Category: Prosoft

The Modbus® TCP/IP to IEC 61850  gateway enables communication between

the Intelligent Electronic Devices (IEDs) on an IEC 61850 network and

Programmable Logic Controllers (PLCs) or Programmable Automation

Controllers (PACs) on a Modbus TCP/IP network.

The configuration utility software provided with the gateway uses IED

configuration files to import complex IEC 61850 data structures. The utility

creates Variable files and Function Block files for import into Unity Pro projects

for Quantum or M340 processors.

IEC 61850 is the international standard that defines the hardware and

communication requirements for all devices within substation automation. The

standardized naming conventions imposed by the IEC 61850 standard

improves interoperability between systems provided by diverse manufactures or

created by multiple system integrators.

Modbus TCP/IP Server

 Accepts incoming connections on Service Port 502 from Clients using Modbus

TCP/IP MBAP messages and on Service Port 2000 (or other Service Ports) from

Clients using Encapsulated Modbus messages.

 Supports up to 20 independent, concurrent server connections for any combination

of Service Port 502 MBAP messages and Encapsulated Modbus RTU messages

on other Service Points.

The Modbus® TCP/IP to PROFINET Controller Gateway allows you to

connect two giants of industrial automation through secure, high-speed

communications. The gateway provides Modbus TCP/IP-based

controllers the ability to control up to 36 PROFINET RT devices such as

field I/O, drives, HMIs, and controllers.

The PLX82-MBTCP-PNC gateways are stand-alone DIN-rail mounted

units that provide two Ethernet ports for communications, remote

configuration, and diagnostics. The onboard SD Card slot (SD card

optional) is used for storing configuration files that can be used for

recovery, transferring the configuration to another gateway, or general

configuration backup.

Features

 Isolated Ethernet ports allow devices on different protocols to be on different subnets

 PROFINET v2 certification with PROFINET class A compliance

 Field-tested with multiple PROFINET devices from multiple vendors

 Remotely view and diagnose Modbus TCP/IP and PROFINET networks

 10.000 registers of user-memory

The PLX82-EIP-PNC gateways are stand-alone DIN-rail mounted units

that provide two Ethernet ports for communications, remote configuration,

and diagnostics. The onboard SD Card slot (SD card optional) is used for

storing configuration files that can be used for recovery, transferring the

configuration to another gateway, or general configuration backup.

Features

 Multiple I/O connections allow for high-speed control for large PROFINET I/O systems

 Isolated Ethernet ports allow devices on different protocols to be on different subnets

 ODVA-approved

 PROFINET v2 certification with PROFINET class A compliance

 Field-tested with multiple PROFINET devices from multiple vendors

 Remotely view and diagnose EtherNet/IP and PROFINET networks

 Embedded EDS AOP provided to allow for seamless integration to Studio 5000 and RSLogix™ 5000

 Using EtherNet/IP I/O connections, no ladder programming is required

The EtherNet/IP™ to PROFINET Controller Gateway allows you to

connect two giants of industrial automation through secure, high-speed

communications. The gateway provides EtherNet/IP-based controllers the

ability to control up to 36 PROFINET RT devices such as field I/O, drives,

HMIs, and controllers.

The PLX82-EIP-PNC gateways are stand-alone DIN-rail mounted units

that provide two Ethernet ports for communications, remote configuration,

and diagnostics. The onboard SD Card slot (SD card optional) is used for

storing configuration files that can be used for recovery, transferring the

configuration to another gateway, or general configuration backup.

The remote connection is made through Belden Horizon. This is

Belden’s IT-secure and OT-friendly cloud-native platform for the

Industrial Internet of Things. This service can be accessed anytime,

anywhere in the world, offering the user a secure and intuitive Web

interface to monitor their automation devices in real time.

Features

• Enable / Disable remote access locally via an EtherNet/IP™ message.

• Remote Connectivity lets you access a remote network without leaving

your office.

• The network bridge does not support routing. This secures communication

is only established to the target LAN.

• Integrates with Belden Horizon, Belden’s secure, cloud-native platform for

the Industrial Internet of Things.

• EasyBridge™ secure remote access provides the easiest way to connect

PLC software to remote PLCs.

• File Relay – transfer files across segmented networks.

• Does not require additional software, increasing network security.

Tired of traveling to take care of an issue that could have been resolved

by remotely connecting to the control equipment? The PLX35-NB2

Network Bridge is the ideal solution for system integrators, machine

builders, or anyone requiring remote access to machines for

commissioning, troubleshooting, or maintenance.

Once a Network Bridge is deployed and a Belden Horizon™ account

has been created, you are ready to remotely access the automation

equipment, reducing travel and saving money.

The remote connection is made through Belden Horizon. This is

Belden’s IT-secure and OT-friendly cloud-native platform for the

Industrial Internet of Things. This service can be accessed anytime,

anywhere in the world, offering the user a secure and intuitive Web

interface to monitor their automation devices in real time.

The DF1 messaging module can be used in applications requiring DF1 to

Logix messaging. The module can be used to communicate between PC’s

or PLC’s using DF1™ or EtherNet/IP™.

Have a bunch of MicroLogix or SLC’s in your water or waste water

treatment facility? DF1 Radio Modem protocol can be used for migrating old

SLC’s and MicroLogix PLC’s to newer Logix based platforms over leased

line modems. Start migrating the legacy equipment to new Logix based

equipment with the help of ProSoft Technology’s DF1 Messaging Module.

Features

 DF1 Radio Modem with support for store and forward functions

 Intelligent routing to ControlLogix® or CompactLogix™ from PLC-5®,

SLC, MicroLogix controllers and SCADA systems

 Direct-to-tag technology simplifies data mapping, reducing configuration time

 Secure module configuration via on module switch

 Can be used in a redundant ControlLogix system

 Built-in packet analyzer for DF1 networks

Wondering what you’ll do now that Rockwell Automation has discontinued its

legacy 1761-NET-ENI module? ProSoft Technology’s DF1 Routing Module can

be used in a similar way.

The PLX51-DF1-ENI module provides EtherNet/IP connectivity for SLC™ 500.

CompactLogix™ and MicroLogix™ controllers, as well as many other DF1™

enabled devices

The module can be used for messaging between two controllers, uploading

and downloading PLC programs, modernizing HMI’s, or migrating legacy

Honeywell systems.

Features

 Intelligent routing to ControlLogix or CompactLogix from PLC-5. SLC,

MicroLogix controllers SCADA, DCS gateways and more

 Direct-to-tag technology simplifies data mapping, reducing configuration

time

 Secure module configuration via on module switch

 Can be used in a redundant ControlLogix system

 Built-in packet analyzer for DF1 networks to assist in trouble shooting

serial network issues

The Modbus TCP/IP driver features multiple, simultaneous client and server

connections for faster data transmission. For simplified integration and reduced

commissioning time for Rockwell Automation® EtherNet/IP-enabled PACs, an

EDS AOP is provided.

The highly reliable and secure OPC UA Server supports 10 simultaneous OPC

UA sessions that provide access to EtherNet/IP and Modbus TCP/IP data from

the respective networks.

Features

 Two separate Ethernet ports allow EtherNet/IP and Modbus TCP/IP to reside

on a different subnet than the OPC UA Server.

 All three protocols operate independently and simultaneously while accessing

common process data.

 Data prioritization: Multiple EtherNet/IP I/O connections allow for different

RPIs for status and/or control data.

 Includes an embedded EDS Add-On Profile, allowing for simplified integration

and reduced commissioning time.

 Gateway includes an SD card slot (SD card optional) for storing configuration

files. This can be used for disaster recovery.

Need to get data from your EtherNet/IP™ or Modbus® TCP/IP-based devices to

your OPC UA clients to be analyzed so you can reduce your operating costs or

increase your production?

ProSoft Technology’s EtherNet/IP to Modbus TCP/IP to OPC UA Server

communication gateway allows high-speed tri-directional data transfers between

EtherNet/IP PACs and Modbus TCP/IP devices, while also providing an OPC UA

Server connection.

The Modbus TCP/IP driver features multiple, simultaneous client and server

connections for faster data transmission. For simplified integration and reduced

commissioning time for Rockwell Automation® EtherNet/IP-enabled PACs, an

EDS AOP is provided.

The highly reliable and secure OPC UA Server supports 10 simultaneous OPC

UA sessions that provide access to EtherNet/IP and Modbus TCP/IP data from

the respective networks.