Category: CTI

Features

• I/O configuration of 2DIO / 4UAI / 2AI

• RJ45 Ethernet port

• RS232/485 serial port for communications with Modbus devices

• Connects to CTI and legacy Siemens® /TI CPUs over Ethernet

• Several models with differing I/O capabilities allow you to customize the

solution to your needs

• Extensive intelligent features for processing attached I/O signals:

– Totalization, filtering, forcing, inversion, runtime, and counting on digital

inputs

– Frequency out (with PWM) and synchronization on digital outputs

– Filtering, averaging, scaling and totalization on analog inputs

– Data logging and trending

The 2500S family of Slice I/O modules expands the capability of

2500 Series® Systems to include small drops of I/O connected

over Ethernet. Slice I/O modules communicate to 2500 Series®

Processors using CAMP protocol and read/write directly to the PLC

memory or I/O image table. This allows transparent integration

into the 2500 Series® system without the requirement for any

complicated configuration step. Ethernet connection to the CPU

can be accomplished using the on-board port on 2500-Cxxx

Processors, or using a 2572 / 2572-A Ethernet module. 

Note that when using 2572 or 2572-A modules, Slice I/O can be

connected even to legacy Siemens® and Texas Instruments PLCs.

Several models of Slice I/O are available with different mixes of I/O

and with additional communications options including RS232/485

and 900MHz radio. Slice I/O modules feature Universal Analog Inputs

which allow connection of 0-5V, 0-20mA, thermocouple, and RTD

sensors. All Slice I/O modules can also be configured to communicate

over Ethernet using Modbus-TCP.

Note: This unit is designed to work on a battery so +12VDC is operating

voltage, not +24VDC.

Features

• I/O configuration of 8DIO / 2UAI

• RJ45 Ethernet port

• RS232/485 serial port for communications with Modbus devices

• Connects to CTI and legacy Siemens® /TI CPUs over Ethernet

• Several models with differing I/O capabilities allow you to customize

the solution to your needs

• Extensive intelligent features for processing attached I/O signals:

– Totalization, filtering, forcing, inversion, runtime, and counting on

digital inputs

– Frequency out (with PWM) and synchronization on digital outputs

– Filtering, averaging, scaling and totalization on analog inputs

– Data logging and trending

• All module configuration done using a simple web browser interface

• Wide –40°C to +70°C operating temperature range

The 2500S family of Slice I/O modules expands the capability of

2500 Series® Systems to include small drops of I/O connected

over Ethernet. Slice I/O modules communicate to 2500 Series®

Processors using CAMP protocol and read/write directly to the

PLC memory or I/O image table.

This allows transparent integration into the 2500 Series® system

without the requirement for any complicated configuration step.

Ethernet connection to the CPU can be accomplished using the

on-board port on 2500-Cxxx Processors, or using a 2572 / 2572-A

Ethernet module. Note that when using 2572 or 2572-A modules,

Slice I/O can be connected even to legacy Siemens® and Texas

Instruments PLCs.

Several models of Slice I/O are available with different mixes of I/O

and with additional communications options including RS232/485

and 900MHz radio. Slice I/O modules feature Universal Analog Inputs

which allow connection of 0-5V, 0-20mA, thermocouple, and RTD

sensors. All Slice I/O modules can also be configured to communicate

over Ethernet using Modbus-TCP.

Note: This unit is designed to work on a battery so +12VDC is operating

voltage, not +24VDC.

Features

• I/O configuration of 4DI / 4DO / 2UAI / 2AO

• RJ45 Ethernet port

• RS232/485 serial port for communications with Modbus devices

• Connects to CTI and legacy Siemens® /TI CPUs over Ethernet

• Several models with differing I/O capabilities allow you to customize

the solution to your needs

• Extensive intelligent features for processing attached I/O signals:

– Totalization, filtering, forcing, inversion, runtime, and counting on

digital inputs

– Frequency out (with PWM) and synchronization on digital outputs

– Filtering, averaging, scaling and totalization on analog inputs

– Data logging and trending

• All module configuration done using a simple web browser interface

• Wide –40°C to +70°C operating temperature range

The 2500S family of Slice I/O modules expands the capability of

2500 Series® Systems to include small drops of I/O connected

over Ethernet. Slice I/O modules communicate to 2500 Series®

Processors using CAMP protocol and read/write directly to the

PLC memory or I/O image table.

This allows transparent integration into the 2500 Series® system

without the requirement for any complicated configuration step.

 Ethernet connection to the CPU can be accomplished using the

on-board port on 2500-Cxxx Processors, or using a 2572 / 2572-A

Ethernet module. Note that when using 2572 or 2572-A modules,

Slice I/O can be connected even to legacy Siemens® and Texas

Instruments PLCs.

Several models of Slice I/O are available with different mixes of

I/O and with additional communications options including RS232

/485 and 900MHz radio. Slice I/O modules feature Universal

Analog Inputs which allow connection of 0-5V, 0-20mA,

thermocouple, and RTD sensors. All Slice I/O modules can also

be configured to communicate over Ethernet using Modbus-TCP.

Description

The 2500-RIO-B RS-485 Remote Base Controller

(RBC) allows a CTI 2500 Series or

Simatic® 505 I/O base to function as a slave

node on an RS-485 TI Remote I/O channel.

The 2500-RIO-B is intended to be a replacement for

the CTI  2500-RIO, 2500-RIO-A and Siemens® 505

6851. 505-6851-A, and 505-6851-B RBC. When

used with a 2500-R11-A base, two 2500-RIO-B

controllers can be used in a base in order to have

dual media and hardware redundancy.

Features

• Replaces CTI 2500-RIO, 2500-RIO-A and

Siemens® 505-6851. 505-6851-A, 505-6851-B

• Compatible with CTI 2500 Series® and Siemens®

SIMATIC® 505 CPUs

• Can be used in all 4. 8. 11 and 16 slot CTI and

Siemens® bases

• Compatible with 2500-R11-A and 505-6511

redundant bases

• Communication to CPU at 2Mbit/second

• Maximum cable distance from CPU to RBC 1000m

• Supports all CTI and Siemens® discrete, analog,

and special function I/O modules

• LED display for error codes and station address

• Includes RS232C port for remote programming of

PLC

Introduction

The CTI 2500-RIO-A RS485 Remote Base Controller is a member of Control

Technology’s family of I/O modules compatible with programmable controllers

from Siemens® and CTI.

The 2500-RIO-A RS485 Remote Base Controller (RBC) allows a 2500 Series™

I/O base to function as a remote base. The 2500-RIO-A is intended to be a

replacement for the Siemens® 505-6851-A RBC. It provides the following

functions:

• Compatible with CTI 2500 Series™ and Simatic® 505® CPUs.

• Can be used in currently-available CTI and Siemens® 4. 8. 11. and 16-slot

bases

• Supports communication speeds 1Mbits/sec and maximum cable distance

of 1000 meters

• LED display which shows error and status codes

• Front panel thumbwheel switch for setting the station address

• On-board RS232 port which can be used for PLC programming and

configuration.

The 2500-RIO-A resides in 2500 Series™ base. It installs in the second slot

from the left, adjacent to the power supply module. When used in a

2500-R11-A Redundant Base, two 2500-RIO-A units can be installed

in the third and fourth slots from the left, adjacent to the second power

supply.

Do not install this module into a normal I/O slot, as damage can occur.

The 2500-RIO-A RS485 Remote Base Controller allows control of a remotely-located

CTI 2500 Series® or Simatic® 505 I/O base over a twisted-pair RS485 cable up to

1000m from the CPU. IMPORTANT NOTE: 2500-RIO-A HAS BEEN MATURED.

IT IS REPLACED BY 2500-RIO-B, WHICH SHOULD BE USED ON ALL NEW DESIGNS.

Features

• Replaces Siemens® 505-6851-A and 505-6851-B with no rewiring

• Can be used in all currently available CTI and Siemens® 4. 8. 11.and 16-slot bases

• Works in 2500-R11-A and 505-6511 redundant bases to provide RBC redundancy

• Up to 15 remote bases can be attached to a CPU

• Maximum cable distance between CPU and remote base is 1000m

Files & Documents

• Product Maturity Announcement

• Product Bulletin

Description

The 2532 16-Point Form A Relay Output Module

provides sixteen Form A outputs isolated in

groups of four for the SIMATIC® 505 I/O base.

The module utilizes relay output circuits to

switch on or off external devices such as pilot

lamps, motor starters, or solenoids. The 2532 is

designed to switch externally supplied 15 to

240 VAC and 15 to 30 VDC. The internal logic

signals are isolated from the external outputs to

2100 VDC.

Features

• SIMATIC® 505 base format

• 16 Form A relay outputs

• Replaces Siemens® 505-4916 with no rewiring

• Isolated 3000 VDC group-to-group

• Isolation in groups of 4

• Wide 15-240 VAC and 15-30 VDC output range

• 4.0 Amps per output

• Individually fused outputs

• Single-wide module