Category: Autronica

Operator controls

The panel offers the following buttons:

• More Events button for scrolling through several

alarms

• Silence Buzzer (60 dB) for silencing the internal buzzer

(access level 1). The internal buzzer will remain muted

until a new alarm is triggered

• Silence Alarm button

• Combined Reset button/Lamp Test (access level 1)

• Contrast settings: to start the contrast settings

(access level 1), press and hold the Silence Buzzer

button for 5 seconds until audible beep, observe

changes, then release the button to confirm the new

contrast (a new audible beep is heard)

Features

• User-friendly display and operator controls

• Scroll function for more alarms

• Text display suitable for full darkness operation

• On-wall mounting

• Conforms to EN 54 regulations

• Conforms to CE standards

• Designed to meet the requirement of the major

maritime classification societies

Indicators

The panel provides the following indicators:

• Fire symbol, Alarm Routing Activated, Fault, Function

Disabled, Test, System Fault, Power, More Events

• Internal buzzer

Capacity

A maximum of 8 panels can be connected to the

detection loop.

Compatibility – AutroGuard Protectors

When using AutroGuard protectors, note that

BU-110 firmware 1.6 or newer is required.

Operator controls

The panel offers the following buttons:

• More Events button for scrolling through several

alarms within the same event window

• Silence Buzzer (60 dB) for silencing the internal

buzzer. The internal buzzer will remain muted

until a new alarm or fault is triggered

• Next Window button for stepping to a new event

window, for example from Fire Alarm to Fault

Warning window

• Contrast settings: to start the contrast settings

(access level 1), press and hold the Silence

Buzzer button for 5 seconds until audible beep,

observe changes, then release the button to

confirm the new contrast (a new audible beep is

heard)

• Lamp Test button for activating all indicators

Indicators

The panel provides the following indicators:

• Fire Symbol, Alarm Routing Activated, Fault,

Function Disabled, Test, System Fault, Power,

More Events

• Internal buzzer

Description / Application

The unit has been designed for use with AutroSafe 4

Interactive Fire Detection System.

The Information Loop Panel BV-110 serves as an

indication device only. It provides information

related to the defined operation zone(s).

The panel can be configured (by means of the

configuration tool) to show detection zones and point

information in an alarm situation, or detection zones

only.

By operating the More Events Button, it is possible to

scroll through and view detailed information of the first

64 alarms (or 32 first alarms, if the panel is configured to

show both detection zones and points).

The panel can store up to 6 faults and 6

disablements. The total number of faults and

disablements in the system will always be shown,

but it is only possible to scroll through and view

detailed information of the first 6 faults and

disablements (using the More Events Button).

Compatibility – AutroGuard Protectors

When using AutroGuard protectors, note that

BV-110 firmware 1.6 or newer is required.

Features

• User-friendly display and operator controls

• Scroll function for more alarms

• Text display suitable for full darkness operation

• Displays alarms, faults and disablements

• Possible to change to different event windows

• On-wall mounting

• Conforms to EN 54 regulations

• Conforms to CE standards

• Designed to meet the requirement of the major

maritime classification societies

Indicators

The panel provides the following indicators:

• Fire Symbol, Alarm Routing Activated, Fault,

Function Disabled, Test, System Fault, Power,

More Events

• Internal buzzer

Capacity

A maximum of 8 panels can be connected to the

detection loop.

Information Panel

The Information Panel serves as an indication device

only. It provides information related to the defined

operation zone(s).

The panel offers the following buttons:

• More Events button for scrolling through several

alarms within the same event window

• Next Window button for stepping to a new event

window, for example from Fire to Fault Warning

window.

• Lamp Test button for activating all indicators to be lit

for 5 seconds

The panels provides the following indicators:

• Fire / Alarm, Function Disabled, Function Delayed,

Testing, Power

• Internal buzzer

Description/Application

The Repeater Panel BU-BV-420 serves as both a Fire

Brigade Panel and an Information Panel.

Settings on a dipswitch determine the type of panel (see

dipswitch settings). The panels communicate with other

system units on the Ethernet-based local area network,

AutroNet.

The panel has an 16 x 40-character alphanumeric display.

Fire Brigade Panel

This panel displays alarms and allows you to operate

alarms and receive additional information related to the

relevant operation zone. To operate alarms, a fireman’s

key must be used (access level 2).

The panel is used to silence sounders and to reset alarms

within a defined operation zone.

The panel provides the following buttons:

• More Events button

• Mute Panel button

• Silence Alarms button

• Reset System button

The panels provides the following indicators:

• Fire, More Events, Fire Brig. Signalled, Fault, Function

Disabled, Testing, System Fault, Power

• Internal buzzer

The Repeater Panel BU-BV-420 serves as both a Fire

Brigade Panel and an Information Panel.

Settings on a dipswitch determine the type of panel (see

dipswitch settings). The panels communicate with other

system units on the Ethernet-based local area network,

AutroNet.

The panel has an 16 x 40-character alphanumeric display.

Features

• User-friendly display and operator controls

• Scroll function for more alarms

• Backlit operational buttons. Text display suitable for

full darkness operation

• Possible to change to different event windows

• Surface or flush mounting

• Rack mounting in standard 19’’ cabinets and flush

mounting in consoles

• Conforms to CE standards

• Designed to meet IEC 61508 SIL2 requirements,

CEN, EN 54-2. EN 54-4 and EN 54-13 regulations, FM

regulations (Factory Mutual) and the maritime SOLAS

requirements (Safety Of Life At Sea)

Description

BS-430 serves as an operating panel for one or several defined

operation zones.

All alarm handling and system features can be controlled and

monitored from the panel. A restricted scope of operation may

be configured.

The panel communicates with controllers and the entire system

via the Ethernet-based local area network; AutroNet.

The panel is menu operated on a 16-line display, with 40

characters per line.

Indicators

• 16 x 40-character alphanumeric display

• Fire, More Events, Fire Brig. Signalled, Fault, Function

Disabled, Testing, System Fault, Power, Function Delayed,

Alarms Fault, Fire Brig. Fault, Alarms Disabled, Fire Brig.

Disabled, Detector Inhibit, Extinguishing Activated,

Extinguishing Isolated, Local Mode, Dual Safety Stdby,

MultiS SmokeDis

• Internal buzzer

Features

• SelfVerify function for automatic testing of detectors

• Automatic addressing of detectors

• User-friendly display and operator controls

• Backlit operational buttons. Text display suitable for full

darkness operation

• Surface mounting on wall or flush mounting in wall

• Rack mounting in standard 19’’ cabinets and flush mounting

in consoles

• Conforms to CE standards

• Designed to meet IEC 61508 SIL2 requirements,

CEN, EN 54-2. EN 54-4 and EN 54-13 regulations, FM

regulations (Factory Mutual) and the maritime SOLAS

requirements (Safety Of Life At Sea)

Operator Controls

• More Events, Mute Panel, Silence Alarms, Reset System,

Menu, Close Window

• Keyboard with alphanumeric characters and scroll function

• Separate buttons for menu operation (manoeuvre buttons)

• Backlit buttons and text