Category: Honeywell

Features & Benefits:

• Can be used as an access point or client thanks to Wi-Fi connectivity

• Easily access the licenses and stations needed to replace bad hardware

controllers on your Micro SD card

• Flexible capacitive licensing allows for competitive pricing

• 1 GHz processor with 1 GB RAM and 4 GB flash storage means faster

processing and more space

• USB flash drive backs up and stores stations

• Part numbers are now based on devices and points instead of resources

• Includes standard drivers (BACnet®, LON, Modbus, SNMP, and KNX)

Certifications:

• UL 916

• CE EN 61326-1

• FCC Part 15 Subpart B, Class B

• FCC Part 15 Subpart C

• C-UL listed to Canadian Standards Association (CSA)

• C22.2 No. 205-M1983 “Signal Equipment”

• 1999/5/EC R&TTE Directive

• CCC

• SRRC

• RSS

• RoHS

ALL-IN-ONE

• Freely programmable in WEBs-N4.

• Compact design for small enclosures and easy to install on round ducts.

• Color-coded, removable terminal blocks to simplify wiring

and replacement.

• Real-time clock, a supercapacitor for 24-hour data retention.

• 24 VAC power supply.

• 20 VDC at 75 mA auxiliary supply for field devices.

• Seven universal inputs/outputs usable as analog voltage/current

output or as a universal/binary input.

• All UI can be used for pulse input.

Maximum frequency 100 Hz, Minimum duty cycle (50 % / 50 %) 5

ms ON / 5 ms OFF.

• Five 24 VAC solid state relay outputs with 1.5 A continuous and 3.5

A in rush for 100 ms per SSR output.

• Features a non-isolated RS-485 interface for Modbus communication.

ACTUATOR

• Integrated 44 in-lbs (5 Nm) actuator with 90 sec runtime at 60 Hz

(108 sec at 50 Hz) with position feedback.

PRESSURE SENSOR

• Field replaceable differential pressure sensor (± 500 Pa; accuracy

+/- 3 % of full range).

MOBILE APPLICATION

Mobile app for VAV balancing with easy access to the controller via

Bluetooth integrated in the controller.

• Easy pairing without the need to open the ceiling.

• Supports Android and iOS.

• Language support: English, French, Spanish, German, Italian.

• Wireless signal strength indication.

• Password protection

• Supports different types of balancing (min/max, set-point).

• Command individual / group of VAV, e.g. open a group of VAV dampers.

• Provides a report on balancing activities.

Honeywell’s Spyder™ Model 7 VAV controller is a programmable

room controller with integrated actuator and air flow sensor.

As a freely programmable VAV controller with universal inputs

and outputs, Spyder™ Model 7 has configuration flexibility to

achieve a variety of specific applications. Smart engineering and

commissioning tools with Niagara WEBs-N4 workbench and a

mobile application for test and balance make installation cost

effective.

Spyder™ Model 7 offers BACnet IP or BACnet MSTP, Sylk™ bus

technology, Modbus RTU RS-485. flexible universal input / output

(UIO) points and solid-state relays.

MOBILE APPLICATION

Mobile app for VAV balancing with easy access to the controller via

Bluetooth integrated in the controller.

• Easy pairing without the need to open the ceiling.

• Supports Android and iOS.

• Language support: English, French, Spanish, German, Italian.

• Wireless signal strength indication.

• Password protection

• Supports different types of balancing (min/max, set-point).

• Command individual / group of VAV, e.g. open a group of VAV dampers.

• Provides a report on balancing activities.

Description

PVBxxxxAS-E is provided with more compact size and

accurate air flow measurement to meet the control of

the increasing demand for VAV terminals. It

communicates with BACnet MS/TP, fully compatible

with Niagara WEBs AX and WEBs N4 system.

PVBxxxxAS-E is a free programmable VAV controller,

assembled with a DP sensor for air-flow measurement

and a damper actuator for damper position adjustment.

Features

• Compact design to meet small enclosure

• Low air speed measureable by high accuracy DP sensor

• 5 Nm damper actuator, ease and stable to mount

with damper of VAVBox

• BACnet MS/TP communication between

controllers, up to 115. 2 kps

• Sylk™ Bus communication with wall module,

polarity insensitive wiring for both power supple

and communication

• Compatible with Niagara AX or N4

• Colorful and removable terminal blocks to simplify

wiring and replacement

• Qualified CE, UL, BTL

• BACnet qualified by BTL

EFFICIENCY AND SAFETY ON SITE

• ISA/IEC 62443-4-2 Security Level 2 Certified Component supporting cyber security best practice

• Multi-color LEDs to show the operational status of the isolated RS-485 communications, HMI

device, Ethernet connection, and Service state of the controller.

• Built-in advanced diagnostics software facilitating troubleshooting for IP and MS/TP devices.

• Protective end covers to protect the touch flakes.

• Ferroelectric RAM (FRAM) to store the live data for the controller, including storing the last known

values when power is removed.

• UTF-8 and UCS-2 character encoding formats are supported.

• Ubuntu Core OS with snap container based modular software design (Cyber Secure).

• Supports 802.1x network authentication protocol as a Client (supplicant). Requires Niagara

N4.12 or later. Providing an IT standard security authentication method for network access.

• Processor featuring Neural Net Accelerator for future development of low latency AI/ML

algorithms at the Edge.

EASY UPGRADE

• All RS-485 ports support Panel Bus, BACnet™ MS/TP, Modbus RTU, and M-Bus.

• Removable terminal blocks with screw (factory installed) or Push-in terminals.

• Built-in Web server with HTML5 to support graphics.

FEATURES AND HIGHLIGHTS

SIMPLE AND FLEXIBLE

ENGINEERING

• N-ADV-112-H, N-ADV-133-H, N-ADV 134-H controllers have multiple RS-485 ports and Ethernet ports – one isolated

IP port and multiple switched IP ports. Refer to the “Ordering Information” on page 2.

• N-ADV-133-H-BW series controller has three RS-485 ports and four Ethernet ports – one isolated IP port, three

switched IP ports with Bluetooth™, and Wi-Fi communication.

• RJ11 port to connect with an HMI device for field operations.

• Touch flakes to support RS-485 IO module devices.

• The multiple switched IP ports on the 133 & 134 models support both Daisy chain operation and RSTP

(Rapid Span Tree Protocol) which allows a fault tolerant network to be created.

• Built-in RSTP switch (Rapid Span Tree Protocol) allowing loop-free forwarding network topology.

• i.MX 8M Plus, quad Arm® Cortex®-A53 processor, long life industrial grade, Frequency: 1.2 GHz.

• Supports BACnet™/SC configuration within the Niagara Framework®.

• Conforms to BACnet™ Standard ANSI/ASHRAE 135 protocol version 1.15 (ISO 16484-5).

EFFICIENCY AND SAFETY ON SITE

• ISA/IEC 62443-4-2 Security Level 2 Certified Component supporting cyber security best practice

• Multi-color LEDs to show the operational status of the isolated RS-485 communications, HMI

device, Ethernet connection, and Service state of the controller.

• Built-in advanced diagnostics software facilitating troubleshooting for IP and MS/TP devices.

• Protective end covers to protect the touch flakes.

• Ferroelectric RAM (FRAM) to store the live data for the controller, including storing the last known

values when power is removed.

• UTF-8 and UCS-2 character encoding formats are supported.

• Ubuntu Core OS with snap container based modular software design (Cyber Secure).

• Supports 802.1x network authentication protocol as a Client (supplicant). Requires Niagara

N4.12 or later. Providing an IT standard security authentication method for network access.

• Processor featuring Neural Net Accelerator for future development of low latency AI/ML

algorithms at the Edge.

The Advanced controllers are a family of next generation integration & plant controllers incorporating the Niagara

Framework® & powered by an IMX8 64bit quad-core processor. The Advanced controllers are freely programmable

IP devices, with a dedicated suite of IO modules providing extremely flexible control options. Using the power of

Niagara Framework® they provide both Ethernet & Serial integration options and are native profile BACnet™ Building

Controllers (“B-BC”). The Advanced controller is an ISA/IEC 62443-4-2 SL2 Certified Component device ensuring the

device supports cyber security best practice.

The N-ADV-133-H-BWA, N-ADV-133-H-BWE, N-ADV-133-H-BWW, N-ADV-133-H, N-ADV-134-H, and N-ADV

112-H Advanced controllers are designed for a wide variety of complex applications. These devices feature RS-485

ports for BACnet™ MS/TP, Panel Bus, Modbus RTU, M-Bus, and IO module devices, Ethernet ports for BACnet™

IP devices, and a RJ11 port interface for HMI devices. These controllers also have touch flakes to connect with

multiple IOs in series and a USB Type-C interface port to connect with a computer for serial communication. These

controllers can be mounted on either a DIN rail or on the wall in either horizontally or vertically orientations.

ACTUATOR

• Integrated 44 in-lbs. (5 Nm) actuator with 90 sec runtime at 60 Hz  (108 sec at

50 Hz) with analog position feedback.

PRESSURE SENSOR

• Field replaceable differential pressure sensor (± 500 Pa; span accuracy 3 % of reading).

MOBILE APPLICATION

Free to use mobile app for VAV balancing with easy access to the controller via

Bluetooth integrated in the controller.

• Easy pairing without the need to open the ceiling.

• Supports Android and iOS.

• Language support: English, French, Spanish, German, Italian.

• Wireless signal strength indication.

• Password protection

• Supports different types of balancing (min/max, set point).

• Command individual/group of VAVs, e.g., open a group of VAV dampers.

• Provides a report on balancing activities 

ALL-IN-ONE

• Freely programmable in Honeywell Optimizer Workbench.

• Compact design for small enclosures and easy to install on round

and square ducts.

• Color-coded, removable terminal blocks to simplify wiring and replacement.

• Real-time clock, a supercapacitor for 24 hours data retention.

• 24 VAC power supply.

• 20 VDC at 75 mA auxiliary supply for field devices.

• 7 universal inputs/outputs usable as analog voltage/current output

or as a universal/binary input.

• All UI can be used for pulse input. Maximum frequency 100 Hz

Minimum duty cycle (50 % / 50 %) 5 ms ON / 5 ms OFF.

• RJ45 and twisted pair T1L available as IP Ethernet communication standards.

• Possibility to reuse installed wiring as IP (T1L) uses two-core twisted

pair cables with screw terminals.

• Supports fail-safe daisy chains (IP T1L only) over distances of up to 3.281 feet

(1.000 meters) at a standard speed of 10 Mbps, significantly higher than

the standard CAT5/6 distances.

• Five 24 VAC solid state relay outputs with 1.5 A continuous and 3.5 A in-rush

for 0.1 seconds (100 ms) per SSR output.

• Features a non-isolated RS-485 interface for Modbus RTU communication.

Maximum eight Modbus devices.

• Maximum 155 read or write data points for all the Modbus devices per controller.

• Maximum six high-priority registers per controller.