Welcome to the official website of CNIACS Automation Technology Co., Ltd!
0
May 20, 2026 BY
IN B&R

B&R X20IF10G3-1 Supported protocols and functions

Supported protocols and functions

Supported protocols:

• File access over EtherCAT (FoE object)

• Complete access (supported since firmware version 18)

° Enabled: Objects are read or written with all existing subindices.

° Disabled: Objects are only read or written with the specific subindex.

Additional supported functions:

• 32-bit “distributed clocks” function

Unsupported functions:

• Reading and writing a logical memory area (LRW)

Firmware

The module comes with preinstalled firmware. The firmware is part of the Automation Studio project. The

module is automatically brought up to this level.

A hardware upgrade must be performed to upgrade the firmware included in Automation Studio (see Help

“Project management – Workspace – Upgrades” in Automation Help).
May 20, 2026 BY
IN B&R

B&R EtherCAT is an Ethernet-based fieldbus developed by Beckhoff

EtherCAT

EtherCAT is an Ethernet-based fieldbus developed by Beckhoff. This protocol is suitable for both hard

and soft real-time requirements in automation technology. In addition to a ring structure, which becomes

logically necessary because of the summation frame telegram used, the EtherCAT technology also phys

ically supports topologies such as line, tree, star (limited) and combinations of these topologies. B&R’s

X20BC80G3 (expandable bus controller module) and X20HB88G0 (standalone junction base module) are

available for implementing these topologies.

EtherCAT slave devices take the data designated for them from a telegram as it is passing through the

device. Input data is also added to the telegram as it is passing through.

Master systems without FoE (File access over EtherCAT) support require an appropriate configuration tool

to transfer the configuration (optional).

Error codes

The module returns an error code if an error occurs. A complete list of all error codes in PDF format is avail

able in under item “Communication_Error” in section “Communication / Fieldbus systems / Support with

FDT/DTM / Diagnostic functions / Diagnostics on the runtime system / Master diagnostics” in Automation

Help.
May 20, 2026 BY
IN B&R

B&R X20IF10G3-1 Module description

Module description

The interface module is equipped with an EtherCAT interface. This allows the B&R system (I/O modules,

POWERLINK, etc.) to be connected to systems from other manufacturers and makes it possible to quickly

and easily transfer data in both directions.

The interface is equipped with 2 RJ45 connections. Both connections result in an integrated switch. This

makes it easy to implement daisy chain cabling.

Functions:

• EtherCAT slave

• Error monitoring

EtherCAT

EtherCAT is an Ethernet-based fieldbus developed by Beckhoff. This protocol is suitable for both hard and

soft real-time requirements in automation technology.

Error monitoring

The status of the module and fieldbus is monitored. An error code is returned if an error occurs.
May 20, 2026 BY
IN B&R

B&R X20CM0985 X20 Synchronization Unit

The resulting measured values include the pure phase current; line-to-line voltage or phase

voltage; the effective, reactive and apparent power parts; the mains frequency; the power

factor and much more. In addition, peak values and energy meters are stored on the module

in nonvolatile memory. Depending on the configuration, it is also possible to use a digital

output as a pulse encoder for an external energy meter.

The synchronization unit doesn’t just take the phasing and phase voltage into consideration;

integrated intelligence also monitors the rate of change and other parameters, allowing them

to influence when the synchronization output is switched. It is also possible to monitor a

generator using a large number of additional conditions. A total of 4 voltage inputs provide

substantial overall flexibility.

Monitoring functions expand the features of the module. Dependent overcurrent monitoring is

included, which utilizes the thermal capacity of the motor/generator to allow short overloads

while still providing full protection. The dependent, delayed imbalanced load monitoring used

to protect three-phase generator and three-phase networks from imbalanced load can be

adapted to the characteristics of different generator types using parameters while taking their

special thermal time constants into account.
May 20, 2026 BY
IN B&R

B&R X20CM0985 X20 energy measurement and synchronization module

Material number:

X20CM0985

Description:

• Energy measurement for 120 to 480 VAC

• Simultaneous measurement of 2 AC mains networks plus 2 additional voltages

• For multifunctional measurement tasks

• Intelligent mains synchronization unit

The module has a compact size and combines a power measurement module that has

special features with a synchronization unit that is able to meet all demands.

The measurement unit’s 3 current inputs are suitable for both X: 1 A and X: 5 A current

transformers. Overcurrent resistance and the high resolution of the measurement unit

round off its features. For the voltage inputs, the value range can be configured between

480 VAC and 120 VAC.

The area of use includes 4-wire AC networks with a phase voltage up to 480 VAC and

3-wire systems, whereas L2 can be grounded (V-connection). The module can also handle

Aron measuring circuits.
May 20, 2026 BY
IN Prosoft

Prosoft PLX51-HART-4O 4 Channel HART Output Module

The PLX51-HART-4O allows users to easily connect their existing HART

compatible field devices to EtherNet/IP™, Modbus® TCP/IP, and DNP3

Ethernet networks. The module can be used to connect HART Output

devices such as valve positioners into an Ethernet network.

The PLX51-HART-4O supports up to 4 channels of HART communication,

as well as Analog 4-20 mA signals for real-time process variables to/from

the HART-compatible device.

Features

♦ Support for point-to-point networks with EtherNet/IP, Modbus TCP/IP

or DNP3 (TCP/IP and UDP) protocols

♦ Support for point to multipoint networks with EtherNet/IP and Modbus

TCP/IP protocols

♦ Support for automatic configuration in Multidrop mode for Logix Controllers

♦ Support for PCCC (AB-ETH) protocol, allowing legacy controllers to easily

interface to HART modules

♦ Support for Factory Talk View for point to point and multidrop HART devices

♦ EtherNet/IP enables a HART device to be added directly into a Rockwell

Automation® Logix I/O tree

♦ Modbus TCP/IP enables a HART field device to be viewed as a Modbus

Slave device

♦ DNP3 converts a HART field device into a DNP3 Outstation (slave) supporting

Secure Authentication

♦ DTM (Device Type Manager) / HART Pass-through is available for simplifying

device configuration and management using an FDT frame

♦ Built-in Web server provides detailed diagnostics of system configuration and

operation as well as field device diagnostics

♦ Can be used in a redundant ControlLogix® controller system

♦ Advanced Diagnostics automatically extracted and written to Logix Tags
May 20, 2026 BY
IN Prosoft

Prosoft PLX51-PBS PROFIBUS DP Slave to EtherNet/IP™, Modbus® TCP/IP, or Modbus® Serial Gateway

Modbus® Serial networks for PROFIBUS DP networks by operating as a PROFIBUS

DP slave.

For easy integration to a Rockwell Automation Controller, the gateway and

configuration software create dynamic AOI’s based on the user configuration to add

logical tag names to the PLC project file. Thus, reducing programming time.

For configuration of Modbus TCP/IP or Modbus Serial Networks, the module will

automatically map PROFIBUS DP data points to registers on a Modbus network.

With advanced tools such as a built in PROFIBUS DP packet capture utility,

PROFIBUS DP network commissioning time can be greatly reduced.

Dual Ethernet ports of the module can support either DLR (Device Level Ring)

topology, or can be used as an embedded switch for flexible installation options.

With support for up to 1536 bytes of Input and Output data, and up to 4 EtherNet/IP

connections back to the processor, this module provides performance and data

throughput for even the most demanding of PROFIBUS applications.

As a PROFIBUS DP slave device, the module can emulate from 1 to as many as 10

slave DP nodes, providing up to 1536 bytes of Input and Output Cyclic I/O data

between EtherNet/IP devices and a PROFIBUS DP master. This eliminates the need

for using DPV1 messaging when more than 244 bytes of data needs to be exchanged

between a PROFIBUS master and an EtherNet/IP network.
May 20, 2026 BY
IN Prosoft

Prosoft PLX51-PBS PROFIBUS DP Slave drive Features

Features

 Supports DLR for EtherNet/IP networks

 Support for either EtherNet/IP, Modbus TCP/IP, or Modbus Serial Communication networks

 PROFIBUS slave OR multi-slave support

 PROFIBUS packet capture tool built in

Configuration

The PLX50 Configuration Utility software is used for configuration and troubleshooting of

the module. The stand-alone configuration utility allows users to define the setup and

configuration of the PROFIBUS DP module, connections with Rockwell Automation controllers

and devices over EtherNet/IP, and build custom Add-On Instructions (AOIs) to be imported

into Studio 5000 applications.

With the ability to import custom AOI’s into the Studio 5000 environment and advanced

PROFIBUS DP tools such as the packet capture utility, commissioning time of a network

can be greatly reduced.
May 20, 2026 BY
IN Prosoft

Prosoft PLX51-PBS EtherNet/IP™ Server (Class 1 Adapter)

EtherNet/IP™ Server (Class 1 Adapter)

As an EtherNet/IP server, the gateway operates as an Adapter with up to 4 Class 1 I/O

connections to a Controller (Scanner) on an EtherNet/IP network. The use of

EtherNet/IP Class 1 I/O connections for transfer of PROFIBUS DP cyclic data, provides

fast data transfer between networks for increased performance on time critical

PROFIBUS DP applications.

EtherNet/IP Client

As an EtherNet/IP client, the module can generate Get Attribute, Set Attribute, Set

Static, or Custom messages using either Class 3 messaging or UCCM messaging on

EtherNet/IP. With support for up to 5 unique devices on one module and a total of up to

50 mapping functions, this functionality allows EtherNet/IP devices such as Overload

Protection Relays and Variable Frequency Drives to be mapped onto a PROFIBUS DP

network.
May 20, 2026 BY
IN Prosoft

Prosoft PLX51-PBS PROFIBUS DP Slave to EtherNet/IP™

Modbus TCP/IP

On a Modbus TCP/IP network, the module will operate as either a Modbus TCP/IP

Client or Server device.

As a Modbus TCP/IP client the module can be configured to automatically read/write all

PROFIBUS DP data with a slave device for easy setup and configuration, or the

Modbus Auxiliary Map feature will allow you to configure data transfer to customize the

mapping to meet specific application requirements.

As a Modbus TCP/IP Server all information from the PROFIBUS DP network is stored in

continuous registers in the module for easy configuration and efficient mapping of data

to a Modbus TCP/IP client.

Modbus Serial

On a Modbus Serial network the module will operate as either a Master or a Slave

device supporting either RS232 or RS485 communication networks.

As a Modbus Serial Master the module can be configured to automatically read/write all

PROFIBUS DP data with a slave device for easy setup and configuration, or the

Modbus Auxiliary Map feature will allow you to configure data transfer to customize the

mapping to meet specific application requirements.

As a Modbus Serial Slave all information from the PROFIBUS DP network is stored in

continuous registers in the module for easy configuration and efficient mapping of data

to an attached master device.

Menu

Search for products

Back to Top
Product has been added to your cart