output, filtering line noise and surges. FERRUPS also features

precision voltage regulation with no battery discharge down to

38% below nominal (depending upon load) as well as over 80

user-programmable diagnostic and communications functions.

FERRUPS models include free Eaton Software Suite power

management software with connectivity cable and are

BestLink SNMP/Web-ready for remote management.

FERRUPS covers up to $250.000 for damage to connected

equipment resulting from a spike or surge (US and Canada

only).

Features

• Active voltage regulation converts power from almost any AC

source into computer grade power

• Eliminates harmful harmonic currents from entering a building’s

wiring, where they can disrupt computer operations

• Enhanced diagnostics initiates automatic startup and scheduled

tests on the logic board, battery and other critical systems

• Provides regulated output voltage without drawing power from

batteries keeping the batteries full charged from unexpected

blackouts

• Complete offering of LanSafe® power management software

included to ensure data integrity

• Provides investment protection with a two-year limited warranty

and a $250.000 load protection guarantee (US and Canada)

Eaton® FERRUPS® uninterruptible power systems furnish

unmatched reliability in configurable power protection for

computers and telecommunications equipment.

Protect Mode

The Eaton XP-503 family of products has a unique and

exclusive Protect Mode feature that safeguards the integrity

of files stored on the Ce: drive of your operating system.

This feature ensures that data and operating system files

cannot be modified by anyone or corrupted by unexpected

power disruptions. As a result, you can be confident that

the XP-503 meets your rigorous industrial environmental

requirements and can be protected against all unauthorized

alterations.

For more details on the operation of Protect Mode, consult

the XP-503 OS Windows Embedded information manual.

Creating a Backup/Restore Point for Your XP System

It is strongly recommended that the user back up the XP’s

operating system after the unit is received, powered up, and

placed in Protect Mode. This is so that in the unlikely event

of an unintentional corruption of the operating system, the

user will be able to recover the unit to its original factory

settings. Under the Start menu’s Maintenance folder are

utilities to back up and restore the XP unit and to create a

system repair disk and system image.

Windows Standard Embedded 7 User’s Guide for Eaton

XP-503 with Visual Designer

Introduction

The Eaton XP-503 family is made up of high performance

yet cost-effective, wide-screen, multi-touch operator

interface (OI) products. The XP-503 family carries on Eaton’s

operator interface tradition of high performance balanced

with ease of use. The XP-503 family sets the standard for

hybrid OI systems by combining the flexibility of Microsoft

Windows Standard Embedded 7 operating system with

the stability and reliability achieved through a solid-state

hardware design and Eaton’s exclusive Protect Mode

feature that provides protection for unwanted changes to

the operating system and software.

The XP-503 family provides the performance and flexibility

of PC-based operator interfaces without the associated

complexity and maintenance of a PC on the plant floor.

With integrated high-speed Ethernet ports, serial ports,

USB ports, DVI-output, and removable C-Fast solid-state

memory, the XP-503 models can be adapted for a wide

variety of user requirements.

The XP-503 family of products configured with the Visual

Designer software provides a range of solutions from

basic operator monitor and control functions to full SCADA

software capabilities with built-in Web Serving.

Whether replacing hard-wired pilot devices and pushbuttons

or providing machine control and high-end SCADA functions,

the XP-503 will suit a wide range of user requirements.

The remainder of this document describes some of the

operating system features of the XP-503 system.

Application Description

Eaton’s Cutler-Hammer FP-4000 Feeder Protection Relay provides

complete 3-phase and ground overcurrent and voltage protection

plus metering. It may be used as primary protection on feeders, mains

and tie circuit breaker applications, and as backup protection for trans

formers, high voltage lines and differential protection. The relay is most

commonly used on medium voltage switchgear applications.

The FP-4000 takes full advantage of its microprocessor technology,

providing the user new freedoms and a wealth of data-gathering

features. The relay performs self-checking of all major hardware and

firmware protection elements to ensure their operation in the event of

a system or component electrical failure or fault. Protection functions

are well suited for main and distribution feeder circuit applications.

Programmable logic control functions make the FP-4000 relay ideally

suited for main-tie-main and main 1/main 2 transfer schemes.

The zone interlocking feature can be utilized for bus protection instead

of an expensive and complicated bus differential (87B) scheme.

The FP-4000 works directly with the Cutler-Hammer Digitrip 3000

and Digitrip MV relays. New breaker failure logic provides faster

remote backup clearing times for stuck breaker operation.

The FP-4000 provides trip and close circuit monitoring and alarming

features. It continually monitors the complete trip and close circuits

for continuity and readiness to trip. Open and close pushbuttons are

conveniently located on the front of the relay for local breaker operation.

Loss-of-vacuum monitoring is activated when the breaker is open.

Residual current is monitored and alarmed if detected.

When an electrical fault or disturbance occurs, the FP-4000 begins

to store the following in non-volatile memory:

• Voltage and current sampled data.

• Calculated values.

• Status of internal protection functions, logic, contact inputs and

outputs.

Retrieval and viewing of the data is easy, aiding in the quick analysis

and restoration of your electric power system.

FP-4000 Product Description

• Microprocessor-based protection with monitoring and control for

medium voltage main and feeder breakers.

• Current, voltage and frequency protection for electric power

distribution systems.

• Complete metering of voltage, currents, power, energy,

minimum/maximum and demand functions.

• Programmable logic control functions for main-tie-main

transfer schemes.

• Trip logs, event logs and waveform capture for better fault analysis

and system restoration.

• Data Logger to provide energy usage profiles for better planning,

utilization and energy usage.

• Fixed case design.

• Meets ANSI and UL standards.

When the FP-4000 isn’t responding to disturbances in the power

system, it’s providing valuable metering information at the relay and

remotely. It provides energy usage and demand reading, and can

alarm when usage reaches a set value. Power factor measurements

can be used for cap bank switching to control kvar demand.

Onboard data trending can provide load profiles for up to 40 days.

The protection functions are listed below and shown in Figure 1.

The FP-4000 provides phase overcurrent:

• Two-stage instantaneous with timers (50P-1 and 50P-2).

• Inverse time overcurrent (51P-1).

• 10 standard curves.

• Instantaneous or time delay reset.