Category: Prosoft

Features

 802.11n MIMO & Channel bonding supports demanding wireless applications

such as Ethernet I/O and high-resolution video

 EtherNet/IP™-or Modbus®-based PLCs/PACs can use message instructions to

read diagnostic information from the radios,

helping to reduce down time when troubleshooting wireless network problems

 802.11i, WPA-2 Personal/Enterprise using 128-bit AES encryption ensures secure

networking

 RADIUS security ensures secure networking with advanced authentication and

encryption

 Virtual Local Area Networks (VLAN) allow for secure network segmentation

 Quality of Service (QoS) provides data prioritization for I/O control devices,

video, data, etc.

 Ultra-Fast Roaming (under 10 ms) maintains seamless, high-speed connections

to one or more devices on moving equipment

and machines (such as cranes, AGVs, and carriers) as they travel between access

points

 IGMP Snooping and Packet Filtering optimizes UDP multicast traffic for superior

EtherNet/IP I/O communications

 Supports the ability to communicate with multiple Ethernet devices when used

with existing third-party wireless infrastructures

 Supports AeroScout RTLS (real-time location services) tagging by passing signals

from tags to the network

 Supports Power over Ethernet (PoE) to reduce cabling costs

 Connect serial networks (Modbus, DNP 3. etc.) over 802.11 wireless networks

 Supports SNMP

 Simple local and remote configuration, monitoring, and wireless network diagnostics

The ProSoft Technology Weatherproof IP67 Fast Industrial Hotspot (RLX2-IHNF-W)

is designed for harsh environments and features an IP66/67 rating. It is water-tight

for use in extreme weather applications such as offshore oil rigs, and dust-tight for

use in mining applications. It operates in the 2.4 or 5 GHz bands, including DFS

channels, and is good for applications up to 2 mi. / 3.2 km.

The Hotspot supports Access Point, Repeater, and Client modes. The 802.11n

technology delivers fast data rates up to 300 Mbps. This provides excellent packet

per-second performance and robust communications in rugged industrial

environments. The 802.11n MIMO & Channel bonding supports demanding

wireless applications such as Ethernet I/O and high-resolution video.

The included IH Browser configuration and monitoring software allows the user to

view network topology, assign IP addresses, monitor network diagnostics, and

update radio firmware. The optional OPC Diagnostic Server is ideal for managing

long-range wireless SCADA networks.

Key Features:

• Expands the usable applications for DeviceNet, J1939. SDS, and other CAN V2.0.

• Part A and Part B compatible CAN bus systems

• Enables the creation of star, tree and other non-linear network topologies which

increases flexibility in system design and reduces installation costs

• Works with both trunk lines and drop lines

• Allows operation at higher speeds for specific distances

• Operates at 9.6K to 1M fixed baud for J1939 or CAN networks

• Auto-detects baud rate on DeviceNet (125k, 250k, or 500k baud)

• Isolates the two sections of the CAN bus (copper wire)

• Extender operation is transparent to Master and Slave devices

• Powered from the CAN bus network

• Pluggable 5-pin DeviceNet connections (WRC-CANX-DIN-DN)

• Sealed NEMA-4X enclosure (WRC-CANX-NEM-DN)

• Standard round, mini-style connector with male pins for copper cable

(WRC-CANX-NEM-DN)

• Standard CAN chips manage CAN bus error detection and handle message

bus arbitration

• Less than 900 µsec latency

• Termination resistor built in on the CAN bus interfaces

WRC CAN bus Extenders boost signal levels, allowing longer cable lengths, longer trunk lines,

and longer drop lines without sacrificing network speed.  CAN bus Extenders permit maximum

network speed and throughput on CAN, J1939. or DeviceNet network devices, resulting in

better control of the process.  In addition extenders require no configuration when used in

DeviceNet applications as they are configured for autobaud operation.

Series IV Enhancements include:

• Expanded DIP switch settings allow selection for CAN bus speeds up to 1M baud

• Made enhancements to allow for adding Custom baud rates in the future

Key Features:

• Expands the usable applications for DeviceNet, J1939. SDS, and other CAN

V2.0. Part A and Part B compatible CAN bus systems

• Enables the creation of star, tree and other non-linear network topologies which

increases flexibility in system design and reduces installation costs

• Works with both trunk lines and drop lines

• Allows operation at higher speeds for specific distances

• Fiber-optics provide superior electrical interference protection versus copper cables

• Operates at 9.6K to 1M fixed baud for J1939 or CAN bus networks

• Auto-detects baud rate on DeviceNet (125k, 250k, or 500k baud)

• Isolates the two sections of the CAN bus (copper wire)

• Extender operation is transparent to Master and Slave devices

• Powered from the CAN bus network

• Sealed NEMA-4X enclosure

• Standard round, mini-style connector with male pins for copper cable

• Standard Fiber Optic ST female connector for use with multi-mode or single mode fiber

• Standard CAN chips manage CAN bus error detection and handle message bus arbitration

• Less than 900 µsec latency

• Termination resistor built in on the CAN bus interfaces

• Two identical WRC-CANR-DF units are included in an order kit and both are required for each application

WRC CAN bus Extenders boost signal levels, allowing longer cable lengths, longer trunk

lines, and longer drop lines without sacrificing network speed.  CAN bus Extenders permit

maximum network speed and throughput on CAN, J1939. or DeviceNet network devices,

resulting in better control of the process.  In addition extenders require no configuration

when used in DeviceNet applications as they are configured for autobaud operation.

Series IV CANR Enhancements include:

• Up to 12km fiber lengths

• CAN 2A, CAN 2B, and remote frame support

• Expanded DIP switch settings allow selection for CAN bus speeds up to 1M baud

• Enhanced autobaud operation

• Either unit in a pair can Autobaud from the other units defined baud rate

• Improved Reverse voltage protection and CAN line noise immunity

• Increased message internal buffers – Automatic Memory Technology (AMT) operation

• Eliminates the distinction between WRC’s earlier version Type 1 and Type 2 CANR

ProSoft Technology’s Modbus® TCP/IP to Modbus® Serial communication gateway

allows high-speed bi-directional data transfers between Modbus® TCP/IP-enabled

PACs and Modbus® Serial devices. Modbus® Serial devices are widely used in nearly

every industry and include SCADA systems and Power Monitors.

In addition, the gateway has several features that allow simplified integration, reduced

commissioning time and optimized performance.

Features

 Supports up to 20 simultaneous client & server connections, allowing for faster

communication between devices such as HMIs,

SCADA systems, power monitors and flow computers, among others.

 Includes a SD card slot (SD card optional) for storing configuration files.

This can be used for disaster recovery.

 ProSoft Discovery Service: This utility allows your PC to see the gateway and

change its default IP address without being on the

same subnet.

 Secure module configuration via module switch (v1.04 and greater).

 Up to 10.000 16-bit registers can be used to exchange large amounts of data.

ProSoft Technology’s Modbus® TCP/IP to Modbus® Serial four-port Serial gateway

allows high-speed bi-directional data transfers between Modbus® TCP/IP-enabled

PACs and Modbus® Serial devices. Modbus® Serial devices are widely used in nearly

every industry and include SCADA systems and Power Monitors. Four Serial ports

allow for connectivity of up to 400 Modbus® Serial devices, reducing the amount of

gateways required for your application.

In addition, the gateway includes several features that allow for simplified integration,

reduced commissioning time and optimized performance.

Features

 Gateway includes a SD card slot (SD card optional) for storing configuration files.

This can be used for disaster recovery.

 Four Serial ports allow for connectivity of up to 400 Modbus® Serial devices, 

reducing the amount of gateways required for your

application.

 Supports up to 20 simultaneous client & server connections, allowing for faster

communication between devices such as HMIs,

SCADA systems, power monitors and flow computers, among others.

 ProSoft Discovery Service: This utility allows your PC to see the gateway and change

its default IP address without being on the

same subnet as the module.

 Secure module configuration via module switch (v1.04 and greater).

 Up to 10.000 16-bit registers can be used to exchange large amounts of data.

ProSoft Technology’s EtherNet/IP™ to Modbus® TCP/IP communication

gateway allows high-speed bi-directional data transfers between

Rockwell Automation® PACs and Schneider Electric® PACs. Our

Modbus® TCP/IP driver features multiple client and server functionality,

for faster data transmission. Two separate Ethernet ports allow each

protocol to reside on separate subnets, allowing you to pass data

between the two subnets without changing each device’s IP address.

In addition, the gateway includes an embedded EDS Add-On Profile,

allowing for simplified integration and reduced commissioning time.

Features

 Two separate Ethernet ports allow each protocol to reside on separate

subnets. This allows you to pass data between the two

subnets without changing each device’s IP address to be on the same subnet.

 Data prioritization: Multiple I/O connections allow you to set RPIs for status

and/or control data.

 Includes an embedded EDS Add-On Profile, allowing for simplified integration

and reduced commissioning time.

 Gateway includes a SD card slot (SD card optional) for storing configuration

files. This can be used for disaster recovery.

 Secure module configuration via module switch (v1.04 and greater).

 Up to 10.000 16-bit registers can be used to exchange large amounts of data.

ProSoft Technology’s EtherNet/IP™ to Siemens® Industrial Ethernet

communication gateway allows high-speed bi-directional data transfers

between Rockwell Automation® PACs and Siemens® S7 PACs. Two

separate Ethernet ports allow each protocol to reside on separate

subnets, allowing you to pass data between the two subnets without

changing each device’s IP address.

In addition, the gateway includes an embedded EDS Add-On Profile,

allowing for simplified integration and reduced commissioning time.

Features

 Two separate Ethernet ports allow each protocol to reside on separate

subnets. This allows you to pass data between the two

subnets without changing each device’s IP address to be on the same subnet.

 Data prioritization: Multiple I/O connections allow you to set RPIs for status

and/or control data.

 Includes an embedded EDS Add-On Profile, allowing for simplified integration

and reduced commissioning time.

 Gateway includes a SD card slot (SD card optional) for storing configuration

files. This can be used for disaster recovery.

 Secure module configuration via module switch (v1.04 and greater).

 Up to 10.000 16-bit registers can be used to exchange large amounts of data.