Power supply modules type PSI135 feed the backplane

and the internal supply sections of plugged modules. The

integrated galvanic isolation decouples disturbances and

separates supply groups strictly. Up to 4 PSI135 modules

can be operated simultaneously on one backplane, providing

supply redundancy in the event of a primary supply

or infrastructure failure. The remaining load is distributed

evenly on the unaffected modules. The devices measure all

relevant quantities of supply and load circuit automatically,

aggregate them to meaningful diagnostic information on

the application interface as well as visual indication.

Features

● 35 W rated power output at Ta = -30 °C to +70 °C

● Buffering for failure according to IEC 61131-2 PS2,

logging

● Galvanic isolation of 850 V AC, rms to the system

● Supply redundancy due to multiple power feeds

● Measurement of supply and load circuit

● Extended diagnostics and load aggregation

● Eventlog power fail safe

Empty slots on backplanes are useful for optional retrofits,

machine variants or for keeping reserve space in plant con

struction. The BPC101 backplane slot cover protects each

slot from mechanical influences, electrostatic discharge

and contamination. BPC101 can be fitted both between

mounted modules as well as mounted side by side. In both

cases the achieved degree of protection is IP40.

Features

● M100 system backplane slot cover for 1 slot

● Compatible with BPR1nn and BPS1nn backplanes

● Direct side by side mounting or between modules

● Can be used for any slot (except 0/C)

● Screw mounting

● Captive screw

● Degree of protection IP40

Die Busschiene vereint den Buskoppler und die I/O-Module

zu einer mechanisch robusten, EMV-sicheren Einheit. Voll

ständige I/O-Stationen können somit nach der Montage

vorgetestet und ohne weitere Veränderung in die Anwen

dung übernommen werden. Der Aufbau ermöglicht Tausch

und Nachrüstung einzelner Module ohne Demontage der

nicht betroffenen Module.

Die Busschiene ermöglicht die Echtzeitdatenkommunika

tion zwischen den Modulen und dem Buskoppler, versorgt

die Logikseite der Module mit Energie und ermöglicht die

Modul-zu-Modulkommunikation.

Die Befestigung mit massiven M5-Schrauben macht diese

Variante prädestiniert für Umgebungen mit hohen Schock

und Vibrationsbelastungen. Der solide Metallkörper und

die große rückseitige Montagefläche bieten eine hohe Wär

meableitung an die Tragkonstruktion, was die thermischen

Reserven bei Anwendungen mit hohen Umgebungstempe

raturen erhöht.

Features

● Busschiene System M100 für Schraubmontage

● 4 bis 32 Steckplätze

● Mechanisch robuste, selbsttragende Basis für Module

● Modultausch ohne Demontage anderer Module

● Ermöglicht vollständige Vormontage und Test

● Beliebige Steckplätze als Reserven möglich (Lücken)

● Verstärkte Wärmeabfuhr über rückseitige Montage

fläche

The backplane combines the node adapter and the I/O

modules into a mechanically robust EMC compliant unit.

Fully assembled I/O stations can thus be pre-tested after

mounting and transferred to the application without fur

ther modification. This assembly enables individual mod

ules to be exchanged and retrofitted without having to

remove the unaffected modules.

The backplane enables real-time communication between

modules as well as with the node adapter, provides the

power supply to the logic side of the modules and enables

module-to-module communication.

Fastening with solid M5 screws makes this variant ideal for

environments that are exposed to high shock and vibration

loads. The solid metal body and large mounting area on the

rear allow high heat dissipation to the support structure.

This increases thermal reserves for applications involving

high ambient temperatures.

Features

● M100 system backplane for screw mounting

● 4 to 32 slots

● Mechanically robust, self-supporting base for modules

● Module exchange without the removal of other mod

ules

● Enables complete pre-assembly and testing

● Any slots possible as reserve (gaps)

● Enhanced heat dissipation via rear mounting surface

Die Busschiene vereint den Buskoppler und die I/O-Module

zu einer mechanisch robusten, EMV-sicheren Einheit, die

sich mit einem Handgriff auf einer normkonformen Trag

schiene aufsetzen und auch wieder abnehmen lässt. Voll

ständige I/O-Stationen können somit nach der Montage

vorgetestet und ohne weitere Veränderung in die Anwen

dung übernommen werden. Der Aufbau ermöglicht Tausch

und Nachrüstung einzelner Module ohne Demontage der

nicht betroffenen Module.

Die Busschiene ermöglicht die Echtzeitdatenkommunika

tion zwischen den Modulen und dem Buskoppler, versorgt

die Logikseite der Module mit Energie und ermöglicht die

Modul-zu-Modulkommunikation.

Features

● Busschiene System M100 für Tragschienenmontage

● 4 bis 32 Steckplätze

● Mechanisch robuste, selbsttragende Basis für Module

● Modultausch ohne Demontage anderer Module

● Ermöglicht vollständige Vormontage und Test

● Beliebige Steckplätze als Reserven möglich (Lücken)

The backplane combines the node adapter and the I/O

modules into a mechanically robust, EMC compliant unit

that can be fitted on a standard DIN mounting rail and

also removed in an instant.

Fully assembled I/O stations can thus be pre-tested after

mounting and transferred to the application without

further modification. This assembly enables individual

modules to be exchanged and retro fitted without

having to remove the unaffected modules.

The backplane enables real-time communication between

modules as well as with the node adapter, provides the

power supply to the logic side of the modules and enables

module-to-module communication.

Features

● M100 system backplane for DIN-rail mounting

● 4 to 32 slots

● Mechanically robust, self-supporting base for modules

● Module exchange without the removal of other modules

● Enables complete pre-assembly and testing

● Any slots possible as reserve (gaps)

The backplane combines the node adapter and the I/O modules into

a mechanically robust EMC compliant unit. Fully assembled I/O stations

can thus be pre-tested after mounting and transferred to the application

without further modification. Backplanes allow for real-time communication

between modules as well as with the node adapter and provide the power

supply to the logic side of the modules.

The IP40 conform structure and the installation concept of the M100 make

it possible to mount the stations directly on or in the machine, either on a

mounting rail or through direct screw mounting. In addition, the individual

modules are bolted and they remain fixed in place, even if subjected to

vibration or shock loads.

Empty slots on backplanes are useful for optional retrofits, machine

variants or for keeping reserve space in plant construction.

The BPC101 backplane slot cover protects each slot from mechanical

influences, electrostatic discharge and contamination.

The NPN102 PROFINET RT node adapter maps the pow

erful and flexibly configurable M100 station to a standard

PROFINET interface. The operating modes of the M100

I/O modules are defined during the configuration and are

transferred to the station node during start-up.

Features

● PROFINET RT device

● Integrated 2-port switch for line cabling

● Integrated power supply unit for module supply: 20 W

● Diagnostics LEDs according to PROFINET recommendation

The NCN102 node adapter maps the powerful and flexibly

configurable M100 station to a standard CANopen inter

face. The operating modes of the M100 I/O modules are

defined during the configuration and are transferred to

the station node during start-up. The CANopen synchroni

zation features enables clock-synchronous sampling and

processing of the I/O signals.

Features

● CAN/CANopen node adapter

● Wiring on M100 standard terminal block

● Integrated termination resistor

● Address configuration: via 2 rotary switches, or via LSS

service according to CiA 305

● Baud rate setting: via rotary switches, or automatic

detection

● Synchronization: CANopen sync consumer

● Maximum process image per station: 2048 bytes

● Integrated power supply unit for module supply: 20 W

● Diagnostic LEDs according to CANopen standard

The NCN102 node adapter maps the powerful and flexibly

configurable M100 station to a standard CANopen inter

face. The operating modes of the M100 I/O modules are

defined during the configuration and are transferred to

the station node during start-up. The CANopen synchroni

zation features enables clock-synchronous sampling and

processing of the I/O signals.

Features

● CAN/CANopen node adapter

● Available with either a M100 standard terminal block or

2x 9-pin D-sub ports

● Integrated termination resistor

● Address configuration: via 2 rotary switches, or via LSS

service according to CiA 305

● Baud rate setting: via rotary switches, or automatic

detection

● Synchronization: CANopen sync consumer

● Maximum process image per station: 2048 bytes

● Integrated power supply unit for module supply: 20 W

● Diagnostic LEDs according to CANopen standard