Category: Kollmorgen

Cartridge DDR®

Our exclusive Cartridge DDR® servo motors combine the performance

advantages of a frameless motor with the ease of installation of a

full-frame motor. They feature an integrated, factory-aligned high

resolution feedback device and a unique bearingless design that couples

directly to the load, using the machine’s own bearings to support the

rotor. Most models can be installed in under five minutes.

Features

• 5 frame sizes, multiple lengths

• 230 / 400 / 480 VAC windings available (high and low)

• 4.5 to 510 N-m (3.3 lb-ft to 376 lb-ft) continuous torque accommodates

a wide range of high-power application requirements

• Speeds up to 2.500 rpm meet most medium speed and high torque

application requirements

• Power ratings from 775 to 11.700 watts meet high power demands for

most applications

• Integral sine encoder feedback provides resolution of over 134 million

counts per revolution

• Built-in thermistor provides over-temperature protection

• UL Listed for global acceptance

Benefits

• Provides the space-saving and performance advantages of a frameless

DDR motor with the ease of installation of a full-frame motor

• Integrated compression coupling and shipping hardware: eliminates parts

and labor for a faster, lower-cost machine build

• Installs in 5 minutes

• Up to 50% more torque density than comparably sized conventional servo

motors

• Direct load connection eliminates backlash, compliance and maintenance

of gearboxes, belts or pulleys

• Low cogging for smooth low-speed rotation

• Zero backlash and compliance provides more responsive system performance

• Pre-configured amplifiers and feedback devices simplify installation and startup

STF Washdown Motor – Food Grade

These permanent magnet DC (PMDC) motors are SCR-rated and

adhere to NEMA standards. They are available 90 or 180 VDC,

from 1/4 to 2 HP.

Features

• SCR Rated NEMA Standards – Washdown Duty

• NEMA C face with removable base – except the 1 and 1.5 HP

motors have welded bases

• Class H insulation

• UL Recognized (UL 1004. File E61960)

• Complies with NEMA MG1-1.26.5 Waterproof designation and IP65

• Bakery Industry Sanitation Standards Committee (BISSC) certified

per BISSC Standard 29 (Authorization No. 301)

• 1750 RPM

Built for Lightweight Versatility

The lightweight design of AKMA motors makes them easier to install and maintain, while their high

torque density in a smaller size delivers performance improvement across demanding applications

including:

• Food and beverage processing

• Pharmaceutical and medical labs

• Radar stations and antenna positioners

SFD-M

With the integrated SFD-M device providing multi-turn absolute feedback, customers can expect

positioning performance comparable to Hiperface® or EnDat® feedback—without added cost.

• Single-turn resolution of 24 bits and multi-turn resolution of 16 bits

• Energy-harvesting technology eliminates the need for battery backup cables, which eliminates

costly setbacks from unplanned downtime due to battery failure, retaining absolute positioning

information even when the system is powered down or during a power outage or shutdown

• Onboard memory enables plug-and-play parameterization of the motor to compatible Kollmorgen

drives reducing setup time and enabling faster commissioning

Features

• Four frame sizes for a wide variety of machine designs

• Designed for continuous torque from 0.5Nm to 14.5Nm with peak torque at 1.4Nm to 38Nm

• Plug-and-play compatibility with Kollmorgen controls and drives

• Meets UL, CE, RoHS, UKCA standards

• 316L Stainless steel shaft

• Stainless steel hybrid connector with integrated Viton seal supports a single cable connection

to the servo drive.

• Feedback devices include Singleturn/Multiturn Smart Feedback Device (SFD3/SFD-M);

Hiperface DSL (FS); EnDat 2.2 (FS)

Designed for harsh environments such as food and beverage processing or variable weather

applications, the lightweight AKMA servo motor delivers the performance and reliability you

need. These hard-working motors feature a cost-effective anodized aluminum coating,

and a form factor to meet your specific requirements in medium and heavy washdown

environments. For durability, cleanability, and versatility, our full line of AKMA motors is

built to perform.

Built for Durability

AKMA motors are engineered for performance and longevity in tough washdown environments

and uncertain outdoor conditions.

Unsurpassed durability starts with the motors’ hardened anodized aluminum coating that provides

strong chemical resistance in a wide pH range to withstand common cleaning agents in washdown.

You’ll find:

• Coating that is less vulnerable to scrapes, dents, and paint flaking than conventional epoxy

• Stainless-steel shaft with chromium oxide inlay maximizes lifetime of the shaft seal

• Vented design and “one-piece” housing structure eliminates the O-ring to reduce risk of water ingress

Built for Cleanability

AKMA motors are engineered for performance and longevity in tough washdown environments

and uncertain outdoor conditions.

In both food and beverage contact zones and dry clean environments, AKMA motors incorporate

critical design elements for more effective cleaning:

• Smooth surface ensures simple cleanability in environments where cleanliness is essential

• Round housing prevents contamination droplets from pooling

• IP69K-rated sealing allows higher pressure exposure for food-grade environments

Kollmorgen AKM™ Washdown and Washdown Food Series motors are available

in frame sizes 2 through 6. These innovative motors incorporate our

industry-leading AKM electromagnetics within a housing protected by a 2-K

coating and IP67-rated seal configuration. Stainless steel hardware is used on

all precision interfaces. The food-grade model incorporates greases that are

safe for incidental contact and consumption.

Features

• Frame sizes 2 through 6

• Static torques from 1 to 25 N-m

• Available with a wide range of standard lengths, windings, feedback systems

and connection technologies

• Resistant to corrosive chemicals including highly alkaline or acidic cleaning

products

• Food-grade version complies with FDA requirements, including lubricants and

materials safe for incidental contact and consumption

• IP67 seal design featuring PTFE shaft seal

• Stainless steel shaft

Benefits

• Ideal for applications subject to strict hygiene regulations

• A cost-effective solution for any application that requires periodic washdown

• Increased motor life

• Higher purification rating

• No additional cover or special protection required for the motor casing

• Meets the needs of a wide range of applications without requiring expensive,

high-grade stainless steel for the motor casing

• Stainless steel used for motor shaft, screws and connectors

New: SFD-M (Smart Feedback Device, Multi-Turn)

The SFD-M (Smart Feedback Device, Multi-Turn) is Kollmorgen’s most advanced position

feedback solution, precisely designed to integrate with the AKM servo motor.

With 24-bit resolution and 16-bit tracking over 65.536 rotations, it delivers highly accurate

multi-turn feedback for demanding industrial applications.

Its energy-harvesting, battery-free design eliminates maintenance and reduces cabling costs.

The innovative single-cable technology simplifies installation and lowers expenses.

Paired with the AKM servo motor, the SFD-M offers unmatched precision, reliability, and

efficiency for complex motion control.

Features

• 8 frame sizes, 28 frame/stack combinations

• Speeds up to 8.000 RPM

• 75 VDC; 120. 240. 480 VAC windings

• A wide variety of feedback devices, mountings and seals

• Direct mate to most Kollmorgen servo drives

• Windings are rated at 100°C rise over a 40°C ambient while using 155°C (class F)

insulation materials

• cURus, CE Compliant, UL Recognition

Our wide range of standard configurations offer the same advantages as a custom solution

With more than 500.000 standard products and practically unlimited co-engineered

modifications, selecting the right-fit motor—optimized for your specific application

requirements—has never been easier.

• Extensive choice and flexibility from a wide range of standard products and

co-engineered modifications for an exact fit to your design requirements

• Best-in-class performance, with industry-leading power density

• Exceptionally low cogging and low harmonic distortion to ensure smooth performance

• Easy to commission and use, with plug-and-play motor recognition and full-frequency

autotuning on AKD™ Series servo drives

Options

• Feedback devices: resolver, SFD, incremental and sine encoders

• Seals for improved environmental protection

• Shaft ends closed or open keyway, flat, smooth

• Dual or single Intercontec connectors, straight or rotatable

• 24 VDC fail-safe brakes

• IP67 washdown versions with food-grade greases and finishes

The Kollmorgen Essentials™ Drive provides the performance, versatility

and ease you need. It comes standard with premium capabilities, including

high-resolution multi-turn feedback and precise positioning accuracy with

synchronized positioning over Industrial Ethernet.

ABB 3BSC610023R0001 POWER SUPPLY SD812

ABB 3BHE032593R0001 Isolated Power Supply

ABB 3BHE021887R0101 UBCC717BE101 Board  3BHB002751R0102

ABB 3BHE024747R0101 GD C801 A 3BHE024748 P104

ABB XVC770BE101 3BHE021083R0101 Circuit Board

ABB 3BHE006412R0101 Circuit Board UFC762AE101

LENZ  EPL10200-W

EPZ-10203 CANPT010W3E

ICS Triplex T8270 Trusted 24 Vdc FanAssembly

Beckhoff Programmable Controller CEDIO 16/16-0.5

ABB 3BSE006503R1  PFSA140 PowerSupply Unit

ABB PFSC230 cable set 25m for DTU

SAACKE F-GDSA 143303 Controller SHIPS UPS

GE ENERGY HYDRAN H201Ci-1 One-Channel Controller

ABB 3BHB027232R0001 1-Phase Charging Transformer

ABB XZ C828 A101 Didt Dioder Snubber 3BHE039453R0101

Kollmorgen S60600 Servostar600 606-Fan 4 kVA, 6 A, 3 X 230 –  480 V

GE PCM Regulator for EX2100e Power Conversion Module 151X1235DB15SA1

BAUMULLER b maXX 3000 Servo Controller BM3401-LIFBO-ACOOOCB-G-02-O-02

Stepper positioning systems offer exceptional torque and accuracy,

with the simplicity and versatility to suit a wide range of applications.

The key to getting the most performance is to choose a high-quality

motor and pair it with the optimum stepper drive for your particular

application requirements.

Kollmorgen offers stepper motor drives with the versatility, ease-of-use

and cost-effectiveness to suit virtually any stepper positioning application.

With microstepping capabilities and no need for feedback systems,

these stepper drives offer servo-like positioning with less complexity

and a lower total cost.

Our stepper drives are available for 120/240 Vac and 20–75 Vdc power

input. With a wide output power range, they provide the features and

performance required for challenging stepper applications such as indexing,

X-Y and X-Y-Z positioning, conveying, machine tools, robotics and more.

Modular stepper drives in the P5000 Series provide a compact, cost-effective

solution for applications where an external DC power source is available.

They are generally used where the driver will be directly integrated into the

machine, or in systems where drivers for multiple axes will share a common

DC power supply.

Packaged stepper drives in the P6000 and P7000 Series incorporate their own

DC power supply along with the motor drive in a full enclosure.

These stand-alone units operate directly from the facility’s AC power, providing

motion control that’s easy to implement and configure for nearly any application.

The P7000 Series also includes auto-tuning and motion profiling for the ultimate

in functionality, smoothness, high-speed performance and innovation.